^

EL-EGS5212FP EL-EGS5212FP EL-EGS5212FP EL-EGS5212FP EL-EGS5212FP Switch Comparison

v


<<

>>

Click the image to enlarge

EL-EGS5212FP

EnGenius 8-Port Gigabit PoE+ Layer 2 Switch with 2 Gigabit Uplink Ports & 2 Dual-Speed SFP

  • 8 Gigabit PoE+ Ports, IEEE802.3at/af support
  • 2 Gigabit uplink ports and 2 SFP slots for additional connectivity
  • Internal Power Supply with 130 W PoE Budget*
  • PoE ports are 10/100/1000meg - 802.3af/at (30W per port up to the total PoE power of the switch)
  • Neutron WiFi Integration Compatible (Switch only, not a controller)
  • Full PoE power management
  • Full L2/Smart management
  • Link Aggregation
  • Bandwidth control
  • Access Control
  • Port and 802.1Q VLAN support
  •  

Authorised Distributor

»

Buy Now

EL-EGS5212FP

 


Overview

The EGS5212FP is a full featured Gigabit Ethernet switch with comprehensive Layer 2 switching capabilities and PoE+ support. It provides 8 Gigabit ports that support IEEE802.3at/af PoE+, two 1 GbE connectivity for uplinks that allow SMBs to deliver higher bandwidth for congestion relief and 2 SFP slots for fiber transceivers that can extend the reach of the network beyond the limitation of
Ethernet cabling. With rich Layer 2 management features, the EGS5212FP allows quick deployment and simplified maintenance as well as seamless upgrades, making it the ideal networking solution for businesses looking for the best combination of features, performance and value.

8 Gigabit PoE+ Ports, IEEE802.3at/af support

For connecting standard PoE client devices (IP Surveillance Cameras, VoIP telephone systems and wireless access points) and for PoE client devices that require more operational power like some 802.3at-rated access points (i.e., the EnGenius EAP900H Dual Band N900 Ceiling Mount Access Point).

 

2 Gigabit uplink ports and 2 SFP slots for additional connectivity

Two Gigabit uplink ports that allow network administrators to deliver higher bandwidth for congestion relief and two SFP (copper/hot-swappable small form-factor pluggable) Gigabit ports for optional fiber connectivity for VARs expanding network deployments for businesses, schools, resorts and hotels, or other large properties.

 

Layer 2 Management and Visibility

Designed for easy network management and can quickly be added to an existing rack of other branded L2 and L3 switches. Configuring the switch is made through an intuitive and user-friendly Web interface for quick and easy management.

 

VLAN and Voice VLAN

Provides 802.1Q VLAN support for improved convergence and bandwidth utilization

 

IEEE802.1X and RADIUS Authentication
So IT managers can authenticate clients via external RADIUS servers

Neutron WiFi Integration Compatible (Switch only, not a controller)

Specifications

Download Specification Datasheet

Electron Solution Datasheet

Technical Specification
Standard Switching Capacity: 24Gbps
Forwarding Mode: Store and Forward
SDRAM: 256MB
Flash Memory: 32MB
Port Functions 8 10/100/1000Mbps Ports in the front panel
2 100/1000Mbps Gigabit uplink ports
2 100/1000Mbps SFP Slot 
1 RJ45 Console Port
PoE Capability PoE standard: Port 1~8 Support IEEE 802.3at/af
PoE Capable Ports: Port 1~8 can output up to 30W
Power budget: 130 watts
LED Indicator Device:
Power LED x1
Fault LED x1
PoE Max LED x1
LAN Mode LED x1
PoE Mode LED x1
Copper Ports:
LAN/PoE Mode, Link/Act
SFP Ports:
Link/Act
L2 Features 802.1D Spanning Tree (STP)
802.1s Multiple Spanning Tree (MSTP)
802.1w Rapid Spanning Tree (RSTP)
MLD Snooping
IGMP Snooping v1/v2/v3
802.3ad Link Aggregation
Port Mirroring
Port Trunking
LLDP
MAC Address Table
Bandwidth Control
VLAN Features 802.1Q VLAN
Management VLAN ID
Port-based VLAN
Voice VLAN
CoS Features CoS based on DSCP
CoS based on 802.1p Priority
CoS based on Physical Port
PoE Management Power Class Configuration
Power Feeding with Priority
User Defined Power Limit
Security 802.1X Port Based Access Control/Guest VLAN
RADIUS Authentication
SSH / Telnet / Http(s)
Port Security
Storm Control (Broadcast/Multicast/Unknown unicast)
DoS Attack Prevention
BPDU Attack Prevention
MAC, IPv4, IPv6 ACL
Management User Management
Dual Image
Web-based Support
SNMP v1/v2c/v3
TFTP Upgrade
Command Line Interface (CLI)
SNTP
Web UI, Supports Non IE Browser (Chrome, Firefox, Safari)
RMONv1 (Supports 4 Groups)
SYSLOG
Cable Diagnostics
MIB Support (RFC1213, RFC1493, RFC1757, RFC2674)
Temperature Range Operating: 32 to 104°F / 0 to 40°C
Storage: -40 to 158°F / -40 to 70 °C
Humidity (non-condensing) 5% - 95%
*PoE switches and injectors can be used to power PoE compliant devices up to the total power output supported for the LAN port and the switch or injector as a whole.

Users must ensure that their connected device keeps within the maximum PoE power permitted per LAN port of the switch or injector and also the total power for all connected devices is less than the maximum total PoE power that the switch or injector can provide. For example, if the PoE switch is maximum 30W per port (so it conforms to 802.11at) but the maximum PoE power for the switch is 60W and the access point you are connecting is 18W maximum then, even if the switch has 8 PoE LAN ports, you can still only power a maximum of three access points.

Damage caused to the switch or injector by over loading the power budget is NOT covered by warranty.

Downloads

Firmware for this product should only be sourced via the Solwise or EnGenius Networks Europe B.V. websites. If it is sourced elsewhere it may damage your device and invalidate the warranty. We can't provide service support to devices which are not running with ETSI firmware. EnGenius Networks Europe B.V. Downloads Site 27.10.16
EGS Layer 2 Managed PoE+ Switches User Manual Download here 08.09.15
EGS Switch Quick Installation Guide Download here 08.09.15
EnGenius L2 Switch CLI Manual 03052014 Download here 08.09.15

Reviews

Brochures

EGS layer2 Switch Comparison Download here 05.04.16
Power over Ethernet Switches Comparison Chart Download here 07.11.14
Smart Switches Comparison Chart Download here 06.11.14

Videos & Articles

Accessories


<

>

X