Discontinued Item

EnGenius Logo
Powered by Senao


NET-EL-EOC-3610EXT (Ultra Long Range): Outdoor Access point/Multi-Client Bridge
The EOC-3610S EXT Wireless High Power and High Gain Client Bridge/Access Point/ WDS (wireless distribution system) operates in the 2.4 GHz frequency spectrum supporting the 802.11b (2.4GHz, 11Mbps) and 802.11g (2.4GHz, 54Mbps) wireless standards. It's the best way to add wireless capability to your existing wired network, or to add bandwidth to your wireless installation.   The EOC-3610S EXT has high transmitted output power and high receivable sensitivity. High output power and high sensitivity can extend range and coverage to reduce the roaming between Access Points to get more stability for the wireless connection.   To protect your wireless connectivity the EOC-3610S EXT can encrypt all wireless transmissions through 64/128-bit WEP data encryption and also supports WPA2/WPA/802.1x for powerful security authentication. The MAC addresses filter lets you select exactly which stations should have access to your network.




Stock Code More
(Mfr part code: EOC-3610-S EXT)
Further Specifications Download Firmware
ReSMA Socket connector, with removable 5dB antenna included
Features Benefits
High Speed Data Rate Up to 54Mbps Capable of handling heavy data payloads such as MPEG video streaming
EIRP up to 33dB (with 5dBi Antenna Gain) Spreads the operation distance and reduce the roaming between APs to get more stability wireless connection
External Antenna for 2.4GHz Collocate with any antenna for user’s environment
IEEE 802.11b/g Compliant Fully Interoperable with IEEE 802.11b/IEEE802.11g compliant devices
Point-to-point, Point-to-multipoint Wireless Connectivity Let users transfer data between two buildings or multiple buildings
WPA2/WPA/ IEEE 802.1x support Powerful data security
Hide SSID (AP Mode) Avoids unallowable users sharing bandwidth, increases efficiency of the network
DHCP Client/ Server Simplifies network administration
MAC address filtering (AP Mode) Ensures secure network connection
Watertight and Weatherproof Avoid water invaded and weather corroded
Power-over-Ethernet (IEEE802.3af Compliant) Flexible Access Point locations and cost savings
Layer 2 isolation (AP mode) Improved the security of each client
Download specification datasheet
Rear View
Ethernet View
Antenna View
Pole Mount
Power Supply
Click on the images for a larger view
Data Rates 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps
Standards IEEE802.11b/g, IEEE802.3, IEEE802.3u, IEEE802.3af, IEEE802.1f, IEEE802.1x
Compatibility IEEE 802.11g/ IEEE 802.11b
Power Requirements Active Ethernet (Power over Ethernet) –48 VDC/0.375A
External Unit: Auto sensing 100/240 VAC; 50/60 Hz
Regulation Certifications FCC Part 15 B & C,
CE: EN 300328, EN 301489
EN 60950

RF Information

Frequency Band 2.400~2.484 GHz
Media Access Protocol Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA)
Modulation Technology Orthogonal Frequency Division Multiplexing (OFDM)
DBPSK @ 1Mbps
DQPSK @2Mbps
CCK @ 5.5 & 11Mbps
BPSK @ 6 and 9 Mbps
QPSK @ 12 and 18 Mbps
16-QAM @ 24 and 36 Mbps
64-QAM @ 48 and 54 Mbps
Operating Channels 11 for North America, 14 for Japan, 13 for Europe,
Receive Sensitivity (Typical) 802.11g:
-90 dBm @ 6Mbps,
-74 dBm @ 54Mbp
-95 dBm @ 1Mbps
-90 dBm @ 11Mbps
Available transmit power
• 2.4~2.462G(IEEE802.11g)
27dBm @6 ~ 24Mbps
24 dBm@48Mbps
• 2.4~2.462G(IEEE802.11b)
28dBm. @1, 2, 5.5 and 11Mbps
RF Connector SMA Socket (Female Reverse) Type


Topology Ad-Hoc, Infrastructure
Operation Mode Point-to-Point/ Point-to-Multipoint Bridge/ AP/ Client Bridge/ WDS
Interface Wireless IEEE802.11b/g
One 10/100 RJ-45 port
One console RS-232 port
Security IEEE802.1x Authenticator / RADIUS Client (EAP-MD5/TLS/TTLS) Support in AP Mode
WPA/WPA2 Supplicant support in Client Bridge Mode
WPA /WPA2/ Pre Share KEY (PSK) with TKIP/AES
MAC address filtering (AP only)
Hide SSID in beacons
VLAN Pass-through
L2 Isolation(AP mode)
Configuration Web-based configuration (HTTP)
Telnet Configuration
IP Auto-configuration DHCP client/server
Management SNMP V1, V2c, MIBI&II
Firmware Upgrade Upgrade firmware via web-browser



163.8(L)mm * 135.2(W)mm * 47.0(H)mm

Weight 1.2 Kg (2.6 lbs)


Temperature Range Operating: -0°C to 60°
Storage: -20°Cto 80°
Humidity (non-condensing) 5%~95% Typical