Discontinued Item

Pheenet Logo

11n Draft 2.0 Wireless Access Point NET-WLN-501
2.4 GHz, 802.11 b/g/n, 300 Mbps

The Pheenet WLN-501 complies with 802.11n draft 2.0, the next generation wireless standard. With the advanced MiMo technology, it can support the data transmission rate of up to 6 times more (up to 300Mbps) and the coverage 3 times more than IEEE 802.11b/g devices. The WLN-501's stable wireless connection and high bandwidth enable you to enjoy the network applications without any interruption. The WLN-501 has a WPS button. The WPS function provides easy procedures to set up wireless security. Just press the WPS button and you can simplify the security setting.

The WLn-501 is a high cost-efficiency AP for Small office / Home office users, all computers and network devices can share a single xDSL / cable modem internet connection at high speed.
WLN-501
Stock Code More...
NET-WLN-501
(Mfr part code: WLn-501(EU))
Further Specifications Further Specifications Need to convert this product to Euro - click here
 
Specifications
Down View
Pack Shot
WLN-501
Packshot
Front View
Rear View
Front View
Rear View
 
Click on images to see a larger view
WLN-501
Features

1. Complies with the IEEE 802.11b/g/Draft-N specification
2. Supports 2.400~2.4835GHz frequency band
3. High data rate up to 300Mbps network speed
4. Auto rate fallback in case of obstacles or interferences
5. Supports point-to-point and point-to-multi point bridge function
6. Supports WMM function to meet the Multimedia data bandwidth requirement
7. Supports MiMo Technology, enhancing the throughput and
8. Coverage range significantly
9. WPS (Wi-Fi Protected Setup) easy to use setup for the security
10. Supports WDS (Wireless Distributed System) repeater mode
11. Supports roaming link integrity
12. Supports authentication for wireless connectivity based on ESSID
13. Provides 64/128 bit key length WEP data encryption
14. Supports WPA, WPA2 security enhanced function (pre-shared key,
15. 802.1x, TKIP, AES …)
16. Provides MAC access control
17. Provides hidden SSID function
18. Provides DHCP server
19. Supports Web-based configuration
20. Firmware upgradeable via Web
Standard IEEE 802.11n
IEEE 802.11b, IEEE 802.11g
IEEE 802.3 10BaseT Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.1d Spanning Tree
Interface LAN:5x10/100Base-TX with Automatic MDI/MDIX port
Security 64/128-bit WEP
WPA-PSK (TKIP/AES), WPA2 -PSK (TKIP/AES)
IEEE802.1x
RADIUS
Disable Broadcast SSID
MAC Address Filtering
RF
Frequency Band 2.400~2.4835GHz 802.11n
backward compatible with 802.11b/g
RF Modulation 802.11b : DSSS, CCK, QPSK, BPSK
802.11g : OFDM
802.11n : 64QAM, 16QAM, QPSK, BPSK
Antenna 3 x Fixed 2T3R 3dBi Antenna
Receive Sensitivity 11n (300Mbps): 20MHz: -71dBm, 40MHz: -68dBm,
11g(54Mbps): -74dBm,
11b(11Mbps): -87dBm
Output Power 16dBm
Operating Mode AP
AP Bridge-Point to Point
AP Bridge-Point to Multi-Point
AP Bridge-WDS
Management Support Radius Server
Supports WMM function
Web User Interface
Firmware Upgrade
Hardware
CPU Ralink RT1310
RAM 16MB SDRAM
Flash 4MB NOR Flash
Switch Realtek RTL8305SC (5 Port Switch)
RF Module Wireless Module Ralink RT2860 + RT2820
Environment Operating Temperature:10° ~ 40°
Humidity: 10% ~ 90%(non condensing)
Power Supply 12 VDC, 1A Switching Power Adaptor
Dimensions 30 (H) x 187(W) x 100(D) (mm)
Certificate FCC , CE
Downloads
User Manual Download here

<

>

X