Typical assembly
Showing QuadFace, Blank, CAT5, BT and a spare slot

CON-MOD-BT (608A)

BT (PSTN) Master socket

CON-MOD-CAT5

Standard RJ45 network patch socket. Also accepts RJ11 and RJ12 plugs

CON-MOD-CAT6

Cat 6 RJ45 25 x 50mm module

CON-MOD-BLANK

Fills unused positions

CON-MOD-BLANK-HALF

Fills unused positions. Use two of these with the CON-MOD-DUALFACE to
create a 'Single Face'

CON-MOD-DUALFACE

Two position faceplate

CON-MOD-QUADFACE

Four position faceplate

CON-10MMSINGLESPACER

10mm spacer for single backbox

NET-BACKBOX (Single)

85mm square surface mount 'pattress' box for a DUALFACE faceplate or a single 13A mains socket

Depth of box: 32mm

NET-BACKBOX-DL (Single)

85mm square dry lining box for a DUALFACE faceplate or a single 13A mains socket. Large flange around the front prevents the box from slipping into the cavity. Manufactured from flame retardant thermoplastic. Tough yellow nylon lugs have large bearing faces for superior strength. Suitable for board thicknesses of 6.35 to 15mm. Cut out: 73 x 73mm.

Depth of box: 36mm

NET-BACKDOUBLE

Surface mount 'pattress' box for a QUADFACE faceplate or a dual 13A mains socket

Depth of box: 32mm

NET-BACKDOUBLE-DL

Dry lining box for a QUADFACE faceplate or a dual 13A mains socket. Large flange around the front prevents the box from slipping into the cavity. Manufactured from flame retardant thermoplastic. Tough yellow nylon lugs have large bearing faces for superior strength. Suitable for board thicknesses of 6.35 to 15mm. Cut out: 133 x 73mm.

Dimensions: 143 x 83 x 36mm

CON-JBOX-IDC8

8way Krohn junc box (CAT5/telephony/etc)

RJS-SURFACE

RJ11 Surface Mount Socket