| Download sales leaflet |
| Download specification datasheet |
|
Hi,
Just to say thank you for providing me with an excellent solution.
I have a fast food kiosk which was recently re-located due to development work in the area. As a result we lost our BT line when we moved some 30 feet, as our new location was on the other side of the main road. BT initially stated they would install a new line free of charge, however this went from being free to a quotation for £4,500 plus VAT!
This left me in a dilemma as I wished to fit a CCTV system and be able to stream the live images over the Internet. I do have a house within 50 feet (in line of sight) of the kiosk, however there is another road to cross. There is broadband installed at this house.
The staff at Solwise recommended I use 2 Engenius 1650's. I am now able to stream the CCTV pictures seamlessly (I have also been able to stream BBC HD on my laptop) and have the option if creating a WIFI hotspot for our customers. This solution was much cheaper than that offered by other similar companies and the technical back up has been very good.
So, for just over £100 Solwise have solved my problem. Just slightly cheaper than BT's £4,500 plus VAT, oh and there is no additional line rental or call charges, which probably saves me another £350 per year (my £7/month, 200min mobile provides all the phone service we need to take orders etc).
TAKE THAT BT!
Kind Regards,
Andy
|
| Wireless |
2.4GHz It works in 2.4GHz frequency spectrum
High output power Transmit output power programmable for different country selections
High Data Rate High speed transmitting rate up to 54Mbps, support large payload such as MEPG video streaming
Multifunction application Access Point / Client Bridge / Client Router
Long range transmitting Transmit power control and distance control (ACK timeout)
Signal Strength LED indicators have the best transmit and receive signal for traffic communication |
 |
DD-WRT is available for the 1650 but please take note that no support will be given when the unit is flashed with 3rd party firmware. |
| Networking |
Public wireless solution An AP interface that is especially useful in public areas such as hotspots and enterprise
Signal Strength Display RF signal strength status shown LEDs of 3 colors, making network build‐up easier
QoS(WMM) Enhance performance and density
PPPoE Point‐to‐Point Protocol over Ethernet at Client Router mode. This function will keep trying when failed or disconnected
BSSID Basic Service Set ID, supports 4 MAC address |
| Security |
802.11i WEP, WPA, WPA2 (Encryption support TKIP/AES)
MAC address functions MAC address filter (AP mode)
802.1x IEEE802.1x Authenticator
L2 isolation
Station isolation |
| Management |
Firmware Upgrade Upgrading firmware via web browser, setting are reserved after upgrade
Reset & Backup Reset to factory default. User can export all setting into a file via WEB
MIB MIB I, MIB II(RFC1213)
SNMP V1, V2c |
| Hardware Specification |
| Physical Interface |
One 10/100 Fast Ethernet RJ‐45
Reset Button
One SMA Connector |
| LED indicators |
1 x Power/ Status
1 x LAN (10/100Mbps)
1 x WLAN (Wireless is up)
3 x Link Quality (Client Bridge mode)
• Green: Good Quality
• Yellow: Marginally Acceptable Quality
• Red: Bad Quality |
| Power Requirements |
Active Ethernet (Power over Ethernet) Proprietary PoE design
Power Adapter 24V / 0.6A DC |
| Regulation Certifications |
FCC Part 15C/15B, EN 300 328/EN 301 489‐1/‐17 |
| RF Specification |
| Frequency Band |
802.11b/g
2.412~2.472GHz |
| Modulation Technology |
OFDM = BPSK, QPSK, 16‐QAM, 64‐QAM
DSSS = DBPSK, DQPSK, CCK |
| Operating Channels |
802.11b/g
11 for North America, 14 for Japan, 13 for Europe |
| Receive Sensitivity (Typical) |
802.11g
‐92 dBm @ 6Mbps
‐74 dBm @ 54Mbp |
802.11b
‐97 dBm @ 1Mbps
‐89 dBm @ 11Mbps |
|
| Available transmit power (Average power) |
|
FCC
|
ETSI
|
| Frequency |
Power |
Frequency |
Power |
2.412~2.462 GHz
IEEE802.11g |
23dBm@6~24Mbps
23dBm@36Mbps
22dBm@48Mbps
22dBm@54Mbps |
2.412~2.472 GHz
IEEE802.11g |
20dBm@6~24Mbps
20dBm@36Mbps
20dBm@48Mbps
20dBm@54Mbps |
2.412~2.462 GHz
IEEE802.11b |
27dBm@1~11Mbps |
2.412~2.472 GHz
IEEE802.11b |
27dBm@1~11Mbps |
| Tolerance |
±1 dBm |
Tolerance |
±1 dBm |
|
| Internal Antenna |
1 x 7dBi Internal Panel Antenna |
| External Antenna |
1 x 5dBi Reverse SMA Antenna |
| Software Features |
| Topology |
Infrastructure |
| Protocol / Standard |
IEEE 802.3 (Ethernet)
IEEE 802.3u (Fast Ethernet)
IEEE 802.11b/g (2.4GHz WLAN) |
| Operation Mode |
802.11 b/g
Access Point
Client Bridge
Client Router |
| LAN |
DHCP Server
DHCP Client |
| Wireless |
Channel Selection (Setting varies by countries)
Transmission Rate
11 b/g：54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 Mbps
Long distance transmission : 1km to 30km
Transmit power table
Signal Strength indication using LEDs (3 colors)
PPPoE (CR mode) |
| Security |
WEP Encryption‐64/128/152 bit
WPA/WPA2 Personal (WPA‐PSK using TKIP or AES)
WPA/WPA2 Enterprise (WPA‐EAP using TKIP)
802.1x Authenticator
Hide SSID in beacons
MAC address filtering, up to 50 field
L2 isolation(AP mode)
Wireless STA (Client) connected list |
| QoS |
WMM |
| Configuration |
Web-based configuration (HTTP) |
| Firmware Upgrade |
• Upgrade firmware via web-browser
• Keep latest setting when f/w update |
| Administrator Setting |
• Administrator password change |
| Reset Setting |
• Reboot (Press 1 second)
• Reset to Factory Default (Press 5 seconds) |
| System monitoring |
Status, Event Log |
| SNMP |
V1, V2c |
| MIB |
MIB I, MIB II (RFC1213) |
| Backup & Restore |
Settings through Web |
| Time setting |
NTP (Auto-setting of time)
Time setting manually |
| Temperature Range |
Operating -20°C~70°C
Storage -30°C to 80°C |
| Humidity (non-condensing) |
0%～90% typical |
| Dimensions |
192mm (L) x 48mm (W) x 36.2mm (H)
|
| Weight |
250g |
Please wait while we sign you in...
