^

EL-ENS500EXT-AC Package Contents Neutron Management EL-ENS500EXT-AC EL-ENS500EXT-AC

v

<<

>>

Click the image to enlarge

ENS500EXT-AC - EnGenius EnJet/EnTurbo™ 5GHz AC867 Wave2 Outdoor Long Range Wireless CPE - Discontinued Item

  • Engineered with Quad-Core CPY to boost 11AC Wave2 Performance
  • 2x2 802.11 ac wave2/a/n Access Point with multi-user MIMO (MU-MIMO)
  • Speeds up to 867 Mbps over 5GHz frequency band
  • 802.11ac Wave2 technology to enhance overall bandwidth and speed to bridge devices
  • Two(2) detachable 5.0dBi ReSMA antennas
  • Robust housing with IP55 enclosure rated for use in extreme weather
  • *EnJet - solve transmission latency
  • Choose an operating mode to meet your management and deployment requirement (AP mode/CB mode/WDS modes)
  • EnTurbo products work in both standalone mode or managed via EnSky switches or ezMaster as part of the EnGenius EnSky Solution

Authorised Distributor

»
Overview

The EnGenius ENS500EXT-AC 802.11ac with built-in high performance CPE and MU-MIMO technology for delivering Ultra definition content over long distances.

The EnGenius ENS500EXT-AC Wireless Long Customers Premise Equipment (CPE) solution is designed for deploying use in extreme weather conditions. To meet today 's requirement in varied networking environments the EnGenius ENS500EXT-AC provide a solution as flexible, robust and effective as the organisation desires.

The state-of-the-art 802.11ac and MU-MIMO technology brings revolutionary connecting speeds and bandwidth for a diverse number of multimedia applications. The ENS500EXT-AC is equipped with a powerful RF interface which supports up to 867 Mbps in 5GHz frequency band.

With a robust IP55 certified casing, this access point is designed to withstand harsh environmental conditions including prolonged exposure to sunlight, extreme cold, frost, snow, rainfall, hail and humidity.

*EnJet – Solve transmission latency

EnJet features PtP and PtMP technology, which lets your network overcome the latency of the CSMA/CA protocol design. Access points form a well-ordered flow of transmissions based on predefined times slots. Like cars, traffic is able flow efficiently when an external coordination mechanism is present (traffic lights) and can come to a sudden halt when it is not. - Read more here

Please note EnJet devices will only work with other EnJet devices.  If you have an EnJet device (V2) and a non-EnJet (V1), you cannot bridge them if the EnJet function is enabled.

 

Specification
Download specification datasheet (include antenna patterns)
Management Neutron Management
Access Point Type Outdoor, IP55, dual radios concurrent, 5GHz 802.11 ac 2x2 MIMO is backwards compatible with 802.11 a/n mode
SU-MIMO Two(2) spatial stream SU-MIMO for up to 867 Mbps wireless data rate to a single wireless client device.
MU-MIMO Two(2) spatial stream MU-MIMO for up to 867 Mbps wireless data rate to transmit to two(2) wireless client devices simultaneously.
Frequency Radio 5GHz: 5150MHz~5250MHz, 5250MHz~5350MHz, 5470~5725MHz,
5725MHz~5850MHz
Support radios and channels will be varied on the configured regulatory domain.
Supported Radio Technology 802.11ac/a/n: Orthogonal frequency-division multiplexing (OFDM)
802.11n/ac: 2x2 MIMO with 2 streams
802.11ac supports very high throughput (VHT) — VHT 20/40/80 MHz
802.11n supports high throughput (HT) — HT 20/40 MHz
802.11n/ac packet aggregation: AMPDU, ASPDU
Supported Modulation Type 802.11a/n: BPSK, QPSK, 16-QAM, 64-QAM
802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
Transmit Power (Maximum Value) 5GHz: 23dBm
Maximum power is limited by regulatory domain
Maximum Power Consumption 7.5W
Power Source Proprietary 24V PoE (Power: 4, 5; Return: 7, 8)
Antenna Two(2) detachable 5.0dBi ReSMA antennas
Frequency supported: 5150MHz to 5925MHz
Networking Interface Two (2) 10/100/1000 BASE-T RJ-45 Ethernet Ports
LED Indicators Display system and wireless transmission status
Reset Button Convert Access Point to the Factory default or the Users Default
Mounting

Pole Mounting
Assemble a mounting bracket to fix this Access Point on a pole.

Wall Mounting
Mount this Access Point on a flat wall
Dimensions 186mm (L) x 100mm (W) x 29mm (H) (7.54" x 4.49" x 1.88")
Certifications FCC, CE
Downloads
EnJet: There are two models of this product, V1 and V2. Enjet is standard on V2 models and is not backwards compatible with V1 models. If you are using both models then we advise disabling EnJet on your V2 models. - -
High Resolution Images Download here 28.11.17
Firmware for this product should only be sourced via the Solwise or EnGenius Networks Europe B.V. websites. If it is sourced elsewhere it may damage your device and invalidate the warranty. We can't provide service support to devices which are not running with ETSI firmware. EnGenius Networks Europe B.V. Downloads Site 28.11.17
Locator program - useful as this unit uses
DHCP to receive an IP address		 Download here 17.04.19
A Guide for Bridging Two ENS500-ACv2 Units Together Using WDS AP and WDS Station Operating Modes Download here 13.07.21
CE Declaration of Conformity Download here 21.07.2022
User Manual Download here 28.11.17
Reviews
Brochures
See the EnGenius case study which shows how a high-profile sports photographer uses Long range wireless access points to gain the competitive edge. Download here 16.11.17
Free Surface Elevation Tool Download here 07.11.14
 
Videos
EnGenius Podcast

Video Podcast - Episode 2

Episode 2 sees Louise & Daniel discuss the EnGenius Managed WiFi Solution


 
What is EnJet?

Article: What is EnJet?

Accessories

<

>

X