Discontinued item

^

WAP-1954NP-C

v

ADSL-DL4323D

<<

>>

Click the image to enlarge

WAP-1954NP-C

Pheenet High Power ceiling Access Point

  • IEEE802.11bgn High Power In-Ceiling Access Point
  • Gigabit LAN port with PoE
  • IEEE802.3af PoE Built-in (injector not included)
  • 8 Multiple SSID with VLAN
  • Centralised AP Management (using WAS-308)

WAP-1954NP-C

 

Overview

The PheeNet WAP-1954NP-C IEEE802.11bgn High Power Indoor Ceilng Wireless AP with IEEE802.3af POE is designed to fit into the Ceiling, and bring WiFi wireless connection.

 

The WAP-1954NP-C can be installed and configured easily into any new wireless network or integrated within an existing wired network resulting in a more flexible and cost-effective wireless deployment. And, a network administrator can centrally manage the WAP-1954NP-C via a Web browser or an SNMP MIB browser or PheeNet’s Network Access Gateway / Controller WMS-308N or PheeNet’s Wireless Switch WSW-1808A. With built-in IEEE802.3af POE Ethernet port, power and data are supplied to the unit using CAT5 Ethernet cable from Central IEEE802.3af POE Switch.

 

While integrating with Network Access Gateway / Controller WAS-308N for AP and User Management the PheeNet WAP-1954NP-C is the best IEEE802.11bgn Indoor Ceiling Wireless AP for Public Wifi User Service Management in Hotels, Hostels, Schools, Colleges, Hospital, etc.
Specification
Download specification datasheet
Standard IEEE802.11n IEEE 802.11g IEEE 802.11b
Frequency Band 2.412 ~ 2.484GHz
Modulation

IEEE802.11b: DSSS (DBPK,DQPSK,CCK)

IEEE802.11g: OFDM(64-QAM,16-QAM,QPSK,BPSK)
IEEE 802.11n:(OFDM(64-QAM, 16-QAM, QPSK, BPSK)
Security

WEP (64/128/152 Bit)
WPA-PSK(AES+TKIP) / (802.1x , RADIUS) WPA2(PSK(AES+TKIP) / (802.1x , RADIUS)
802.1x (64/128 Bit) User Isolation Hidden SSID
MAC Address Filtering (MAC ACL)
IEEE802.11 mixed mode support open and shared key authentication
VLAN assignment on BSSID VLAN assign to Front LAN
VLAN pass through to Front LAN Network Integrity
Client to Client Isolation
AP to AP Isolation
Antenna Built-in 2dBi Omni Antenna
EIRP

802.11b – 26±1.5dBm
802.11g – 23±1.5dBm
802.11n – 22±1.5dBm (HT20)

802.11n – 20±1.5dBm (HT40)
Operating Mode

AP Mode
WDS Mode (Bridge /Repeater)
AP Client Mode
QoS

IEEE 802.1p /COS
IEEE 801.11e WMM
IEEE 802.11D Spanning Tree
Power Supply Power Over Ethernet (48V/0.125 A)
System Power Consumption: 4.5W
Dimensions 125mm diameter x 64mm depth
Downloads
     
Reviews
Brochures
Videos
Accessories

<

>

X