^

EL-ENS500-AC Package contents Neutron Management EL-ENS500-AC Rearview Ethernet Ports PoE Injector

v


<<

>>

Click the image to enlarge

ENS500-AC - EnGenius EnTurbo™/EnJet Outdoor 5 GHz 11ac Wave 2 PtP Wireless Bridge

  • Quad-Core CPU, 717 MHz “Turbo Engine”
  • 802.11ac 2x2 Wave 2 MU-MIMO
  • Beamforming Optimizes Antenna Signal, Reception & Reliability for Clients
  • High Transmit Power Extends Wi-Fi PtP
  • High-gain directional 14dBi Antenna
  • IP55-Rated Weatherproof & Dustproof Housing
  • EnTurbo products work in both standalone mode or managed via EWS switches or ezMaster as part of the EnGenius Wireless Network Management Solution (NMS)

Authorised Distributor

»

Buy Now

EL-ENS500-AC

Mfr part code: ENS500-AC

Overview

EnGenius Wireless Long Customers Premise Equipment (CPE) solution is designed for deploying under the pervasive outdoor application. To meet today 's requirement on varied networking environment, EnGenius would like to provide the solution as flexible, robust and effective as the organization they desire.

The built-in turbo-engine quad-cores solution is a powerful main chipset to reinforce the calculating power and handling varied wireless traffic under a pervasive environment. The state-of-the-art 802.11ac and MU-MIMO technology brings revolutionary connecting speed and bandwidth for diversity of multimedia applications. The ENS500-AC is equipped with a powerful RF interface which supports up to 867 Mbps in 5GHz frequency band to replace 11N 300Mbps solution. With robust IP55 certified casing, this access point is designed to withstand harsh environmental conditions including servere and prolonged exposure to sunlight, extreme cold, frost, snow, rainfall, hail and humidity.

Enterprise Robust Solution
The ENS500-AC is easily to install anywhere and its internal electronics have been mounted in an IP55-rated enclosure, one of the bett er waterproof and dustproof rating available, designed to withstand harsh environment conditions including serve and prolonged exposure to sunlight, extreme cold, frost, snow, rainfall, hail and humidity .

With included mounting accessories the ENS500-AC provides reliable kits to fix this device on anywhere for delivering wireless signals in the outdoor environment. To save the maintenance cost and labors fee on deploying Access Points, these products have built in two Gigabit Ethernet ports with power over Ethernet (PoE) functions for receiving power source from the included PoE adapter. With scalable extension over PoE mechanism, Access Points can receive power and signal source easily from 100 meters or 328 feet distance.

Please note EnJet devices will only work with other EnJet devices.  If you have an EnJet device and a non-EnJet, you cannot bridge them if the EnJet function is enabled.

Specification

Download EnJet Ver2 specification datasheet (shipping from late June 2019)

Download specification datasheet (include antenna patterns)

Specifications updated June 2019 to show EnJet functions.
This was a hardware change and as such there is not a firmware update to
previous models to allow EnJet functionality.
Access Point Type Outdoor, IP55, dual radios concurrent, 5GHz 802.11 ac 2x2 MIMO is back-
wards compatible with 802.11 a/n mode
SU-MIMO Two(2) spatial stream SU-MIMO for up to 867 Mbps wireless data rate to a
single wireless client device.
MU-MIMO Two(2) spatial stream MU-MIMO for up to 867 Mbps wireless data rate to
transmit to two(2) wireless client devices simultaneously.
Frequency Radio 5GHz: 5150MHz~5250MHz, 5250MHz~5350MHz, 5470~5725MHz,
5725MHz~5850MHz
Support radios and channels will be varied on the configured regulatory domain.
Supported Radio Technology 802.11ac/a/n: Orthogonal frequency-division multiplexing (OFDM)
802.11n/ac: 2x2 MIMO with 2 streams
802.11ac supports very high throughput (VHT) — VHT 20/40/80 MHz
802.11n supports high throughput (HT) — HT 20/40 MHz
802.11n/ac packet aggregation: AMPDU, ASPDU
Supported Modulation Type 802.11a/n: BPSK, QPSK, 16-QAM, 64-QAM
802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
Transmit Power (Maximum Value) 5GHz: 23dBm
Maximum power is limited by regulatory domain
Maximum Power Consumption 7.5W
Power Source Proprietary 24V PoE (Power: 4, 5; Return: 7, 8)
Antenna High-gain directional 14dBi Antenna
Frequency supported: 5150MHz to 5925MHz
Networking Interface Two (2) 10/100/1000 BASE-T RJ-45 Ethernet Ports
LED Indicators Display system and wireless transmission status
Reset Button Convert Access Point to the Factory default or the Users Default
Mounting

Pole Mounting
Assemble a mounting bracket to fix this Access Point on a pole.

Wall Mounting
Mount this Access Point on a flat wall

Dimensions 186mm (L) x 100mm (W) x 29mm (H) (7.54" x 4.49" x 1.88")
Certifications FCC, CE
Downloads
Firmware for this product should only be sourced via the Solwise or EnGenius Networks Europe B.V. websites. If it is sourced elsewhere it may damage your device and invalidate the warranty. We can't provide service support to devices which are not running with ETSI firmware. EnGenius Networks Europe B.V. Downloads Site 16.10.17
Specifications updated June 2019 to show EnJet functions.
This was a hardware change and as such there is not a firmware update to previous models to allow EnJet functionality.
- June 2019
Locator program - useful as this unit uses
DHCP to receive an IP address
Download here 17.04.19
Guide for Bridging Two ENS500-ACv2 Units Together Using
WDS AP and WDS Station Operating Modes
Download here 06.09.19
Set-up Guide - WDS AP to WDS Station bridge for EnGenius outdoor 5GHz units, (Point-to-Point and Point-to-MultiPoint bridge links) Download here 16.07.19
CE Document Download here 16.10.17
User Manual Download here 16.10.17
Reviews
Brochures
See the EnGenius case study which shows how a high-profile sports photographer uses Long range wireless access points to gain the competitive edge. Download here 16.11.17
Free Surface Elevation Tool Download here 07.11.14
 
Videos
Accessories

<

>

X