Download specification datasheet
Download Sales Flyer
|
Mobile |
|
Mobile module |
4G (LTE) – Cat 6 up to 300 Mbps, 3G – up to 42 Mbps |
SIM switch |
2 SIM cards, auto switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection (planned) |
Status |
Signal strength, SINR, RSRP, RSRQ, Bytes sent/received |
SMS |
SMS status, SMS configuration, send/read SMS via HTTP POST/GET, Email to SMS, SMS to Email, SMS to HTTP, SMS to SMS, SMS auto replay, scheduled SMS (planned), SMPP (planned) |
USSD |
Supports sending and reading Unstructured Supplementary Service Data messages |
Bridge mode |
Direct connection (bridge) between mobile ISP and device on LAN |
Wireless |
|
Wireless mode |
802.11ac (WiFi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA) |
WiFi security |
WPA2-Enterprise-PEAP, WPA2-PSK, WPA-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation |
ESSID |
ESSID stealth mode |
Wireless Hotspot |
Captive portal (Hotspot), internal/external Radius server, built-in customisable landing page |
Ethernet |
|
WAN |
1 x WAN port 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover |
Fibre |
1 x SFP port (cannot work simultaneously with Ethernet WAN port) |
LAN |
4 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover |
Console |
RS-232 (RJ45) console port for router configuration and debugging |
Network |
|
Routing |
Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP) |
VoIP passthrough support |
H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets |
Firewall |
Port forwards, traffic rules, custom rules |
Network backup |
VRRP, Mobile, Wired, Fiber and WiFi WAN options, each of which can be used as an automatic Failover |
Load balancing |
Balance Internet traffic over multiple WAN connections |
OpenVPN |
Multiple clients and a server can run simultaneously, 12 encryption methods |
Power |
Connector: 2 x 4 pin industrial DC power sockets for main and redundancy power sources
Input voltage range: 9 – 50 VDC, reverse polarity protection, voltage surge/transient protection
Power consumption: idle: <3W, max: 18W |
Antennas |
2 x SMA for LTE, 2 x RP-SMA for WiFi |
Physical |
Dimensions (W x H x D) 272 x 42.6 x 122.6 mm
Weight: 1050g |