The EPE-1212 is a small-size, wall-mountable passive PoE Injector, meaning whatever DC Power is fed into it is what it outputs as PoE power. It takes a 2.1mm DC PSU, ranging anywhere from 9v to 48v (1A), and it operates at 100Mbps FastEthernet speeds. No Power supply is included.
With its low price, small size and versatility, the EPE1212 is the perfect PoE injector for any PoE device operating outside of the 802.3af and 802.3at standards. It excels with passive PoE equipment such as external WiFi Access Points, IP cameras and VOIP telephones.
This injector uses pins 1/2 and 3/6 for data transmission and pins 4/5 and 7/8 for power. Read our PoE white paper for more information on Power-over-Ethernet technology.
|Data||PIN 1/2 & 3/6|
|Power||PIN 4/5+ & 7/8|
|Data in||Connects PC/HUB/Switch|
|Case of material||ABS 94V-0|
|Ethernet Data rate||10/100 Mbp|
|Ethernet Cable||TIA/EIA 568 Cat5|
|Ethernet Cable Connector||RJ45|
|Dimensions||H x 21mm, D x 27mm, W x 58mm (w/mounting clips, W x 74mm)|
|Package contents||1 x passive PoE Injector|