The 5/9/12V Power over Ethernet Splitter splits a networked PoE signal into separated power and 100Mbps or 1Gig LAN data sources. This device allows administrators to run 100Mbps or 1Gig speed PoE cables over long distances and then split the PoE signal into separated data and power sources in order to network non-PoE devices.
Save installation and equipment cost when installing access points, IP cameras and more in remote locations. No need to install network devices near a power outlet. This compact device safeguards valuable network equipment with short circuit protection and quickly creates an integrated PoE and non PoE network at Gigabit speeds.
Read our PoE white paper - Discusses PoE technology, what it's used for. How it works. Also discusses some of our PoE products.
|Download specification datasheet|
|Features||Automatically detects PoE terminals and supplies inline power.
Detects if PoE is pins 1236 or 4578
Compatible with 100meg or 1gig LAN
Easily install non-PoE devices where a power outlet is not available
Reduce installation and network equipment costs
Safeguards network device with short circuit protection
Adjustable output DIP switch for 5V, 9V, or 12V DC delivery
Converts Non-PoE devices to Power Over Ethernet Support
Auto-sensing power drawn from 802.3af power source equipment (PSE) devices
Supplies power up to 10-12 watts at 5, 9 or 12V DC
Light weight and compact size
|Data Rate||10/100/1000 Mbps|
|Input Power Requirement||1/2(+),3/6 (–) or 4/5(+),7/8(-)|
|Input Power Voltage||48Vdc/0.3A,|
|Jumper Cable||DC 2.1x5.5x 9.5mm, (L-300mm)|
|Dimensions||80 mm x 55 mm x 31 mm|
|Diagnostic LEDs||DC Power (Green)|
|Connectors||Shielded RJ-45, EIA 568A and 568B|
|Operating Ambient Temperature||-10 to 45 degrees|
Compliance RoHS Compliant , CE