Discontinued Item

Senao Logo
EnGenius range from Senao
EL-3054CB3+ Multi-Client Bridge/Access Point/ Repeater
54 Mbps 19dBm with built in Power over Ethernet (requires PoE injector)
Antenna connector is Reverse TNC Socket Type - We stock an adapter to go to the more common ReSMA Socket if required

Stock Code More...
Download drivers
Download manual
Further Specifications


Features Benefits
High Speed Data Rate Up to 54Mbps Capable of handling heavy data payloads such as MPEG video streaming.
IEEE 802.11b/g Compliant Fully Interoperable with IEEE
802.11b/IEEE802.11g Compliant
Point-to-point, Point-to-multipoint Wireless
Let users transfer data between two buildings or multiple building.
Plug and Play No driver needed, easy and quick to connect your Ethernet device to Wireless
Power-over-Ethernet Flexible Access Point locations and cost savings.
WPA (TKIP/Pre-shared key) support Powerful Data Security
Hide SSID (AP Mode) Avoids unallowable users sharing bandwidth, increases efficiency of the network
DHCP Client/Server Simplifies Network Administration
WDS (Wireless Distribution System) Make wireless AP and Bridge mode simultaneously as a wireless repeater
MAC address filtering (AP Mode) Ensures secure network connections
Seamless Roaming Allows users to travel between APs without losing their network connection
Data Rates 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps
Standards IEEE802.11b/g, IEEE802.1x, IEEE802.3, IEEE802.3u
Compatability IEEE 802.11g/ IEEE 802.11b compliant
Power Requirements Power Supply: 90 to 240 VDC +/-10%(depends on different countries)
Device: 12 V/ 1A
Replacement Power Suppy code - PSU040
(PSU048 will also work)
Status LEDs LAN:Link, WLAN:Link, Power: on/off
Regulation Certification FCC Part 15/UL, ETSI 300/328/CE
Frequency Band 2.400∼2.484 GHz
Media Access Protocol Carrier sense multiple access with collision avoidance (CSMA/CA)
Modulation Technology Orthogonal Frequency Division Multiplexing (OFDM)
DBPSK @ 1Mbps
DQPSK @2Mbps
CCK @ 5.5 & 11Mbps
BPSK @ 6 and 9 Mbps
QPSK @ 12 and 18 Mbps
16-QAM @ 24 and 36 Mbps
64-QAM @ 48 and 54 Mbps
Operating Channels 13 for Europe
Receive Sensitivity (Typical) -94dBm @ 1Mbps -92dBm @ 6Mbps -83dBm @ 24Mbps
-92dBm @ 2Mbps -90dBm @ 9Mbps -79dBm @ 36Mbps
-89dBm @ 5.5Mbps -88dBm @ 12Mbps -74dBm @ 48Mbps
-86dBm @ 11Mbps -86dBm @ 18Mbps -72dBm @ 54Mbps
Available transmit power 21 +/- 2dBm @1, 2, 5.5 and 11Mbps
20 +/- 2dBm @6, 9, 12, 18Mbps
17 +/- 2dBm @24, 36Mbps
16 +/- 2dBm @48, 54Mbps
RF Connector

Reverse TNC Socket Type
We stock an adapter to go to the more common ReSMA Socket if required

Network Information
Topology Ad-Hoc, Infrastructure
Operation Mode Point-to-Point/ Point-to-Multipoint Bridge/ AP/ Client Bridge/ Repeater
Interface One 10/100Mbps RJ-45 LAN Port
Security IEEE802.1x / RADIUS Client (EAP-MD5/TLS/TTLS) Support
WPA* -- Wi-Fi Protected Access
-PSK (Pre share key) with 64/ 128-bit WEP Key
-EAP-MD5/TLS/ TTLS authenticator support
MAC address filtering (WLAN)
Hide SSID in beacons
IP Auto-configuration DHCP Client/Server
Configuration Web-based configuration (HTTP)
Firmware Upgrade Upgrade firmware via Web-Browser
Dimensions (HxWxD) 125(L)mm * 108(W)mm * 31(H)mm
4.9 (L)in* 4.3(W)in * 1.2(H)in
Weight 350 g (0.8 lb.)
Temperature Range 10C to 45C (14F to 113F) - Operating
-40Cto 70C (-40F to 158F) - Storage
Humidity (non-condensing) 5%~95% Typical
Firmware, V. 2.4.8 for web upgrade only + Firmware Upgrade Guide Download here