Discontinued Item

SEC-C1002 IP Camera

The C1002 is a new indoor camera which offers fantastic functionality for an incredible low cost. C1002 is an IP ethernet camera which supports DHCP, PPPoE ADSL dial-up and DDNS client.

The C1002 is a standalone camera with broadband connection which allows remotely viewing of images by Microsoft IE browser anywhere, any time (will also work with Firefox using an IE Tab).

Just like any network device, with its own IP address, the C1002 connects directly to a standard network. This enables viewing real time digital video over the LAN or Internet from all over the world. It has an embedded WEB server and real-time operating system with Standalone Motion Detection alarm offering 24/7 operation in the most demanding of environments.

See the Solwise office live via the C1002

SEC-C1002
Click on image for a larger view
 Camera Bracket for indoor use
Camera and separate bracket
 

Product Features
Back View
Bottom View
Click on images to see larger view

- A least cost solution for remote monitoring
- A highly developed on-board image processor
- An inbuilt WEB server and standalone motion detection
- JPEG and MJPEG video compression
- Access by IE browser (or Firefox with IE tab - PC only), no complicated client software required.
- View 1 or 4 cameras image on your browser screen
- Recording via browser screen, playback by media player
- Simultaneous Multiple Accesses from remote, LAN or Internet
- Single level password used to access image and settings
- Email snapshots enable sending alarm notifications to assigned e-mail boxes
- Easy IP camera tool & quick install guide are included in product CD
- PPPoE & DHCP accompany with DDNS service
- Connect to ADSL/Cable Modem or NAT router
- Monitoring/ video recording is included in hardware
Specifications
Image System

Compression: MJPEG hardware compression
350,000 pixels CMOS sensor
f: 6.0mm to infinity, C/CS mount lens
Min. 0 Lux with IR Leds
Automatic Exposure Control
Automatic Gain Control
Automatic Brightness Control
Automatic White Balance
Flicker Avoidance (Flicker less)
Resolution:

QVGA (320 x 240)
VGA (640 x 480)
Image Frame Rate:
Max. 25 fps at QVGA resolution, average 4 Mbps/sec
Max. 15 fps at VGA resolution, average 4 Mbps/sec

I/O Interface

CAT5, RJ-45 x1 (802.3)
Single, digital alarm input
Network Protocols TCP/IP, HTTP, ARP, ICMP, PPPoE, DHCP, SMTP,
DDNS Client
Power Requirement

5 V / 1A
Operation Temp

-10 C to 50 C
Humidity

Rh10 % to 90 %
Press Mentions
ECN Magazine Click here for copy May 2009
Downloads
Quick Installation Guide Download here 04.03.08

<

>

X