EL-ENSTATION5-AC EL-ENSTATION5-AC Package Contents Neutron Management




Click the image to enlarge

ENSTATION5-AC - EnGenius Outdoor 5 GHz 11ac Wave 2 Long-Range PtP Wireless Bridge

  • 19 dBi Antenna & 23 dBm Transmit Power Extends Networks Up to 5 Miles PtP
  • 802.11ac Wave 2 Speeds to 867 Mbps on 5 GHz
  • Optimal Bandwidth Supports Heavy Video Delivery Over Long Distances
  • IP55-Rated Housing Withstands Outdoor Harsh Environments
  • 360-Degree, 3-Axis Pivoting Arm Locks for Precise Alignment
  • Quickly initiate configuration with EnWiFi
  • *EnJet - solve transmission latency
  • EnTurbo products work in both standalone mode or managed via EnSky switches or ezMaster as part of the EnGenius EnSky Solution

Authorised Distributor


Buy Now


Mfr part code: ENSTATION5-AC


The edge 802.11ac built-in high performance CPE with MU-MIMO technology for delivering Ultra definition content to longrange distance site. EnGenius Wireless Long Customers Premise Equipment (CPE) solution is designed for deploying under the pervasive outdoor application. To meet today 's requirement on varied networking environment, EnGenius would like to provide the solution as flexible, robust and effective as the organization they desire.

The built-in turbo-engine quad-cores solution is a powerful main chipset to reinforce the calculating power and handling varied wireless traffic under a pervasive environment. The state-of-the-art 802.11ac and MU-MIMO technology brings revolutionary connecting speed and bandwidth for diversity of multimedia applications. EnStation 11AC series equip with a powerful RF interface which supports up to 867 Mbps in 5GHz frequency band to replace 11N 300Mbps solution. With robust IP55 certified casing, these access points are designed to withstand harsh environment conditions including serve and prolonged exposure to sunlight, extreme cold, frost, snow, rainfall, hail and humidity.

*EnJet โ€“ Solve transmission latency

EnJet features PtP and PtMP technology, which lets your network overcome the latency of the CSMA/CA protocol design. Access points form a well-ordered flow of transmissions based on predefined times slots. Like cars, traffic is able flow efficiently when an external coordination mechanism is present (traffic lights) and can come to a sudden halt when it is not. - Read more here

Please note EnJet devices will only work with other EnJet devices.  If you have an EnJet device (V2) and a non-EnJet (V1), you cannot bridge them if the EnJet function is enabled.

Configure with EnWiFi, a simple Wi-Fi configuration and management tool for EnGenius outdoor and indoor Wi-Fi devices. Users can configure devices on-site and monitor the installed or deployed devices on their smartphones or tablets.


Download specification datasheet (include antenna patterns)
Management Neutron Management
Access Point Type Outdoor, IP55, 5GHz 802.11ac 2x2 MU-MIMO is backwards compatible with 802.11 a/n mode
SU-MIMO Two(2) spatial stream SU-MIMO for up to 867 Mbps wireless data rate to a
single wireless client device.
MU-MIMO Two(2) spatial stream MU-MIMO for up to 867 Mbps wireless data rate to
transmit to two(2) wireless client devices simultaneously. (EnStation5-AC)
Frequency Radio 5GHz: 5150MHz~5250MHz, 5250MHz~5350MHz, 5470~5725MHz,
Support radios and channels will be varied on the configured regulatory domain.
Supported Radio Technology 802.11ac/a/g/n: Orthogonal frequency-division multiplexing (OFDM)
802.11n/ac: 2x2 MIMO with 2 streams
802.11ac supports very high throughput (VHT) โ€” VHT 20/40/80 MHz
802.11n supports high throughput (HT) โ€” HT 20/40 MHz
802.11n/ac packet aggregation: AMPDU, ASPDU
Supported Modulation Type 802.11a/n: BPSK, QPSK, 16-QAM, 64-QAM
802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
Transmit Power (Maximum Value) 5GHz: 23dBm
Maximum power is limited by regulatory domain
Maximum Power Consumption 7W
Power Source Proprietary 24V PoE (Power: 4, 5; Return: 7, 8)
Antenna Directional high gain 19dBi antenna
Frequency supported: 5150MHz to 5925MHz
Networking Interface Two (2) 10/100/1000 BASE-T RJ-45 Ethernet Ports
LED Indicators Display system and wireless transmission status
Reset Button Convert Access Point to the Factory default or the Users Default

Pole Mounting
mounting bracket to fix Access Point on a pole.

Wall Mounting
Mounting bracket to fix unit against a flat surface

Dimensions 190mm (D) x 38mm (H)
Certifications FCC, CE
Firmware for this product should only be sourced via the Solwise or EnGenius Networks Europe B.V. websites. If it is sourced elsewhere it may damage your device and invalidate the warranty. We can't provide service support to devices which are not running with ETSI firmware. EnGenius Networks Europe B.V. Downloads Site 16.10.17
EnJet: There are two models of this product, V1 and V2. Enjet is standard on V2 models and is not backwards compatible with V1 models. If you are using both models then we advise disabling EnJet on your V2 models. - -
Locator program - useful as this unit uses
DHCP to receive an IP address
Download here 17.04.19
A guide for Bridging Two ENS500-ACv2 Units Together Using WDS AP and WDS Station Operating Modes Download here 13.07.21
CE Declaration of Conformity Download here 21.07.2022
Quick Installation Guide Download here 16.10.17
User Manual Download here 16.10.17
EnGenius Podcast

Video Podcast - Episode 2

Episode 2 sees Louise & Daniel discuss the EnGenius Managed WiFi Solution

What is EnJet?

Article: What is EnJet?

click to play

Video - unboxing

click to play

Video - Set-up