IP-W45AP IP-W45AP Rearview Ethernet Port Package contents




Click the image to enlarge


IP Com 300Mbps High power Access Point

  • IEEE 802.11bgn WiFi
  • Ceiling Mount for a discreet look
  • Gigabit Ethernet Port
  • Power over Ethernet (802.3at)
  • Centralised management by Access Controller CW1000 available
  • WEP, WPA, WPA2
  • SSID to VLAN Tagging
  • Multiple operation modes
  • Centralised Management
  • 2 year return to base warranty

Golden Distributor


Buy Now



The IP-W45AP from IP Com is a Ceiling Mount Access point ideal for use in hotel and B&Bs that need to extend and expand an existing wireless network.

Although these ceiling mount access points are designed for hotels and business premises we have found many people like them for their own homes due to the neat and tidy design of the units.


Download Specification Datasheet
Hardware Features
Interfaces 1 GE LAN
Antennas 2 x 2dBi printed antennas
Button 1 x reset
Power Method

802.3at PoE/DC 12V=1A

Power supply is included.

Maximum Power Consumption 11W
Maximum Transmit Power 400mW(26dBm)
LED indicator SYS
Software Features
Compliant Standards IEEE 802.11n/g/b
Frequency Range 2.4GHz-2.483GHz
Maximum wireless speed 300Mbps
Wireless Basic Settings 4 SSID
Enable/Disable Wireless Radio
Wireless Client isolation
Wireless Access Control
Wireless Client list
SSID-to-VLAN Tagging
Adjust transmit power by dBm
Wireless Security Settings 64/128 WEP
Working mode AP, WDS,Universal Repeater
Maximum Concurrent Clients 20
Receive sensitivity b mode:1M -89dBm@8% 11M -87dBm@8% PER;
g mode:54M -74dBm@8% PER;
n mode:72.2M -72dBm@8% PER; 150M -70dBm@8% PER
LAN Settings Static IP
Dynamic IP
DHCP Server DHCP Server
Clients list
VPN Pass-Through PPTP
Management Tool SNMP(v1&v2c)
System Log
Firmware update
Time & Date Setting
Backup/Restore Configuration
Username Management
Diagnostic Tool(ping)
Package Contents Wireless N300 High Power Access Point W45AP
1 x Mounting Bracket
1 x Quick Installation Guide
1 x Ethernet Cable
4 x Screws
4 x Plastic Bolt
Power supply

Diametre: 14cm

Depth: 3cm

Operating Temperature -10℃~45℃
Storage Temperature -30℃~70℃
Operating Humidity 10%~90% non-condensing
Storage Humidity 10%~90% non-condensing
Default Settings IP Address:
Login Username:admin
Login Password:admin
Certifications FCC/CE/Rohs


High Resolution Images Download here 24.06.16
Firmware Vr. v2.0.0.4

Fixes issue with SSID not being saved.
Note units must have already been upgraded to V2 f/w. You can't load direct onto V1 units.
Download here 03.08.15

Firmware to facilitate centralised management: this is for models sold prior to 15th March 2015

Files and instructions to update the W45AP from Ver 1 firmware to Ver 2 firmware. The W45AP on Ver 1 firmware DOESN'T support any form of centralised management. When updated to Ver 2 firmware the W45AP can be used as a traditional stand-alone access point OR as part of a managed access point configuration using the CW500 Controller (but the CW500 has to be on ver 2.x f/w - contact your supplier if you need CW500 f/w) or the new CW1000.

Download here 17.03.15
Quick Information Guide Download here 28.08.14
User Guide Download here 28.08.14


IP COM Case Studies Download here 19.05.17


IP COM vs EnGenius Comparison Download here 20.11.14
IP Com PoE Access Points Comparison Guide Download here 20.11.14
Ceiling Mount Access Points Comparison Chart Download here 06.11.14
Specification Datasheet Download here 06.11.14

Videos & Articles