| Specification Datasheet |
| |
| Mobile Module |
4G LTE: CAT4 150 Mbps Download, 50 Mbps Upload.
3G: 21 Mbps Download, 5.76 Mbps Upload.
2G: 236.8 Kbps Download, 236.8 Kbps Upload. |
| Ethernet |
x1 WAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover.
x1 LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover. |
| PoE IN |
PoE IN: Active PoE input 802.3af Class 0 (12.94 W) on LAN port. |
| Power |
• Power Supply NOT included (If needed - Recommended: TL-PR3PRUK6).
Can also be powered by an Ethernet cable via the LAN port. (View more information on the RUT204 powering options here).
• Connector: 2-pin industrial DC power socket.
• Input voltage range: 9-57 VDC, reverse polarity protection 100 V max, surge protection min 64.4 V/max 71.2 V breakdown voltage, 93.6 V max reverse voltage @ 4.3 A max reverse surge current.
• Power consumption: Idle: < 2W / Max: < 3.5W.
• Passive PoE over spare pairs 4,5 (+) / 7,8 (-). Possibility to power up through LAN port, passive PoE voltage: 16-57 VDC.
|
| Wireless mode |
• WiFi 4 (802.11b/g/n).
• Access Point (AP).
• Station (STA). |
| WiFi Users |
Up to 50 simultaneous connections. |
| WiFi Security |
WPA2-Enterprise: PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes, client separation, EAP-TLS with PKCS#12 certificates, disable auto-reconnect, 802.11w Protected Management Frames (PMF). |
| SSID / ESSID |
SSID stealth mode and access control based on MAC address. |
| Antenna Connectors |
Indoor antennas NOT included.
• x2 SMA (male) connectors for Mobile.
• x1 RP-SMA (male) connector for WiFi.
• x1 SMA (male) connector for GPS / GNSS. |
| eSIM |
eSIM (Data plans not included).
Read our article to learn more: 'What is an eSIM?'.
|
| SIM |
x2 internal SIM card slots (Mini SIM-2FF), 1.8 V/3 V, internal SIM holders, double-stacked SIM tray.
(*Panel of Router needs to be removed to access x2 SIM Card slots). |
| Modbus |
• Supported modes: Server, Client.
• Supported connection types: RTU (RS232).
• Custom registers: MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality.
• Supported data formats: 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (bigendian), DCBA (little-endian), CDAB, BADC), HEX, ASCII.
|
| Serial |
• RS232: RS232 only TX and RX signals.
• CAN: Integrated CAN interface.
• Serial functions: Console, Serial over IP, Modem, MODBUS gateway, NTRIP Client.
|
| CPU |
Mediatek, 580 MHz, MIPS 24KEc. |
| RAM |
128 MB, DDR2. |
| Flash Storage |
32 MB, NOR Flash. |
| SD Card |
• Size: Micro SD (internal slot).
• Applications: Samba share.
• Capacity: Up to 2TB.
• Storage formats: FAT32, NTFS, ext2, ext3, ext4.
|
| Operating temperature |
-40 °C to 75 °C |
| Dimensions |
83 x 25 x 83 mm (W x H x D). |
| Weight |
140 g |
| Mounting Options |
• DIN rail
• Wall mount
• Flat surface
(Additional kits required). |
| What's in the box |
• RUT204 Router.
• x1 2-PIN terminal block.
• x1 2x3-PIN terminal block.
• Ethernet cable.
• SIM card size adapter kit.
• Hex Key.
• Quick Start Guide. |
| |
Specifications on this product page are correct as of: 28/07/2026.
For more information about this product, please visit the manufacture's website: RUT204 |