^

EL-EAP1300 Neutron Management EL-EAP1300 EL-EAP1300 EL-EAP1300 Package Contents MU-MIMO & Beamforming High Performance by MU-MIMO & Beamforming

v


<<

>>

Click the image to enlarge

EL-EAP1300

EnGenius EnTurbo AC1300 Wave 2 Indoor Wireless AP

  • Quad-Core Processor, 717 MHz “Turbo Engine”
  • 11ac Wave 2 Wireless Speeds to 867 Mbps (5 GHz); to 400 Mbps (2.4 GHz)
  • Up to 30% Faster Throughput Over 11ac Wave 1 3x3 APs
  • 802.3af PoE Compliant
  • 360° omni-directional antennas
  • Multiple operation modes
  • Works both in standalone mode or managed via EWS switches or ezMaster as part of the EnGenius Wireless Neutron Management Solution

 

Authorised Distributor

»

Buy Now

EL-EAP1300

(Mfr part code: EAP1300)

Overview

The EAP1300 from EnGenius is a high-performance Access Point with MU-MIMO technology for high-density use on multiple applications. This Wireless Management Access Point solution is designed for deployment in an indoor environment. The state-of-the-art 802.11ac and MU-MIMO technology brings revolutionary connection speeds and bandwidth for a number of multi-media applications. The EAP1300 and EAP1300EXT are both equipped with two powerful RF interfaces that support up to 867 Mbps in the 5GHz frequency band and 400 Mbps in the 2.4GHz frequency band (with 4ss/VHT40 clients).

Carry multi-media content over MU -MIMO Transmit Beam-forming technology.
The EAP1300 and EAP1300EXT not only have built in powerful RF interfaces but also feature advanced Multi-Users Multiple input Multiple output (MU -MIMO) and Transmit beamforming (TxBF) technologies.

The significant improvement on 802.11ac wave 2.0 is MU -MIMO technology, which enhances a dramatic break-through in the performance and flexibility of the transmission to wireless client devices. MU -MIMO allows multiple spatial streams to be allocated to different clients simultaneously thereby increasing total throughput, reducing latency, improving capacity of the WLAN system and increasing spectral efficiency.

Beamforming is standard in 802.11ac wave 2.0 which allows Access Points to focus energy of multiple antennas to transmit to a particular client device.  The innovative technology significantly enhances the higher signal-to-noise ratio and greater throughput of that client.

With MU-MIMO and Beamforming technology the EAP AC1300 advanced Indoor Access Points could bring more traffic to wireless client devices simultaneously over a longer distance and save time for serving other wireless client devices.

RF Management to Achieve Optimal Wireless Performance
EnGenius intelligent RF detecting mechanism —Background Scanning, continues to monitor RF movement of your environment and initialising the control of Transmit Power and channel assignment assures even RF coverage along with consistent wireless performance. To assist client devices to get the optimal performance under a pervasive environment, Band Steering automatically steers dual-band capable client devices to the appropriate channel to maintain a balanced number of clients per Access Point. Configuring multiple Access Points to serve your own devices (BYOD) in enterprise class wireless LAN environments can enable Fast Roaming to reduce roaming delay time and to secure seamless connection on VOIP services when mobile devices move between Access Points.

Specification
Download specification datasheet (include antenna patterns)
Management Neutron Management
Access Point Type Indoor, dual radios concurrent, 5GHz 802.11 ac 2x2 MIMO is back-
wards compatible with 802.11 a/n mode, 2.4GHz 802.11 n 2x2 MIMO is
backwards compatible with 802.11 b/g.
SU-MIMO Two(1) spatial stream SU-MIMO for up to 1,267 Mbps wireless data rate to
a single wireless client device.
MU-MIMO Two(1) spatial stream MU-MIMO for up to 867 Mbps wireless data rate to
transmit to two(2) MU-MIMO capable wireless client devices simultaneously.
Frequency Radio 2.4GHz: 2400MHz ~ 2835MHz,

5GHz: 5150MHz~5250MHz, 5250MHz~5350MHz, 5470~5725MHz,
5725MHz~5850MHz

Support radios and channels will be varied on the configured regulatory domain.
Supported Radio Technology 802.11b: Direct-sequence spread-spectrum (DSSS)
802.11ac/a/g/n: Orthogonal frequency-division multiplexing (OFDM)
802.11n/ac: 2x2 MIMO with 4 streams
802.11ac supports very high throughput (VHT) — VHT 20/40/80 MHz
802.11n supports high throughput (HT) — HT 20/40 MHz
802.11n supports very high throughput under the 2.4GHz radio –VHT40
MHz (256-QAM)
802.11n/ac packet aggregation: A-MPDU, A-SPDU
Supported Modulation Type 802.11b: BPSK, QPSK, CCK
802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
Transmit Power (Maximum Value) 2.4GHz: 21dBm
5GHz: 21dBm
Maximum power is limited by regulatory domain
Maximum Power Consumption 10W
Power Source

Direct DC Input: 12V/1A
Power Over Ethernet: 802.3af Input

Antenna (Integrated Antenna)
2.4GHz: 5 .0 dBi
5GHz: 5.0 dBi
Networking Interface One (1) 10/100/1000 BASE-T RJ-45 Ethernet Ports
DC Powering Interface One (1) DC Jack interface
LED Indicators Display system and wireless transmission status
Reset Button Convert Access Point to the Factory default or the Users Default
Mounting

Ceiling Mounting
Assemble a mounting bracket for drop ceiling

 

Wall Mounting
Mount Access Point on a flat wall

Dimensions Diameter : 6.36" (161.54 mm)
Height : 1.64" (41.66 mm)
Weight 336g
Certifications FCC, CE
Downloads
Firmware for this product should only be sourced via the Solwise or EnGenius Networks Europe B.V. websites. If it is sourced elsewhere it may damage your device and invalidate the warranty. We can't provide service support to devices which are not running with ETSI firmware. EnGenius Networks Europe B.V. Downloads Site 16.10.17
User Manual Download here 16.10.17
CE Document Download here 16.10.17
Reviews
Brochures
Videos
click to play

Video - unboxing

click to play

Video - Set-up

What is 11ac?

What is 11ac?

Accessories

<

>

X