Click the image to enlarge
EnGenius 48-Port Gigabit PoE+ L2 Managed Switch & 4 Dual-Speed SFP
- 48 Gigabit PoE+ Ports, IEEE802.3at/af support
- 4 Available SFP Slots
- Internal Power Supply with 740W PoE Budget*
- IGMP and MLD snooping provides advanced multicast filtering
- IEEE802.3ad Link Aggregation
- Access Control List & Port Security
- IEEE802.1X and RADIUS Authentication
- 19" Rackmount
The EnGenius Layer 2 switch includes IGMP Snooping, MLD Snooping, Port Mirroring, Rapid Spanning Tree, Multiple Spanning Tree, Spanning Tree, VLAN group, Voice VLAN, ACL, 802.1X port security, SNMP v1/v2c/v3 and IEEE802.3ad Link Aggregation Control Protocol (LACP). The EGS7252FP includes 48 Gigabit PoE (10/100/1000 Mbps) ports and four SFP (copper/hot-swappable small form-factor pluggable) Gigabit ports for optional fiber connectivity. IT managers or VARs who are expanding network deployments for businesses, schools, resorts and hotels, or other expansive venues can expect superior performance and reliability at a price point that is much more attractive than from larger, more enterprise-focused network brands.
Include four (4) SFP Slots to accept fiber transceivers for extending the wired network beyond the limitation of Ethernet cabling with fiber cabling. Especially useful for schools with satellite classrooms, hotels and resorts, and other large multiple building properties.
|Standard||Switching Capacity: 104Gbps
Forwarding Mode: Store and Forward
Flash Memory: 32MB
|Port Functions||48 10/100/1000Mbps Ports in the front panel
4 100/1000Mbps SFP Slot
1 RJ45 Console Port
|PoE Capability||PoE standard: Port 1~48 Support IEEE 802.3at/af
PoE Capable Ports: Port 1~48 can output up to 30W
Power budget: 740Watts
Power LED x1
Fault LED x1
PoE Max LED x1
LAN Mode LED x1
PoE Mode LED x1
LAN/PoE Mode, Link/Act
|Environmental & Mechanical|
|Temperature Range||Operating: 32 to 104°F / 0 to 40°C
Storage: -40 to 158°F / -40 to 70 °C
|Humidity (non-condensing)||5% - 95%|
802.3ad compatible Link Aggregation
|*PoE switches and injectors can be used to power PoE compliant devices up to the total power output supported for the LAN port and the switch or injector as a whole.
Users must ensure that their connected device keeps within the maximum PoE power permitted per LAN port of the switch or injector and also the total power for all connected devices is less than the maximum total PoE power that the switch or injector can provide. For example, if the PoE switch is maximum 30W per port (so it conforms to 802.11at) but the maximum PoE power for the switch is 60W and the access point you are connecting is 18W maximum then, even if the switch has 8 PoE LAN ports, you can still only power a maximum of three access points.
Damage caused to the switch or injector by over loading the power budget is NOT covered by warranty.
|Firmware for this product should only be sourced via the Solwise or EnGenius Networks Europe B.V. websites. If it is sourced elsewhere it may damage your device and invalidate the warranty. We can't provide service support to devices which are not running with ETSI firmware.||EnGenius Networks Europe B.V. Downloads Site||27.10.16|
|User Manual||Download here||28.07.16|
|Quick Installation Guide||Download here||28.07.16|
|CLI Manual||Download here||28.07.16|