Discontinued Item


IP-W30APIP-W30APIP-W30APIP-W30APIP-W30APIP-W30APPackage contents





Click the image to enlarge


In wall 86 x 86mm 11bgn 300Mbps 11n Access Point

  • IEEE 802.11bgn WiFi
  • In-wall design for discreet look
  • Powered through network cable (PSU not included)
  • Power over ethernet - 802.3af standard
  • Centralised management by Access Controller CW1000 available
  • RJ45 Port for Network/Power at rear
  • RJ45 Network Port for user on front
  • Screw terminals for telephone line at rear
  • RJ11 (Pass-through) for telephone on front
  • USB for charging your Phone/Camera/MP3 player etc
  • 2 year return to base warranty

Golden Distributor




The IP-W30AP, from IP Com, is an Access Point ideal for use in hotels and B&B’s. Not only supplying wired and wireless Internet connections for guests the IP-W30AP features a USB charger port! You can use your existing USB charging cable to charge your USB powered devices such as smart phones, tables, MP3 players etc.

The IP-W30AP offers Wireless connections up to 300Mbps on the 802.11 b, g and n standards and is powered by any 802.3af compliant Power over Ethernet supply.  It has 2 RJ45 ports, one on the front allowing wired access for guests and one on the rear for network service and power provision.  It also has an RJ11 passthrough port on the front with screw terminals on the rear. The RJ11 port can be used for a telephone; you will need an adapter if using a telephone with a standard BT plug.

Although these in-the-wall access points are designed for hotels and business premises we have found many people like them for their own homes due to the neat and tidy design of the units and with the addition of the charging port this is an ideal home Access Point.

Download specification datasheet
Hardware Features
Dimensions Height(86mm) x Width(86mm) x Depth(35mm)
Weight 104.6g(173.6g include the package)
AP Type Fat AP
Interfaces 2*FE LAN ports
1*RJ11 Telephone port
1*USBv2.0(iPad not recommended)
Antennas 2*3dbi omni-directional antennas
Button 1*Reset
Power Method 802.3af PoE
Maximum Power Consumption 9W
LED indicator WiFi
Software Features
Compliant Standards IEEE 802.11n/g/b
Frequency Range 2.4GHz-2.483GHz
Maximum wireless speed 300Mbps
Maximum Transmit Power 18dbm
Wireless Basic Settings Multiple SSID
Enable/Disable Wireless Radio
Wireless Client isolation
Wireless Access Control
Wireless Client list
SSID-to-VLAN Tagging
Wireless Security Settings 64/128 WEP
Working mode AP
Maximum Concurrent Clients 12
Receiver sensitivity b mode:1M -92dBm@8% 11M -87dBm@8% PER;
g mode:54M -72dBm@8% PER;
n mode:72.2M -68dBm@8% PER; 150M -68dBm@8% PER
Modulation OFDM : BPSK@6/9Mbps、QPSK@12/18Mbps、16-QAM@24Mbps、64-QAM@48/54Mbps
DSSS : DBPSK@1Mbps、DQPSK@2Mbps、CCK@5.5/11Mbps
LAN Settings Static IP
Dynamic IP
DHCP Server DHCP Server
Clients list
VPN Pass-Through PPTP
Management Tool SNMP(v1&v2c)
System Log
Firmware update
Time&Date Setting
Backup/Restore Configuration
Username Managerment
Diagnostic Tool(ping)
Package Contents 300M Wall Jack Fat Access Point W30AP
Two Screws
Operating Temperature -10℃~45℃
Storage Temperature -30℃~70℃
Operating Humidity 10%~90% non-condensing
Storage Humidity 10%~90% non-condensing
Default Settings IP Address:
Login Username:admin
Login Password:admin
Certifications FCC/CE/Rohs
CE Certificate Download here 17.10.16
High Resolution Images Download here 24.06.16
Firmware Ver
Needed for:
CW500(V2.1.6.1(4147) or later)
CW1000(V2.0.6.3(4146) or later)
Download here 10.06.16
Firmware Ver
Solves the problem creating SSID's
(If you are on Ver1 firmware you will need to upgrade to Ver 2 firmware, below, before upgrading to this version).
Download here 20.05.15

Firmware to facilitate centralised management: this is for models sold prior to 15th March 2015

Files and instructions to update the W30AP from Ver 1 firmware to Ver 2 firmware. The W30AP on Ver 1 firmware DOESN'T support any form of centralised management. When updated to Ver 2 firmware the W30AP can be used as a traditional stand-alone access point OR as part of a managed access point configuration using the CW500 Controller (but the CW500 has to be on ver 2.x f/w - contact your supplier if you need CW500 f/w) or the new CW1000.

Download here 12.03.15
Firmware which allows RF power control Download here 19.11.14
Deployment Guide Download here 30.06.14
Quick Information Guide Download here 30.06.14
User Guide Download here 30.06.14
IP COM Case Studies Download here 19.05.17