Please wait while we sign you in...
EXISTING USERS
Sign in by entering your details below
(Optional: not needed to place orders)
---
Please wait while we process your request...
--- ITEMS IN YOUR TROLLEY
Please wait while we load your trolley...
SUBTOTAL: ---
(inc. VAT)
^
v
<<
>>
Click the image to enlarge
What It Does
The G3224P from IP Com is an Ethernet PoE Switch designed to build reliable and smart wireless network. Providing 24-10/100/1000 Base-T Ethernet ports and 4 SFP slots for high-access-capability. 1~ 24 port supports IEEE 802.3af PoE(15.4W) or 802.3at PoE+(30W) power supply, and PoE output total power up to 370W. Providing DC power and data transmission for AP, IP Phone and IP Camera through category 5 twisted pair. Providing safer protection system, excellent QoS strategy, rich VLAN function and stronger maintenance and management, which is a safe and easy PoE switch for your ideal choice.
Product Features
Enhanced Ethernet PoE+ function
Providing 24-10/100/1000 Base-T Ethernet ports(PoE) and 4 SFP slots. 1-24 port supports IEEE 802.3af PoE(15.4W) or 802.3at PoE+(30W) power supply, and PoE output maximum power up to 370W. Providing DC power and data transmission for AP, IP Phone and IP Camera through category 5 twisted pair. Support PoE power smart management and support to setup supplied power and priority according to the powered device.
Hardware security protection
Support ARP intrusion detection to prevent Hacker or "man in the middle" attack caused by ARP spoof, discarding the illegal ARP spoofing message which is inconformity with DHCP Snooping dynamic-binding-table or manual static-binding-table. Support IP Source Check, preventing Invalid address from MAC deceive,IP deceive, MAC/IP deceive and the deuterogenic DoS attack. Plus, DHCP Snooping function can completely eradicate the private DHCP servers to ensure the authenticity and consistency of DHCP environment.
Service security
Effectively prevent MAC-base attacks. Permit or restrict flow based on MAC address, or setup the maximum number of MAC address by port-permited, allow static allocation by administrator for MAC address on appointed port or switch dynamic learning.
User security
Support the user authentication by 802.1X and MAC authentication, permiting the access from legal user and refusing the access from illegal user. Reduce the harm to nerworking security by checking and controlling the user` legality.
Reliable industrial grade design
Quality: Mean Time Between Failures--MTBF≥100,000 hours
Stability: 64 byte packet, time delay less than 10μs, packet loss ratio: 0
Restorability: when network is not stable or error occurs, reboot time less than 10s
Normal operating: operating in -10ºC to 45ºC, device service time over 3 years
| Download specification datasheet | |
|---|---|
| Standard and protocol supported | IEEE 802.3、 IEEE 802.3u、IEEE 802.3z、IEEE 802.3ab、IEEE 802.3x、IEEE 802.1D、IEEE 802.3af、IEEE 802.3at |
| Linear-speed exchange on the second layer | linear-speed of all ports up to 35.7Mbps |
| Backplane bandwidth | 56Gbps |
| Performance | Store and forward: Yes Exchange capacity: 56Gbit/s MAC Address entries: 8K, Support setting the maximum number of MAC addresses for learning |
| Port and Module |
Fixed ports: Optional modules: |
| Indicators | POWER,SYS,LINK/ACT,SPEED,SFP,POE |
| Optional power supply |
Power supply module: Voltage input range: |
| Dimensions | 440*284*44mm (L*W*H) |
| Weight | ≈5kg |
| Power consumption | Total unit power consumption up to 450W Total PoE consumption up to 370W |
| Operating temperature | 0ºC～45ºC |
| Storage temperature | -40ºC～70ºC |
| Relative humidity(Operational) | 10%～95%（noncondensing） |
| Relative humidity(Storage) | 10%～95%（noncondensing） |
| Software Features | |
| Link aggregation | Support LACP Support manual link aggregation Support up to 12 link aggregation groups and up to 16 GE ports per link aggregation group |
| PoE management | Support setup of PoE and power adjustable by priority Support over temperature protection for PoE module Support graphical management, detection of PD equipment and setting of the power consumption |
| Second looped network protocol Layer 2 ring network protocols |
Support STP/RSTP/MSTP Support looped Network for devices |
| VLAN | Support VLAN(4K) based on ports and stardand Support Voice VLAN, VLAN Mapping, VLAN VPN（QinQ） |
| DHCP | Support DHCP Snooping、DHCP Relay/Client/Server Support DHCP Snooping Option82/DHCP Relay Option82 |
| Support ACL | Provide advanced security strategies and L2~L4 packet filter Support ACL based on Time Range |
| Support QoS | Support message transmission for ports and limitation of speed Support redirect message and CAR Support 8 ports for output sequence Support SP&WRR Support remark for 802.1p/DSCP priority Support management for QoS Profile |
| Security service | Support management for user classification and password protection Support IEEE 802.1X authentication Support centralized MAC address authentication Support intrusion detection of ARP and protection of IP source address Support SSH2.0 and port isolation |
| Management and maintenance | Support downloading and upgrading through XModem/FTP/ TFTP Support configuration through CLI, Telnet, Console port Support SNMP v1/v2/v3 and WEB-based management Support RMON(Remote Monitoring) 1,2,3,9 RMON groups of MIB information Support system log, hierarchical alarm, debugging information output Support PING, Traceroute, Multicast Traceroute Support remote maintenance through telnet Support VCT Support DLDP Support loopback detection |
| *PoE switches and injectors can be used to power PoE compliant devices up to the total power output supported for the LAN port and the switch or injector as a whole. Users must ensure that their connected device keeps within the maximum PoE power permitted per LAN port of the switch or injector and also the total power for all connected devices is less than the maximum total PoE power that the switch or injector can provide. For example, if the PoE switch is maximum 30W per port (so it conforms to 802.11at) but the maximum PoE power for the switch is 60W and the access point you are connecting is 18W maximum then, even if the switch has 8 PoE LAN ports, you can still only power a maximum of three access points. Damage caused to the switch or injector by over loading the power budget is NOT covered by warranty. |
|
| User Guide | Download here | 15.09.15 |
|---|---|---|
| Quick Installation Guide | Download here | 15.09.15 |
| IP COM Case Studies | Download here | 19.05.17 |
|---|
| Power over Ethernet Switches Comparison Chart | Download here | 07.11.14 |
|---|---|---|
| Smart Switches Comparison Chart | Download here | 06.11.14 |
| Specification Datasheet | Download here | 06.11.14 |
<
>
X
