Wireless Outdoor Panel antenna kit 12dB

Discontinued Item

Outdoor Panel Antenna Kit 2.4GHz

12dB Outdoor Wireless DIY Kit with 12dBi Integrated Panel Antenna and Reverse SMA plug on RG316 cable

Stock Code	More
NET-WL-ODUDIY12

Specifications

Electrical Specification:

Frequency:

2.4 ~ 2.5 GHz

Type:

Panel Directional

Polarization:

Linear, Horizontal / Vertical

Gain:

12dBi

VSWR:

2.0:1

Beam Width:

H-plane 50°
E-plane 30°

Impedance:

50O

Connector Type:

Reverse SMA Plug (female pin)

Temperature:

-30 to 60°

Lightning Protection:

DC Ground

Radome:

Injection ABS

Dimensions:

External Dimensions 195 x 195 x 60 mm
Internal Dimensions 170 x 170 x 30 mm
(The internal connector dimensions are 26mm deep by 45mm across)

IP Rating

IP Ratings explained

Degree of Ingress Protection
First Number protection against solids		Second Number protection against liquids
0	no protection	0	no protection
1	protected against solid objects up to 50mm eg accidental touch by hands	1	protected against vertically falling drops of water
2	protected against solid objects up to 12mm eg fingers	2	protected against direct sprays of water up to 15° from the vertical
3	protected against solid objects over 2.5mm (tools and small wires)	3	protected against sprays up to 60° from the vertical
4	protected against solid objects over 1mm (tools and small wires)	4	protected against water sprayed from all directions - limited ingress permitted
5	protected against dust - limited ingress permitted (no harmful deposit)	5	protected against low pressure jets of water from all directions - limited ingress permitted
6	totally protected against dust	6	protected against strong jets of water - limited ingress permitted
		7	protected against the effects of immersion between 15cm and 1m
		8	protection against long periods of immersion under pressure