Click the image to enlarge
EnGenius 24-Port Gigabit PoE+ L2 Managed Switch & 4 Dual-Speed SFP
- 24 Gigabit ports with IEEE 802.3at/af PoE Support
- 4 Available SFP Slots
- Internal Power Supply with 185W PoE Budget
- PoE ports are 10/100/1000meg - 802.3af/at (30W per port up to the total PoE power of the switch)
- Full Neutron Managed WiFi Integration
- Full PoE power management
- Full L2/Smart management
- Link Aggregation
- Bandwidth control
- Access Control
- Port and 802.1Q VLAN support
- 19" Rackmount
The EGS7228P is a 24-Port Gigabit PoE+ Layer 2 Switch with 4 Dual-Speed SFP ports for fiber uplinks. The EGS7228P includes 24 Gigabit PoE (10/100/1000 Mbps) ports and four SFP (copper/hot-swappable small form-factor pluggable) Gigabit ports for optional fiber connectivity. Managing the wired portion of the network is easy using the Switch’s browser-based interface. The EGS7228P is a full featured Gigabit Ethernet Switch with comprehensive Layer 2 switching capabilities. The EnGenius Layer 2 Switch includes IGMP Snooping, MLD Snooping, Port Mirroring, Rapid Spanning Tree, Multiple Spanning Tree, Spanning Tree, VLAN group, Voice VLAN, ACL, 802.1X port security, SNMP v1/v2c/v3 and IEEE802.3ad Link Aggregation Control Protocol (LACP).
Ideal for Networks in Large Buildings or Linking Remote Buildings on a Campus
Includes 4 Dual Speed SFP ports to support transceivers for fiber cabling for connectivity to offices, buildings, or other parts of the network that exceed the distance capability of regular Ethernet.
Clear Quality and Efficient Voice Communications
Provides 802.1Q VLAN support for improved convergence and bandwidth utilization and automates the process of setting up VoIP devices on a network. Voice VLAN guarantees.
Provides Full-Featured Layer 2 Manageability
The full-featured, managed Layer 2 Switch includes: VLAN, QoS, IGMP/MLD Snooping, STP/RSTP/MSTP, Link Aggregation Control Protocol (LACP), SNMP v1/v2c/v3, and more.
Makes Your Network More Secure
Supports 802.1X port-based authentication, so IT managers can authenticate clients via external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security and protects the network by screening traffic from unauthorized MAC or IP addresses.
Provides Power and Connectivity to a Variety of Devices
Up to 30W per port with a total PoE budget of 185W. PoE+ IEEE 802.3at/af Support enables Access Points, Client Bridges, IP Surveillance Cameras, VoIP telephones and more to be powered directly from the Switch over an Ethernet cable.
|Standard||Switching Capacity: 56Gbps
Forwarding Mode: Store and Forward
Flash Memory: 16MB
|Port Functions||24 10/100/1000Mbps Ports in the front panel
4 100/1000Mbps SFP Slot
1 RJ45 Console Port
|PoE Capability||PoE standard: Port 1~24 Support IEEE 802.3at/af
PoE Capable Ports: Port 1~24 can output up to 30W
Power budget: 185Watts
Power LED x1
Fault LED x1
PoE Max LED x1
LAN Mode LED x1
PoE Mode LED x1
LAN/PoE Mode, Link/Act
|L2 Features||802.1D Spanning Tree (STP)
802.1s Multiple Spanning Tree (MSTP)
802.1w Rapid Spanning Tree (RSTP)
IGMP Snooping v1/v2/v3
802.3ad Link Aggregation
MAC Address Table
|VLAN Features||802.1Q VLAN
Management VLAN ID
|CoS Features||CoS based on DSCP
CoS based on 802.1p Priority
CoS based on Physical Port
|PoE Management||Power Class Configuration
Power Feeding with Priority
User Defined Power Limit
|Security||802.1X Port Based Access Control/Guest VLAN
SSH / Telnet / Http(s)
Storm Control (Broadcast/Multicast/Unknown unicast)
DoS Attack Prevention
BPDU Attack Prevention
MAC, IPv4, IPv6 ACL
Command Line Interface (CLI)
Web UI, Supports Non IE Browser (Chrome, Firefox, Safari)
RMONv1 (Supports 4 Groups)
MIB Support (RFC1213, RFC1493, RFC1757, RFC2674)
|Temperature Range||Operating: 32 to 104°F / 0 to 40°C
Storage: -40 to 158°F / -40 to 70 °C
|Humidity (non-condensing)||5% - 95%|
|*PoE switches and injectors can be used to power PoE compliant devices up to the total power output supported for the LAN port and the switch or injector as a whole.
Users must ensure that their connected device keeps within the maximum PoE power permitted per LAN port of the switch or injector and also the total power for all connected devices is less than the maximum total PoE power that the switch or injector can provide. For example, if the PoE switch is maximum 30W per port (so it conforms to 802.11at) but the maximum PoE power for the switch is 60W and the access point you are connecting is 18W maximum then, even if the switch has 8 PoE LAN ports, you can still only power a maximum of three access points.
Damage caused to the switch or injector by over loading the power budget is NOT covered by warranty.
|Firmware for this product should only be sourced via the Solwise or EnGenius Networks Europe B.V. websites. If it is sourced elsewhere it may damage your device and invalidate the warranty. We can't provide service support to devices which are not running with ETSI firmware.||EnGenius Networks Europe B.V. Downloads Site||27.10.16|
|User Manual||Download here||05.04.16|
|Quick Installation Guide||Download here||05.04.16|
|CLI Manual||Download here||05.04.16|