Discontinued Item


NET-WL-AMESH100	Pack contentsEthernet PortAntenna ConnectorMesh Manager





Click the image to enlarge


Solwise 2.4GHz single radio mesh with Time Division

  • Single Radio 2.4GHz
  • Layer 2 Mesh
  • Time Division Duplex (TDD) for backbone traffic
  • Bandwidth control for client connections
  • Simple windows mesh manager
  • Separate security for AP and Backbone
    WMM for AP and/or Mesh links
  • Periodic Reboot
  • Adjustable RF Power
  • Power over Ethernet (You MUST use the supplied Passive PoE power supply this unit is NOT 802.af compatible)



A high specification, single radio mesh node. Using 2.4GHz WiFi the AMESH is a super-easy to configure meshing product ideal for small to medium size sites. Perfectly scalable from two to twenty nodes so the mesh can grow as your site demands increase: Suitable for sites of up to several acres, the AMESH mesh units offer an easy end user setup solution for distributed, public broadband over WiFi. Time Division Duplex (TDD) technology for backbone links ensures the most efficient use of available bandwidth and, combined with intelligent Layer 2 routing for data traffic, means the network always works at maximum efficiency. User bandwidth management means site operators can simply restrict user connections to give fairer connection speeds. Other functions such as the 'reboot' feature, full RF power control, WMM support, and separate security for backbone traffic and AP/user connections means the AMESH is the most user friendly, easy to setup MESH solution you can buy.

Also included is the Windows based MESH Management application which allows site operators to do unit configuration and also easily assess link strengths and the mesh routes. This makes it a simple job for the operator to spot weak links and to areas of poor connectivity.

1 x 2m Ethernet cable and 1 x 25m Ethernet cable included in the package.

The antenna are not included with the package, see the accessories tab for antenna to use.

You MUST use the supplied Passive PoE power supply this unit is NOT 802.af compatible.



•2.4GHz Single Radio - For simple client connectivity

•Layer 2 Mesh - Means only one subnet over the whole network

•Time Division Duplex (TDD) for backbone traffic - Proportions Uplink vs Downlink traffic according to demand & greater flexibility with variations on data loads and type

•Bandwidth control for client connections - Limits bandwidth allocation to give ‘fairer’ use
•Simple Windows Mesh Manager - Gives a quick simple overview of link routes and qualities
•Separate security for AP and Backbone - Allows higher security for the client links
•WMM for AP and/or Mesh links - Automatic prioritisation for Multi-Media traffic
•Periodic Reboot - Gives a regular ‘clean slate’
•Adjustable RF Power - Allows you to separately set RF power for AP/client connections and mesh links – if set sensibly then reduces RF interference which improves efficiency and data throughput.
•PoE - Simple 48V Passive PoE

Chipset Atheros AR2315
Standards Compliance IEEE 802.11b/g
IEEE 802.3
IEEE 802.3u
Flash 8MByte
Radio Frequency Type DSSS/OFDM
Modulation IEEE 802.11b: CCK, DQPSK. DBPSK
IEEE 802.11g: OFDM with BPSK, QPSK, 16QAM, 64QAM
Frequency Band America/FCC: 2.412~2.462 GHz (11 channels)
Europe CE/ETSI: 2.412~2.472 (13 channels)
Transmission Power 20dBm +/- 2dBm
Transmission Rate IEEE802.11b: 1/2/5.5/11Mbps
IEEE802.11g: 6/9/12/18/24/36/48/54Mbps
Access Point Interfaces Auto sensing MDI/MDI-X Ethernet 10/100Base-TX: RJ45
Sensitivity IEEE 802.11b: -85dBm @11Mbps, PER <8%
IEEE 802.11g: -64dBm @54Mbps, PER <10%
Antenna Connector N Type Socket
Security Systems 64-bit/128-bit WEP Encryption
WiFi Protected Access (WPA), WPA-PSK (TKIP/AES), WPA-EAP
Wireless Settings Operation Mode - AP+Mesh / AP+STA /AP
Channel Selection (settings vary by Country)
Adjustable transmit power by 1dBm steps
Software/Firmware Web-based configuration via browser
Windows @Mesh Manager utility
Firmware upgrade via Web
Reset to default b Web UI
TFTP/HTTP download
Event Log
Support QoS (WMM)
Support Time settings
Operating Temperature -20°C ~ +70°C
Power DC 48 Volt + 5%; 0.4A (Max) AC adapter AC 100V ~240V
(You MUST use the supplied Passive PoE power supply this unit is NOT 802.af compatible)
CD Contents Download here 25.07.13
Quick Installation Guide Download here 15.07.11
User Manual Download here 15.07.11
Declaration of Conformity Download here 29.07.11
Solwise Video

Introduction to the Solwise AMESH100 - presented by Steve Mace

Solwise Video

Solwise Amesh Setup Video presented by Steve Mace

Solwise Video

Solwise Amesh Configuration Screens Overview presented by Steve Mace

Solwise Video

Solwise Amesh Presentation including all the setup and configuration videos