Discontinued Item

Power over Ethernet

Rack Mount 8 port Managed PoE Injector. (Use in conjunction with 10/100 Mbps Ethernet Hub or Switch)
- IEEE802.3af compliance, Power over Ethernet Mid-Span mode
- Remote power feeding up to 100 meters and for IEEE802.3 10Base-T, IEEE 802.3u 100Base-TX standard
- Centralized power distribution for PoE powered Device (PD) and system support over 130Watts
- Auto detect PD and classification power consumption level
- High safety short circuit protection to prevent cable short

Read our PoE white paper - Discusses PoE technology, what it's used for. How it works. Also discusses some of our PoE products.

Stock Code
(Mfr part code: PHUB-0800TI)
Download manual
Further Specifications


Industrial Standard:
Standard: IEEE 802.3af Power over Ethernet
IEEE 802.3 (10BaseT Ethernet)
IEEE 802.3u (100BaseTX, 100BaseFX Fast Ethernet)
Ports: 8×10/100Mbps TX RJ-45
1× male DB9 RS232 console interface
Management utility: Support Microsoft windows based application for power management.
Plug and play for standard PD and without any software configuration.
Port configuration control: System calibrate, AC power line frequency rejection, IEEE 802.3af resistor range adjust
LED Indicator: System , Power ON/OFF
Connector: Data in: 8 x RJ-45, Data pin 1,2,3,6
Data and power out: 8 x RJ-45. Data pin 1,2,3,6 Power pin (V+): 4,5 , Power pin(V-) :7,8
Fault status detect: Null: no PD present
Overload: current support over 475mA @ DC 48V and over 50 milliseconds
DR fail: PD discovery resistor is not in the limited range
Out put power: Per port DC 48V@350mA (Maximum), Per system 130 Watts (maximum)
Power over Ethernet mode: Mid-Span
Power consumption: 130 W (maximum)
Ventilation: 2 DC Fans with detect function
Device power supply: 100~240V AC,50/60Hz,130Watts IEC power socket with fuse and power switch
Dimensions: 440mm(W) x 224mm(D) x 44mm(H)
Operating environment: 0° ~40° C , 10%~95%RH
Storage environment: -40°~70°, 95% RH
Certificate: CE ,FCC