Discontinued Item
Powered by Senao
NET-EL-ECB-3610S (Ultra Long Range) : Indoor Access Point / Multi-Client Bridge / WDS
The ECB-3610S Wireless High Power and High Gain Client Bridge/Access Point/ WDS (wireless distribution system) operates in the 2.4 GHz frequency spectrum supporting the 802.11b (2.4GHz, 11Mbps) and
![]() |
|
Features | Benefits |
High Speed Data Rate Up to 54Mbps | Capable of handling heavy data payloads such as MPEG video streaming |
High Output Power up to 28dBm | Excellent output power spreads the operation distance |
IEEE 802.11b/g Compliant | Fully Interoperable with IEEE 802.11b/IEEE802.11g compliant devices |
Point-to-point, Point-to-multipoint Wireless Connectivity | Let users transfer data between two buildings or multiple buildings |
WPA/WPA2/ IEEE 802.1x support | Powerful data security |
Hide SSID (AP Mode) | Avoids unallowable users sharing bandwidth, increases efficiency of the network |
DHCP Client/ Server | Simplifies network administration |
WDS (Wireless Distributed System) | Make wireless AP and Bridge mode simultaneously as a wireless repeater |
MAC address filtering (AP Mode) | Ensures secure network connection |
Power-over-Ethernet (IEEE802.3af) | Flexible Access Point locations and cost savings |
Layer 2 isolation (AP mode) | Improved the security of each client |
Download specification datasheet | |
![]() Click on image to see a larger view |
|
Data Rates | 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps |
Standards | IEEE802.11b/g, IEEE802.3, IEEE802.3u, IEEE802.3af, IEEE802.1f, IEEE802.1x |
Compatibility | IEEE 802.11g/ IEEE 802.11b |
Power Requirements | Power Supply: 90 to 240 VAC +/- 10 (depends on different countries) Device: 12 V/ 1A DC or PoE 48V/250mA |
Status LEDs | LAN: Link, WLAN: Link, Power: on/off |
Regulation Certifications | FCC Part 15 B & C, CE: EN 300328, EN 301489 EN 60950 |
RF Information
|
|
Frequency Band | 2.400/2.484 GHz |
Media Access Protocol | Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA) |
Modulation Technology | Orthogonal Frequency Division Multiplexing (OFDM) DBPSK @ 1Mbps DQPSK @2Mbps CCK @ 5.5 & 11Mbps BPSK @ 6 and 9 Mbps QPSK @ 12 and 18 Mbps 16-QAM @ 24 and 36 Mbps 64-QAM @ 48 and 54 Mbps |
Operating Channels | 11 for North America, 14 for Japan, 13 for Europe, |
Receive Sensitivity (Typical) | 802.11g: -90 dBm @ 6Mbps, -74 dBm @ 54Mbp 802.11b: -95 dBm @ 1Mbps -90 dBm @ 11Mbps |
Available transmit power (Typical) |
• 2.4~2.462G(IEEE802.11g) |
RF Connector | TNC Type (Female Reverse) |
Networking
|
|
Topology | Ad-Hoc, Infrastructure |
Operation Mode | Point-to-Point/ Point-to-Multipoint Bridge/ AP/ Client Bridge/ WDS |
Interface | One 10/100Mbps RJ-45 LAN Port |
Security | IEEE802.1x Authenticator / RADIUS Client (EAP-MD5/TLS/TTLS) Support in AP Mode IEEE802.1x Supplicant (EAP-MD5/TLS/TTLS, PEAP) support in Client Bridge Mode WPA /WPA2/ Pre Share KEY (PSK) with TKIP/AES MAC address filtering (AP only) Hide SSID in beacons VLAN Pass-through L2 Isolation |
IP Auto-configuration | DHCP client/server |
Management
|
|
Configuration | Web-based configuration (HTTP) Telnet Configuration SNMP V1, V2c, MIBI&II |
Firmware Upgrade | Upgrade firmware via web-browser |
Environmental
|
|
Temperature Range | Operating: 0°C to 45°C (32°F to 113°F) Storage: -20°Cto 70°C (-4°F to 158°F) |
Humidity (non-condensing) | 5%~95% Typical |