Click the image to enlarge

IP-F1109P - Discontinued Item

IP Com 9 Port 10/100 Mbps Desktop Switch with 8 Ports PoE

  • PoE: Supports IEEE 802.3at and IEEE 802.3af standard. A single PoE port output power is up to 40W
  • One-key VLAN: Solid DIB switch to easily divide VLANs.
  • Uplink Port Lightning-proof: ≥4KV. Up to 150m transfer distance (power/data)
  • 120W Total PoE Budget*
  • 2 year return to base warranty

Golden Distributor




What It Does 

The F1109P from IP-Com is a 9-Port 100Mbps Unmanaged Switch with  8 PoE ports. It has 9 10/100Mbps auto-negotiated RJ45 ports. Ports 1~8 support IEEE802.3af/IEEE802.3at PoE power supply, and can automatically detect and identify the IEEE802.3af/IEEE802.3at-based powered devices, and can suppply PoE power for them via Ethernet cables. The uplink port is equipped with a lightning protection circuit, which is 4KV lightning-proof. One-key VLAN devision feature can help restraint broadcast storm and defense DHCP spoofing.  


1、Compatible with IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3af, and IEEE 802.3at standards.
2、1.8Gbps backbound bandwidth,1.34Mpps packets forwarding speed,Supports nonblocking wire speed switching
3、Supports uplink port ligthning-proof,Ports 1~8 are PoE-capable,Output power of a single port is up to 40W.  
4、Transfer distance is up to 150m (standard Cat.5e or Cat.6). 
5、One-key VLAN: Solid DIB switch to devide port VLAN easily.  

The main feature with the F1109P is that it has simple VLAN based port-to-port isolation activated by a simple switch on the front panel. So, for example, if you have an Access Point on each port the users connected to different APs wont be able to 'see' each other over the network. Ideal for public wifi applications. This feature could be implemented using a typical Smart Switch BUT a Smart Switch would be a lot more expensive if all you wanted to do was this one feature.


Standard&Protocol IEEE 802.3、 IEEE 802.3u、IEEE 802.3z、IEEE802.3ab、IEEE 802.3x、IEEE 802.3af、IEEE 802.3at
Port Description Support IEEE802.3x flow control (half/full duplex)
One 10/100BASE-TX uplink port
Port Features Support IEEE802.3x flow control (half/full duplex)
Implemented via the VLAN ON/OFF switch on the front panel
VLAN ON: Ports 1-8 are isolated, but they can communicate with port 9;
VLAN OFF: Ports 1-9 can intercommunicate with each other.
LEDs Link/Act, PoE, Power, PoE-MAX
Switching Capacity Backplane Bandwidth 1.8Gbps
Packet Forwarding Rate 1.34Mpps
Full duplex on each port
MAC Adress Table 4k
Switching Mode Storage & forward
Power DC Input 51V DC, 2.5A (external power supply)
Power Consumption: <120W
Maximum PoE Output Power: 115W
Power Module PoE 802.3af(15.4W)/802.3at(30W)/Max Output 40W
Dimensions(L×W×H ) 235mm*103mm*27mm
Weight <2kg
WorkingTemperature -10℃~45℃
Working Humidity 10%~90%(Non condensing)
Operating temperature -10ºC~45ºC
Storage temperature -40ºC~70ºC
Relative humidity(Operational) 10%~95%(noncondensing)
Relative humidity(Storage) 10%~95%(noncondensing)
Certification FCC, CE, RoHS
*PoE switches and injectors can be used to power PoE compliant devices up to the total power output supported for the LAN port and the switch or injector as a whole.

Users must ensure that their connected device keeps within the maximum PoE power permitted per LAN port of the switch or injector and also the total power for all connected devices is less than the maximum total PoE power that the switch or injector can provide. For example, if the PoE switch is maximum 30W per port (so it conforms to 802.11at) but the maximum PoE power for the switch is 60W and the access point you are connecting is 18W maximum then, even if the switch has 8 PoE LAN ports, you can still only power a maximum of three access points.

Damage caused to the switch or injector by over loading the power budget is NOT covered by warranty.