| Features |
Benefits |
| Super G solution up to 108Mbps |
Capable of handling heavy data payloads such as MPEG, video streaming, large file transfer and VoIP |
| Total EIRP up to 2000mW |
Extended excellent Range and Coverage (fewer APs) |
| IEEE 802.11b/g Compliant |
Fully Interoperable with IEEE 802.11b/IEEE802.11g compliant devices |
| 7+1 Multi Functions |
Access Point/Client Bridge/Repeater/WDS AP/ WDS Bridge/Client Router/AP Router |
| Point-to-multipoint Wireless connectivity |
Let users transfer data between two buildings or multiple buildings |
| WDS (Wireless Distributed System) |
Make wireless AP and Bridge mode simultaneously as a wireless repeater |
| Universal Repeater |
The easiest way to expand your wireless networking coverage |
| Support Multi-SSID function (4 SSID) in AP mode (BSSID) |
Allow clients to access different networks through a single access point and assign different policies and functions for each SSID by manager |
| Antenna diversity support |
Enhance the traffic signal |
| Bandwidth selection |
Using different bandwidth to reach varied distance |
| WPA2/WPA/ IEEE 802.1x support |
Powerful data security |
| 802.1x Supplicant support (CB mode) |
More sensitive data security in Client Bridge mode |
| MAC address filtering in AP mode(up to 50) |
Ensure the security of network connections |
| User isolation support (AP mode) |
Protect the private network between client users. |
| PPPoE function support (CR mode) |
Easy to access internet via ISP service authentication |
| Power-over-Ethernet (IEEE802.3af) |
Power supply via Ethernet cable which makes the setup more flexible avoids restricting from wiring lines. |
 |
DD-WRT is available for the 3500 but please take note that no support will be given when the unit is flashed with 3rd party firmware. |
| |
|
General Specifications
|
| Download specification datasheet |
| Download powerpoint slide show showing 7 operational modes of the ECB-3500 |
| Physical Interface |
LAN: One 10/100 Fast Ethernet RJ-45
Reset Button
Power Jack |
| LEDs Status |
Power/ Status
LAN (10/100Mbps)
WLAN (Wireless Connection) |
| Power Requirements |
Power Supply: 90 to 240 VDC ± 10%, 50/60 Hz (depends on different countries)
Active Ethernet (Power over Ethernet, IEEE802.3af)- 48 VDC/0.375A
Device: 12V/1A |
| Regulation Certifications |
FCC Part 15, CE |
| Frequency Band |
2.400~2.484 GHz |
| Media Access Protocol |
Carrier sense multiple access with collision avoidance (CSMA/CA) |
| Modulation Technology |
OFDM: BPSK, QPSK, 16-QAM, 64-QAM
DBPSK, DQPSK, CCK |
| Operating Channels |
11 for North America, 14 for Japan, 13 for Europe |
| Receive Sensitivity (Typical) |
IEEE802.11g
6Mbps@ -92dBm
54Mbps@ -74dBm
IEEE802.11b
1Mbps@ -97dBm
11Mbps@ -89dBm |
| Available transmit power |
IEEE802.11g
26dBm@6~24 Mbps
25dBm@36 Mbps
23dBm@48 Mbps
22dBm@54Mbps
IEEE802.11b
27dBm@1 ~ 11Mbps |
| Antenna x 2 |
Detachable omni antenna
Reverse TNC Connector; Peak Gain = 5dBi |
| Topology |
Infrastructure/Ad-Hoc |
| Operation Mode |
Access Point/Client Bridge/Repeater/WDS AP/ WDS Bridge/Client Router/AP Router |
| LAN |
DHCP Server
DHCP Client |
WAN
(Client Router /AP Router mode) |
PPPoE |
| Router |
NAT/ NAPT |
| VPN |
VPN pass-through (PPTP, L2TP, IPSEC) |
| Wireless |
• Wireless Mode – 11b / 11g / Disable
• Channel Selection (Setting varies by Country)
• Transmission Rate - 11 b/g: 108, 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 in Mbps
• Transmit output power control
• Signal Strength |
| Security |
• WEP Encryption-64/128/152 bit
• WPA Personal (WPA-PSK using TKIP or AES)
• WPA Enterprise (WPA-EAP using TKIP)
• 802.1x Authenticator (AP mode)
• 802.1x Supplicant- TTLS (CB mode)
• Hide SSID in beacons
• Multiple SSID with 802.1q VLAN tagging (up to 4 SSIDs)(AP mode)
• MAC Filter(AP mode)
• L2 isolation(AP mode)
• Wireless STA (Client) connected list
• Lock to AP MAC (CB mode) |
| QoS |
WMM |
| Configuration |
Web-based configuration (HTTP)/Telnet |
| Firmware Upgrade |
• Upgrade firmware via web-browser
• Keep latest setting when f/w update |
| Administrator Setting |
• Administrator password change |
| Reset Setting |
• Reboot (press 1 second)
• Reset to Factory Default (press 5 seconds) |
| System monitoring |
Status, Statistics and Event Log |
| SNMP |
V1, V2c |
| MIB |
MIB I, MIB II |
| Backup & Restore |
Settings through Web |
| Temperature Range |
• Operating: 0°C to 45°C (32°F to 113°F)
• Storage: -20°C to 70°C (-4°F to 158°F) |
| Humidity (non-condensing) |
5%~95% typical |
| Dimensions |
125mm (L) x 108mm (W) x 31mm (H) |
| Weight |
350g |