Discontinued Item

^

WAP-3954NP-C

v

ADSL-DL4323D

<<

>>

Click the image to enlarge

WAP-3954NP-C

Pheenet 11bgn Ceiling Access Points - Managed option

  • IEEE802.11n High Power Ceiling Access Point
  • Gigabit
  • IEEE802.3af Pover Over Ethernet Built-in
  • Smoke detector / Ceiling Mount appearance to minimize visibility
  • Ideal for public areas such as coffee shops, shopping centres and conference facilities

WAP-3954NP-C

 

Overview

The WAP-3954NP-C can be installed and configured easily into any new wireless network or integrated within an existing wired network resulting in a more flexible and cost-effective wireless deployment. You can centrally manage the WAP-3954NP-C via a Web browser or an SNMP MIB browser or PheeNet's Network Access Gateway / Controller WMS-308N.

With a built-in IEEE802.3af Power over Ethernet port, power and data are supplied to the unit using CAT5 Ethernet cable from Central IEEE802.3af POE Switch.

While integrating with the Network Access Gateway / Controller WMS-308N the PheeNet WAP-3954NP-C is the ideal IEEE802.11bgn Indoor Ceiling Wireless Access Point for Public Wifi User Service Management in Hotels, Hostels, Hospitals and other public places.

Specification
Download specification datasheet
Standard IEEE802.11n
IEEE 802.11g
IEEE 802.11b
Frequency Band 2.412 ~ 2.484GHz
Modulation IEEE802.11b：DSSS (DBPK,DQPSK,CCK)
IEEE802.11g：OFDM(64-QAM,16-QAM,QPSK,BPSK)
IEEE 802.11n：(OFDM(64-QAM, 16-QAM, QPSK, BPSK)
Security WEP (64/128/152 Bit)
WPA-PSK(AES+TKIP) / (802.1x , RADIUS)
WPA2(PSK(AES+TKIP) / (802.1x , RADIUS)
802.1x (64/128 Bit)
User Isolation
Hidden SSID
MAC Address Filtering (MAC ACL)
IEEE802.11 mixed mode support open and shared key
authentication
VLAN assignment on BSSID
VLAN assign to Front LAN
VLAN pass through to Front LAN
Network Integrity
Client to Client Isolation
AP to AP Isolation
Sensitivity 11b:
-90dBm@1Mbps, ±2dB
-88dBm@2Mbps, ±2dB
-86dBm@5.5Mbps , ±2dB
-83dBm@11Mbps, ±2dB
11g:
-86dBm@6Mbps, ±2dB -84dBm@9Mbps, ±2dB
-82dBm@12Mbps , ±2dB -80dBm@18Mbps, ±2dB
-78dBm@24Mbps, ±2dB -75dBm@36Mbps, ±2dB
-72dBm@48Mbps , ±2dB -70dBm@54Mbps, ±2dB
11n:
MCS HT20 HT40
0 -85dBm, ±2dB -83dBm, ±2dB
1 -83dBm, ±2dB -81dBm, ±2dB
2 -81dBm, ±2dB -79dBm, ±2dB
3 -80dBm, ±2dB -76dBm, ±2dB
4 -78dBm, ±2dB -72dBm, ±2dB
5 -74dBm, ±2dB -69dBm, ±2dB
6 -71dBm, ±2dB -65dBm, ±2dB
7 -67dBm, ±2dB -62dBm, ±2dB
8 -85dBm, ±2dB -83dBm, ±2dB
9 -83dBm, ±2dB -81dBm, ±2dB
10 -80dBm, ±2dB -78dBm, ±2dB
11 -78dBm, ±2dB -75dBm, ±2dB
12 -75dBm, ±2dB -71dBm, ±2dB
13 -71dBm, ±2dB -69dBm, ±2dB
14 -68dBm, ±2dB -64dBm, ±2dB
15 -65dBm, ±2dB -61dBm, ±2dB
Antenna Built-in 2dBi Omni Antenna
EIRP 802.11b – 26±1.5dBm
802.11g – 23±1.5dBm
802.11n – 22±1.5dBm (HT20)
802.11n – 20±1.5dBm (HT40)
Transmit Power
Control		 Range 1-100
Channels 802.11b/g/n : 11 for FCC,14 for Japan,13 for Europe, 2 for
Spain, 4 for France
Operating Mode AP Mode
WDS Mode (Bridge /Repeater)
AP Client Mode
QOS IEEE 802.1p /COS
IEEE 801.11e WMM
IEEE 802.11D Spanning Tree
Management Web-based administration
Firmware upgrade by Web GUI
Remote Link Test –Display connect statistics
Event Log
Support DHCP Client
NTP Time synchronization
Support Statistics on total transmission encountered and transmitting error occurred
Hardware
Base Platform Ralink RT3052F
Interface WAN: 10/100/1000BASE-TX auto-negotiation Ethernet port
x 1 (RJ-45 connector) ; Auto MDI/MDI-X
Support 48VDC IEEE 802.3af Active Power Over
Ethernet X 1
LED 1x LAN, 1x WLAN
Environment Operating Temperature:-20~50℃
Storage Temperature:-20~70℃
Humidity: 5%~90%(non condensing)
Power Supply Power Over Ethernet (48V/0.125 A)
System Power Consumption: 4.5W
Dimensions 125mm diameter x 64mm depth
Weight 150g
Downloads
Reviews
Brochures
Videos
Accessories

<

>

X