^

RUT206 RUT206 RUT206 RUT206 What's in the box RUT206 RUT206 RUT206 RUT206 RUT206

v

<<

>>

Click the image to enlarge

RUT206 Teltonika Industrial 4G/LTE CAT4 Router

  • 4G/LTE CAT4 with speeds up to 150Mbps, & backwards compatible with 3G, 2G
  • WiFi 4 (802.11b/g/n) 2.4 GHz
  • Antenna connectors: x2 Mobile SMA, x1 WiFi RP-SMA, Indoor antennas NOT included
  • x2 10/100 Mbps Ethernet ports (x1 WAN, & x1 LAN)
  • RS232 & RS485 for serial communication
  • x2 internal SIM card slots (Mini SIM-2FF)
  • Expandable data storage via a Micro SD Card slot (internal)
  • A Power Supply is not included as typically PoE powered (Suggested PSU if needed: TL-PR3PRUK6 )
  • Mounting options: DIN-rail, Wall mount, Flat surface, (Additional kits required)
  • Configure & monitor remotely via Teltonika's Remote Management System (RMS)
  • Ideal Router for a range of IoT and M2M applications
  • Manufactured in Europe
Do you need a SIM Card?
CLICK HERE

Authorised Distributor

»

Buy Now

TL-RUT206

RUT206 Teltonika 4G Router.

Buy Now

TL-RUT206 & 12 Months Remote Management System Credits

In the 'extra information' section on the check out page, please provide us with an Admin email address. Teltonika RMS Info

Overview

The RUT206 is a compact industrial router that supports RS232 and RS485 serial interfaces, along with both active and passive PoE inputs. Its rugged design, 2-pin power input, and expandable data storage via a microSD slot make it an ideal choice for a range of IoT and M2M applications. This 4G Cat 4 router comes with RutOS open-source software and supports key industrial protocols like Modbus, DNP3 and DLMS.

Specification
Specification Datasheet
 
Mobile Module 4G/LTE: CAT4 150 Mbps Download, 50 Mbps Upload.
3G: 21 Mbps Download, 5.76 Mbps Upload.
2G: 236.8 Kbps Download, 236.8 Kbps Upload.
Ethernet x1 WAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover.

x1 LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover.
PoE IN PoE IN: Active PoE input 802.3af Class 0 on LAN port.
Power

• Power Supply NOT included  (If needed - Recommended: TL-PR3PRUK6).
Can also be powered by an Ethernet cable via the LAN port. (View more information on the RUT206 powering options here).

• Connector: 2-pin industrial DC power socket.

• Input voltage range: 9-57 VDC, reverse polarity protection, surge protection >58V @10us min.

• Power consumption: Idle: < 2W  /  Max: < 3.5W.

• Passive PoE over spare pairs 4,5 (+) / 7,8 (-). Possibility to power up through LAN port, passive PoE voltage: 16-57 VDC.
Wireless mode • WiFi 4 (802.11b/g/n).
• Access Point (AP).
• Station (STA).
WiFi Users Up to 50 simultaneous connections.
WiFi Security WPA2-Enterprise: PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes, client separation, EAP-TLS with PKCS#12 certificates, disable auto-reconnect, 802.11w Protected Management Frames (PMF).
SSID / ESSID SSID stealth mode and access control based on MAC address.
Antenna Connectors

• x2 SMA (male) connectors for Mobile.
• x1 RP-SMA (male) connector for WiFi.

Please be aware: Antennas are NOT included and will need to be purchased separately.
See our range of antennas here:
Indoor Antennas
Outdoor Antennas
SIM x2 internal SIM card slots (Mini SIM-2FF), 1.8 V/3 V, internal SIM holders, double-stacked SIM tray.
(*Panel of Router needs to be removed to access x2 SIM Card slots).
Modbus

• Supported modes: Server, Client.

• Supported connection types: RTU (RS232, RS485), TCP.

• MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality.

• Supported data formats: 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (bigendian), DCBA (little-endian), CDAB, BADC), HEX, ASCII.
Serial

• RS232: RS232 interface without flow control signals.

• RS485: Half duplex (2-wire) RS485 interface.
CPU Mediatek, 580 MHz, MIPS 24KEc.
RAM 128 MB, DDR2.
Flash Storage 32 MB, NOR Flash.
SD Card

• Size: Micro SD (internal slot).

• Applications: Samba share.

• Capacity: Up to 2TB.

• Storage formats: FAT32, NTFS, ext2, ext3, ext4.
Operating temperature -40 °C to 75 °C
Dimensions  83 x 25 x 83 mm  (W x H x D).
Weight 132 g
Mounting Options • DIN rail
• Wall mount
• Flat surface
(Additional kits required).
What's in the box • RUT206 Router.
• x1 2-PIN terminal block.
• x1 2x3-PIN terminal block.
• SIM card size adapter kit.
• Hex Key.
• Quick Start Guide.
 
Specifications on this product page are correct as of: 04/08/2026.
For more information about this product, please visit the manufacture's website: RUT206
Downloads
Quick Start Guide Click here 06.06.2025
User Manual Click here 06.06.2025
How To Guide: Activate second SIM slot on Teltonika Router Download here 17.04.2026
How To Guide: Change APN settings in Teltonika Routers Click here 06.06.2025
How To Guide: Using your Teltonika Router with Starlink Download here 06.06.2025
How To Guide: Set-up Multiple WANs in Teltonika Routers Download here 06.06.2025
How to Guide: Configuring event reporting emails to work with Gmail Download here 18.09.2025
RUT206 Teltonika Wiki Click here 06.06.2025
The latest firmware can be found on the Teltonika website Click here 06.06.2025
UK Declaration of Conformity Download here 09.06.2025
EU Declaration of Conformity Download here 09.06.2025
RUT206 Teltonika Certification & Approvals Click here 09.06.2025
Reviews
Brochures
Teltonika Product Comparison Table Click here
RUT206 Sales Flyer Download here
Videos
Mounting Options for Teltonika Devices

Video - Teltonika: Mounting Options for Teltonika Devices

A variety of options for mounting your Teltonika device.

LTE Router Classifications

Article: Mobile Router Classifications Chart & Speeds

LTE, or Long Term Evolution, is the predominant form of mobile technology available in the UK; the types of equipment that utilise this technology are divided into different classifications...

4G & 5G Podcast

Video - Podcast: Acronyms & Letters surrounding 4G & 5G and what their meanings are

What are category classifications and their download speeds? How many antennas on a mobile router? Would you be better off with a higher category 4G router than investing in a 5G router? Find out in this episode of the Solwise podcast.

Remote Managemant System Explained

Article: Teltonika Remote Management System Explained

Teltonika’s Remote Management System (RMS) is a powerful online IoT platform, allowing users to remotely monitor and manage all their compatible Teltonika devices. From 4G/5G routers to IoT gateways to Access Points, RMS can be used to control a wide variety of Teltonika devices with great convenience.

How to configure APN settings for SIM cards on Teltonika Routers

Video: How to configure APN settings for SIM cards on Teltonika Routers

LTE mobile routers sometimes need APN settings inputted manually to work with SIM cards. This video goes over how to access the web UI of a Teltonika router and configure the correct APN settings accordingly.

Accessories

<

>

X