Discontinued Item

Senao EL-2611CB3+ Wireless Multi-Client Bridge/ Access Point
- 11Mbps
- Easy and Quick Connect your Ethernet Device to Wireless
- Hide SSID to secure your Network (AP Mode)
- No Driver needed (Plug and Play)
- Flexible Access Point locations and cost savings ( Power-over-Ethernet -requires poe injector )
- Antenna connector is TNC Female-Reverse (we sell an adapter to take this to ReSMA Socket if required)

Senao logo
EnGenius range from Senao

Wireless AP client Bridge EL-2611CB3+


Stock Code More...
Download firmware
Download manual
Further Specifications
Features Benefits
11Mbps IEEE 802.11b Compliant Fully Interoperable with IEEE 802.11b Compliant
Point-to-point, Point-to-multipoint Wireless Connectivity Let users transfer data between two buildings or multiple buildings
Plug and Play No driver needed, easy and quick to connect your Ethernet device to Wireless
Power-over-Ethernet Flexible Access Point locations and cost savings
64 /128-bit WEP data encryption Powerful data security
Hide SSID (AP Mode) Avoids unallowable users sharing bandwidth, increases efficiency of the network
DHCP Client Simplifies network administration
Web-based configuration Helps administrators to remotely configure or manage the Multi-Client Bridge with web browser
MAC address filtering (AP Mode) Ensures secure network connection
Seamless Roaming Allows users to travel between APs without losing their network connection
Data Transfer Rate 11, 5.5, 2 and 1 Mbps, Auto Fall-Back
Frequency Band 2.400~2.484 GHz
Sensitivity @FER=0.08 -86dbm @11 Mbps
-88dbm @5.5 Mbps
-90dbm @2 Mbps
-92dbm @1 Mbps
Range (open environment) 11 Mbps -300m
5.5 Mbps -400m
2 Mbps -500m
1 Mbps -800m
Radio type Direct Sequence Spread Spectrum (DSSS)
Operation Channels 13 for Europe
Modulation 11 Mbps / 5.5 Mbps CCK
2 Mbps: DQPSK
1 Mbps: DBPSK
RF Connector TNC Female-Reverse
(we sell an adapter to take this to ReSMA Socket if required)
RF Output Power 20dBm(100mW)-CE
WEP data encryption 64/128-bit
Compatibility IEEE 802.11b compliant
Regulation Certifications FCC Part 15/UL, ETSI 300/328/CE
Power Supply 12V DC/ 1A
Replacement Power Suppy code - PSU040
(PSU048 will also work)
Topology Point-to-Point/ Point-to-Multipoint/ Infrastructure
Interface One 10Base-T RJ-45 LAN Port
Firmware Upgrade Upgrade firmware via TFTP
Security MAC address filtering (AP Mode)
WEP encryption (64/128 bit)
Hide SSID in beacons, stations can not use "any" SSID (AP Mode)
IP Auto-configuration DHCP client
Management Web-based configuration
Temperature Range 0 to 55C (32F to 131F)- Operating
-20C to 80C(-4F to 176F)- Storage
Humidity (non-condensing) 5%~95% typical
Physical Specifications
Dimensions 125(L)mm * 108(W)mm * 31(H)mm
4.9 (L)in* 4.3(W)in * 1.2(H)in
Weight 350 g (0.8 lb.)
Firmware - Vr2.2.0
Fixes compatibility problems found with some Centrino chipsets.
Download here 27.03.07
Firmware Vr.1.8.0
Note: Upgrade only if original firmware is V.1.7.0 or above
Download here