Discontinued Item

EnGenius Logo
Powered by Senao

NET-EL-NCB-3220 - 20-26dbm Wireless Indoor Multi-Client Bridge/AP/ WDS
The NCB-322- is a Wireless Multi-Client Bridge / Access Point / WDS (wireless distribution system) which operates seamlessly in the 2.4 GHz frequency spectrum supporting the 802.11b (2.4GHz, 11Mbps) and 802.11g (2.4GHz, 54Mbps) wireless standards. It has user setable power levels allowing up to 400mW power output (though the user should ensure they stay within the net EIRP limits).

To protect your wireless connectivity, it can encrypt all wireless transmissions through 64/128-bit WEP data encryption and also supports WPA. The MAC address filter lets you select exactly which stations should have access to your network. With the Wireless Multi-Client Bridge/Access Point/WDS, you'll experience the best wireless connectivity available today. The antenna connector is a Reverse-TNC socket (we sell an adapter to take this to ReSMA Socket if required).


Click on image for a larger view
Stock Code   More...
(Mfr part code: NCB-3220)
Download Manual Download Firmware
Download Firmware Further Specifications
Need to convert this product to Euro - click here
7+1 Multifunction Access Point
Click on image to see a larger view
Functions available on indoor and outdoor units
Features Benefits
High Speed Data Rate Up to 54Mbps Capable of handling heavy data payloads such as MPEG video streaming
IEEE 802.11/b/g Compliant Fully Interoperable with IEEE 802.11b/IEEE802.11g compliant devices
Point-to-point, Point-to-multipoint Wireless Connectivity Let users transfer data between two buildings or multiple buildings
Plug and Play No driver needed, easy and quick to connect your Ethernet device to Wireless
WPA (Wi-Fi Protected Access) Powerful data security
Hide SSID (AP Mode) Avoids unallowable users sharing bandwidth, increases efficiency of the network
DHCP Client/ Server Simplifies network administration
WDS (Wireless Distributed System) Make wireless AP and Bridge mode simultaneously as a wireless repeater
MAC address filtering (AP Mode) Ensures secure network connection
Power-over-Ethernet (IEEE802.3af) Flexible Access Point locations and cost savings
Output Power Controllable Adapts for external antennas to be any certification
NCB-3220 NCB-3220 NCB-3220
Rear View
Antenna Connector - ReTNC Socket
Click on images for a larger view
General Specifications
Data Rates 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps
Standards IEEE802.11b/g, IEEE802.1x, IEEE802.3, IEEE802.3u
Compatibility IEEE 802.11g/ IEEE 802.11b
Power Requirements Power Supply: 90 to 240 VAC +/- 10 (depends on different countries)
Device: 12 V/ 1A DC or PoE 48V/250mA
Status LEDs LAN: Link, WLAN: Link, Power: on/off
Regulation Certifications FCC Part 15/UL, ETSI 300/328/CE
RF Information
Frequency Band 2.400/2.484 GHz
Media Access Protocol Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA)
Modulation Technology Orthogonal Frequency Division Multiplexing (OFDM)
DBPSK @ 1Mbps
DQPSK @2Mbps
CCK @ 5.5 & 11Mbps
BPSK @ 6 and 9 Mbps
QPSK @ 12 and 18 Mbps
16-QAM @ 24 and 36 Mbps
64-QAM @ 48 and 54 Mbps
Operating Channels 11 for North America, 14 for Japan, 13 for Europe,
Receive Sensitivity (Typical) -94dBm @ 1Mbps, -92dBm @ 2Mbps,
-89dBm @ 5.5Mbps, -86dBm @ 11Mbps,
-92dBm @ 6Mbps, -90dBm @ 9Mbps
-88dBm @ 12Mbps, -86dBm @ 18Mbps,
-83dBm @ 24Mbps, -79dBm @ 36Mbps,
-74dBm @ 48Mbps, -72dBm @ 54Mbps
Available transmit power

20-26 +/- 2dBm
11b mode, RF power set on 20dBm.
11g mode, RF power from 20dBm up to 26dBm.
Default mode: 11b/g RF power set on 20dBm.

RF Connector TNC Type (Female Reverse)
Topology Ad-Hoc, Infrastructure
Operation Mode Point-to-Point/ Point-to-Multipoint Bridge/ AP/ Client Bridge/ WDS
Interface One 10/100Mbps RJ-45 LAN Port
Security IEEE802.1x Authenticator / RADIUS Client (EAP-MD5/TLS/TTLS) Support in AP Mode
WPA2/ WPA/ Pre-share Key (PSK)/ AES/ TKIP
MAC address filtering
Hide SSID in beacons
IP Auto-configuration DHCP client/server
Configuration Web-based configuration (HTTP)
Telnet configuration
Firmware Upgrade Upgrade firmware via web-browser
Temperature Range Operating: -10C to 60C (14F to 140F)
Storage: -40Cto 70C (-40F to 158F)
Humidity (non-condensing) 5%~95% Typical
Dimensions 13.5cm x 11cm x 3cm
Firmware ver 1.43.05, includes release notes Click here for details and instructions
You will need the serial number and model number from the label on the unit
Firmware ver 1.43.03, includes release notes 03.09.08
MIB file required for SNMP Download here 17.06.08
Firmware version 1.41.05

New Features added:
Add the IAPP function AP mode.
Add the PPPoE function in CR mode.
Add WISP Client Mode (client with router)

To change the PPPoE MTU size form 1450 to 1492.
Solved the firmware will keep the state when flash reload to default.
Disable the URM in Adhoc Mode.

Note this f/w and these new operating modes apply to the indoor and the outdoor
Click here for details and instructions
You will need the serial number and model number from the label on the unit
Firmware version 1.40 Adds VLAN support 21.05.07
Firmware version 1.39: Adds transparent bridge mode 18.04.07
Firmware version 1.38: Improves on WDS & WPA  
Datasheet Download here 14.02.08
User Manual Download here