
Pheenet WAP-654G
IEEE802.11g 54Mbps 200mW High Power Access Point with Client, Repeater, P2P, PMP, Detachable Antenna, Reverse SMA Connector. Realtek Chipset.
PheeNet WAP-654G is an IEEE 802.11g 54Mbps High Power AP / Bridge with 2.4 GHz Frequency. Not only WEP Security, it also has advanced WPA, WPA2, IEEE802.1x, Disable SSID Broadcast, MAC Address filtering to ensure the security of Wireless LAN.
WAP-654G equipped with Dipole Antenna with 2dBi Gain (Reverse SMA Connector) and its High power availability 200mW enables user to build a convenient, efficient, and bigger coverage wireless network. Moreover, the WAP-654G can be set as AP, Bridge, Client, Repeater, and compatibilities of Win 98,Win2000,WinME, and Win XP operation systems provide more flexibility and mobility to users. For home users and small enterprises, it is no doubt that WAP-654G is an ideal device to build a wireless LAN network
|
|
Stock Code |
Notes |
NET-WAP-654G |
|
|
|
|
Download Specification Datasheet |
1. 6 Operation Modes : Access Point, Repeater(WDS) ,Bridge, Client Bridge, Point-To-Point, Point-To-Multi-Point
2. Support AP/Bridge Mode simultaneously
3. Fully Backwards Compatible with all 802.11b Wireless Network
4. 54Mbps, Up to 5X Faster than 802.11b Products
5. Support 200mW High Power
6. Wireless Distribution System(WDS) when running in Repeater mode
7. Maxmum Wireless Security with 802.1x, WPA, and AES
8. Maxmum Internet Security with IPSEC (DES,3DES,AES-128)
9. Support TPC
10. Support Signal Strength |
Industrial Standard |
Standard |
IEEE 802.11g
IEEE 802.11b
IEEE 802.11
IEEE 802.3u 100Base-TX Fast Ethernet
ANSI/IEEE 802.3 N-way Auto-Negotiation |
Interface |
100/10 Base-TX (RJ-45) x 1 |
Security |
- 802.1x, WEP,WPA TKIP, WPA2 AES/Mixed mode for PSK and TLS(Radius)
-WDS supported with WEP,TKIP and AES encryption
- Wireless access control by MAC address (deny or accept) |
RF |
Frequency Band |
2.412~2.472 GHz ISM band |
Signal Type & Modulation |
802.11g: OFDM (64QAM, 16QAM, QPSK, BPSK)
802.11b : DSSS(CCK, DQPSK,DBPSK) |
Antenna |
1 x detachable Antenna (Reverse SMA Connector) |
Output Power |
200mW |
Transmit Power Variation
|
100%, 50%, 25%, 10%, 5% |
Sensitivity |
802.11b
1Mbps: -91dBm, 2Mbps: -90dBm, 5.5Mbps:-89dBm, 11Mbps:-87dBm
802.11g
6Mbps:-84dBm, 9Mbps:-82dBm, 12Mbps:-79dBm, 18Mbps:-77dBm, 24Mbps:-75dBm, 36Mbps:-73dBm, 48Mbps:-70dBm, 54Mbps:-68dBm |
Channels
|
By Country (IEEE802.11d) |
Operating Mode |
AP Mode : 802.11b/g Access Point(AP)
Repeater Mode: WDS Repeater , Universal Repeater
Bridging Mode : P2P, PTMP,
Client Mode :
Ad-Hoc and infrastructure mode
Support Radius client used in client mode
Support site survey scan and manual connect
Support MAC Clone |
Management |
Web configuration |
Hardware |
Base Platform
|
RL8186+ RL2560 (MIPS R3000 ISA-1 ) |
Clock Speed
|
200 MHz |
Reset Switch Built-in
|
Push-button momentary contact switch |
SDRAM
|
On board : 8Mbytes |
Flash
|
On board : 2Mbytes |
Built-In LED Indicators
|
Power Status always On / Blinking: while upgrading firmware
Ethernet On: Blinking: Active
Wireless Blinking : Active |
Environment
|
Operating Temperature:0~50C
Storage Temperature:0~70C
Humidity: 5%~95%(non condensing) |
Power Supply
|
12 VDC, 1A input |
Dimensions
|
112 (L) x 73(W) x 31(H) (mm) |
|
|