^

EL-EGS5110PRear view

v


<<

>>

Click the image to enlarge

EL-EGS5110P

EnGenius PoE Switch 8 ports 130W Total Power

  • 8 Gigabit ports with IEEE802.3 at/af PoE Support
  • 2 SFP slots
  • 130W Total PoE Budget*
  • PoE ports are 10/100/1000meg - 802.3af/at (30W per port up to the total PoE power of the switch)
  • Neutron WiFi Integration Compatible (Switch only, not a controller)
  • Full PoE power management
  • Full L2/Smart management
  • Link Aggregation
  • Bandwidth control
  • Access Control
  • Port and 802.1Q VLAN support
  • 13" Rackmount

Authorised Distributor

»

Buy Now

EL-EGS5110P

 


Overview

The EnGenius EGS5110P is a Smart PoE Switch that offers 8 Gigabit ports with IEEE802.3 at/af PoE support on all its ports and 2 SFP slots for fibre uplinks.

EnGenius Smart PoE (Power-over-Ethernet) Gigabit Switches are specifically designed to meet the needs of small-to-medium sized businesses. It's ideal for companies that need a way to connect and power VoIP phone systems, IP Cameras and Wireless Access Points throughout their facilities. These robust and fully-managed, yet cost-effective switches will help to keep their employees connected, safe and productive. The EGS5110P delivers up to 30 watts per port over connected Ethernet cables to powered devices. Total PoE Budget* - 130W.

EnGenius switches also include embedded QoS intelligence to prioritize delay-sensitive services such as voice and video, simplify unified communications deployments, and help ensure consistent network performance for all services. For example, automated voice VLAN capabilities let you plug any IP phone into your IP telephony network and receive an immediate dial tone.

The 13-inch wide EGS5110P can be used as a desktop or rack-mounted switch. It includes bracketing hardware so it can be placed into a stack of other 1U chassis switches.

Neutron WiFi Integration Compatible (Switch only, not a controller)

Specifications

Switching Capacity 20 Gbps



Max. Forwarding Rate (64kBytes) 14.88Mpps
Forwarding Mode Store and Forward
Packet Buffer memory 512K Bytes
Flash Memory 4MB
Port Functions 8 10/100/1000Mbps Ports in the front panel
2 1000Mbps SFP Slot
PoE Capability PoE standard: Port 1~8 Support IEEE 802.3at/af
PoE Capable Ports: Port 1~8 can output up to 30W
PoE Budget*: 130 Watts
LED Indicator Device:
Power LED x1
Fault LED x1
PoE Max LED x1
LAN Mode LED x1
PoE Mode LED x1
SFP/Copper Ports:
LAN/PoE Mode, Link/Act
Temperature Range Operating: 32 to 104°F / 0 to 40°C
Storage: -40 to 158°F / -40 to 70 °C
Humidity (non-condensing) 5% - 95%
L2 Features 802.1D Spanning Tree (STP)
802.1s Multiple Spanning Tree (MSTP)
802.1w Rapid Spanning Tree (RSTP)
MLD Snooping
IGMP Snooping v1/v2/v3
802.3ad Link Aggregation
Port Mirroring
Port Trunking
LLDP
MAC Address Table
Bandwidth Control
VLAN Features 802.1Q VLAN
Management VLAN ID
Port-based VLAN
Voice VLAN
CoS Features CoS based on DSCP
CoS based on 802.1p Priority
CoS based on Physical Port
PoE Management Power Class Configuration
Power Feeding with Priority
User Defined Power Limit
Security 802.1X Port Based Access Control/Guest VLAN
RADIUS Authentication
SSH / Telnet / Http(s)
Port Security
Storm Control (Broadcast/Multicast/Unknown unicast)
DoS Attack Prevention
BPDU Attack Prevention
MAC, IPv4, IPv6 ACL
Management User Management
Dual Image
Web-based Support
SNMP v1/v2c/v3
TFTP Upgrade
Command Line Interface (CLI)
SNTP
Web UI, Supports Non IE Browser (Chrome, Firefox, Safari)
RMONv1 (Supports 4 Groups)
SYSLOG
Cable Diagnostics
MIB Support (RFC1213, RFC1493, RFC1757, RFC2674)
*PoE switches and injectors can be used to power PoE compliant devices up to the total power output supported for the LAN port and the switch or injector as a whole.

Users must ensure that their connected device keeps within the maximum PoE power permitted per LAN port of the switch or injector and also the total power for all connected devices is less than the maximum total PoE power that the switch or injector can provide. For example, if the PoE switch is maximum 30W per port (so it conforms to 802.11at) but the maximum PoE power for the switch is 60W and the access point you are connecting is 18W maximum then, even if the switch has 8 PoE LAN ports, you can still only power a maximum of three access points.

Damage caused to the switch or injector by over loading the power budget is NOT covered by warranty.

Downloads

Firmware for this product should only be sourced via the Solwise or EnGenius Networks Europe B.V. websites. If it is sourced elsewhere it may damage your device and invalidate the warranty. We can't provide service support to devices which are not running with ETSI firmware. EnGenius Networks Europe B.V. Downloads Site 27.10.16
Quick information guide Download here 14.03.14
User Manual Download here 14.03.14

Reviews

Brochures

Power over Ethernet Switches Comparison Chart Download here 07.11.14
Smart Switches Comparison Chart Download here 06.11.14

Videos & Articles

Accessories


<

>

X