Front viewAV mains Passthrough adapterHow small is this! (Photo taken in a girls hand) Plug View





Click the image to enlarge


Solwise HomePlug 200Mbps AV

  • Mains Passthrough
  • Simple Connect
  • No New Wires communications to any room
  • Atheros/Intellon INT6400 high-speed powerline chipset
  • Supports simultaneous High Definition (HD) and Standard Definition (SD) video distribution, whole-house audio, Voice Over IP and high speed Internet in addition to data networking
  • 1.8metre network cable included


Single Pack


The Solwise Home Plug Ethernet Adaptor provides No New Wires communications to any room, over any powerline wires, at the speed of up to 200Mbps.

Targeted at the residential users, the Solwise Home Plug AV unit is using Intellons INT6400 high-speed powerline chipset. With transfer rates of 200Mbps, Ethernet Home Plug AV can easily support full multimedia home networking throughout the whole house including simultaneous High Definition (HD) and Standard Definition (SD) video distribution, whole-house audio, Voice Over IP and high speed Internet in addition to data networking. It uses the power lines already installed in a home as a path to transmit digital data, voice, audio and video between devices.

Enhanced Quality of Service (QOS) also provides the guaranteed bandwidth reservations for multimedia payloads including TV over IP (IPTV), higher data rate broadband sharing, Online-Gaming, VoIP Calls, extending Wireless LANs coverage, Audio-Video transmission across the network as well as Network camera connectivity.

It is a plug, push and play solution that can be used wherever there is a wall socket, acting just like a physical network cable, streaming bandwidth to any room in the house. I t comes with a 128-bit AES encryption ensuring that your network communications is free from eavesdroppers and hackers. The Auto MDI/MDIX functionality of the Solwise Home Plug AV also simplifies and ensures a hassle free installation.

The Solwise Home Plug AV offers SimpleConnect - a simpler way to set up your Home Plug network. With just the press of a button, Home Plug AV devices can create or join a secure network. No computer is needed.

To ensure maximum security, the button on each Home Plug AV device in the network must be pushed within 2 minutes of the first one being pushed. More units can be added later, though - details are in the manual. You do not need to reset the whole Home Plug AV network.

Remember, you will need at least two HomePlug devices to form a HomePlug connection. More HomePlug AV/Gig devices can be added to further share your network. 1.8metre Network cable included.



Home Plug AV 1.0 specification
IEEE 802.3 10/100 Ethernet (100 Mbps) and IEEE 802.3u Fast Ethernet Compliant. 
10/100 Mbps Auto MDI/MDIx Support

Co-Exisits with existing 14Mbps Home Plug 1.0 and 85Mbps Turbo Home Plug 1.0 but they will not talk to each other.

These versions of the AV products will talk to other AV products so long as they are on version 3 firmware or newer.

Modulation Support OFDM 1024/256/64/16/8 QAM, QPSK, BPSK and ROBO Modulation Scheme
Frequency Band 2Mhz to 30Mhz band
Quality of Service TDMA channel access with Contention-Free and Contention-Based (CSMA/CA) period Channel Adaptation ensures that signal integrity is maintained even under harsh noise environment Four Level prioritized random access method based on contention access and multi-segment ToS and CoS Packet Classifier Supports IGMP managed multicast session
Security Support 128-bit AES Encryption with key management for secure powerline communications (Utilise Windows to enable encryption)
Hardware Intellon INT6400 Integrated Single-chip Powerline Network Transceiver
Platform Support OS Independent with TCP/IP protocol installed
Power supply Switch Mode 100V-240V
LED Indicators

1 x Power LED

1 x Powerline Link/Activity Status LED

1 x Ethernet Link/Activity Status LED

External Connectors

1 x Electrical Power plug

1 x RJ45 for 10/100 Ethernet (AutoMDI/MDI-X)

1 x reset button 1 x push button for simple connect

1 x Filtered AC Pass through

Temperature Operating : 0o to 40 o Celsius 32 o to 104 o Fahrenheit Non-Operating : -25 o to 70 o Celsius -13 o to 158 o Fahrenheit
Humidity Operating : 30% to 80% Relative Humidity (Non-Condensing) Non-Operating : 30% to 95% Relative Humidity (Non-Condensing)
Dimensions 10cm (h) x 5.5cm (w) x 4.8cm (d) - dimension do not include the pins
NOTE : Specifications are subject to change without prior notice.
User Manual Download here 04.07.11
Power Pack Utility - for setting passwords if required. It covers all Windows operating systems only. It also shows connected HomePlug and the link quality Download here 05.12.11
Declaration of Conformity Download here 27.07.11
Home Plug Alliance Technical White Paper for Home Plug AV Download  

Expert Reviews

"5 stars and Best Buy!"
Solwise Video

Networking over the Mains Product Video

Introduction to the Solwise Networking via the Mains product range

Solwise Video

Introduction to HomePlug

HomePlug, an introduction