
Guide to cables & connectors
Connectors for WiFi Coax Cable
We offer a cable making service or you can buy the tools to make the cables yourself. If you have a lot of cables to make, it is certainly more cost effective for you to make your own cables, we have a range of tools and cable to suit most needs.
Please note: We supply a number of connectors that are gold plated. Please note that if it is not mentioned in the description, then it is not gold plated.
Connectors for HDF/LMR®* 200 (Cable loss of 0.5dB/m at 2.4 GHz)
Connectors for HDF/LMR®* 400 (Cable loss of 0.2dB/m at 2.4 GHz)
All of our connectors have VSWR less than or equal to 1.3 (at both 2.4 and 5.8 GHz frequencies) which equates to a Transmission Loss of about 0.15dB at 5GHz or 0.1dB at 2.4GHz. They are generally suitable for wireless operation in the range 0-10GHz.
Click here for our Cable Making Manual
Filter page by connector usage:
Filter products by connector type:
N-Type & Reverse N-Type Connectors
N-Type 200 Plug
CON-N-TO-200-CRIMP

N-Type plug connector with male pin.
TOOL-CR-336G Crimp Tool Required
N-Type 200 Socket
CON-NSK-200-CRIMP

(Socket connector with female pin)
TOOL-CR-336G Crimp Tool Required
Reverse N-Type 200 Plug
CON-RN-TO-200-CRIMP

(plug connector with female pin)
TOOL-CR-336G Crimp Tool Required
SMA & Reverse SMA Connectors
Reverse SMA 200 Plug
CON-RSMA-200-PLUG

(male connector with female pin) Gold Plated.
TOOL-CR-336Y Crimp Tool Required
Reverse SMA 200 Socket
CON-RSMA-200-SKT

(female connector with male pin)
TOOL-CR-336Y Crimp Tool Required
TNC & Reverse TNC Connectors
Reverse TNC 200 Plug
CON-RTNC-200-PLUG

(male connector with female pin)
TOOL-CR-336G Crimp Tool Required
Filter products by connector type:
N-Type & Reverse N-Type Connectors
N-Type 400 Plug (Clamp Style)
CON-N-400-CLAMP

Clamp version of N-Type Plug for HDF/LMR® 400 cable — No crimping required.
Simple assembly to give water protected connection.
Centre pin needs to be soldered (or crimped if preferred).
Reverse N-Type 400 Plug
CON-RN-400CRIMP

(plug connector with female pin)
TOOL-CR-336K Crimp Tool Required
SMA & Reverse SMA Connectors
Reverse SMA 400 Plug
CON-RSMA-400-PLUG

(male connector with female pin)
TOOL-CR-336K Crimp Tool Required
TNC & Reverse TNC Connectors
Reverse TNC 400 Plug
CON-RTNC-400-PLUG

(male connector with female pin)
TOOL-CR-336K Crimp Tool Required
*LMR ® Is a registered trademark of Times Microwave Systems