Discontinued Item

Outdoor Multi-Client Bridge 2.4GHz

High Power (20dbm) Outdoor Multi-Client Bridge-EL-2611CB5 PLUS

The Wireless Outdoor Multi-Client Bridge is a fully interoperable with all IEEE 802.11b compliant equipment, and is designed to fulfill your Outdoor Wireless Last Mile requirement. A flexible solution that operates in bridge-to-bridge mode and supports point-to-point topology, it is perfect to link building-to-building, making it ideal for installations in difficult to wire environments, SOHO, wired LAN backup and also wireless extensions to Ethernet networks. IP67 Certified. Reverse SMA antenna connector, built in 9dB Antenna. Typical bridging range of between 5 and 10Km (depending upon tranfser speed required). Includes POE system so no external power required.

2611CB5 Plus
Reverse SMA Socket



Stock Code More
Further Specifications
With built-in 9dB antenna


Features Benefits
Up to 20dBm (100mW) RF Output Power Up to 9 times coverage of regular multi-client bridge
11Mbps IEEE 802.11b Compliant Fully interoperable with IEEE 802.11b compliant devices
Extreme Temperature Range and Robust Mechanical Design Delivers reliable, top performance in the most demanding environments
Plug and Play No driver needed, easy and quick to connect your Ethernet device to Wireless
Power-over-Ethernet (PoE) Flexible Access Point locations and cost savings
DHCP Client for Dynamic IP Support Simplifies network administration
Built-in Patch Antenna on Front Panel Housing No additional antenna required saving hardware cost
Web/Telnet/SNMP Remote Configuration Management Help administrators to remotely configure or manage the Access Point/ Router using a web-browser
Package contents
Package Contents
Data Rates 1, 2, 5.5, 11 Mbps
Standards IEEE802.11b, IEEE802.3, IEEE802.3u
Compatibility IEEE 802.11b
Power Requirements AC/DC Adapter: 24V / 0.8A (via AC power outlet 100~240V).
Includes POE injector
Regulation Certifications FCC Part 15/UL, ETSI 300/328/CE
RF Information
Frequency Band 2.400 ~ 2.484 GHz
Media Access Protocol Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA)
Modulation Technology Direct Sequence Spread Spectrum (DSSS)
11 Mbps / 5.5 Mbps: CCK
2 Mbps: DQPSK
1 Mbps: DBPSK
Operating Channels 11 for North America, 14 for Japan, 13 for Europe,
2 for Spain, 4 for France
Receive Sensitivity (Typical) -94dBm @ 1Mbps
-86dBm @ 11Mbps
Available transmit power
21 +/- 2dBm @1, 2, 5.5 and 11Mbps (Depend on Different Countries' Regulation)
Topology Ad-Hoc, Infrastructure (via Outdoor AP)
Operation Mode Client, Bridge, AP
Interface One 10/100Mbps RJ-45 LAN Port
Security MAC address filtering
WEP encryption (64/128-bit)
IP Auto-configuration DHCP client
Configuration Web-based configuration (HTTP)
Telnet configuration
SNMP Agent (MIB I / II)
Firmware Upgrade Upgrade firmware via TFTP
Serial Interface (RS-232)
Dimensions (LxWxH) 163.8(L)mm * 135.2(W)mm * 47.0(H)mm
Weight 1.2 Kg (2.6 lbs)
Temperature Range Operating: -20C to 70C
(-4F to 158F)
Storage: -40Cto 80C (-40F to 176F)
Humidity (non-condensing) 5% ~ 95% Typical
Download Specifications Datasheet
Polar signal plots for the 2611CB5+ with 9dB antenna

Side Polar plot

Plan polar plot
CD Contents including User Manual Download here
Vr2.04 AP firmware Download here 02.02.06
Vr1.44 Client firmware Download here 02.02.06