Solwise Fibre tools and sundries

Splice Sleeves - 40mm

Splice Sleeve 1.2x40mm - Pack of 100

Pack of 100 Splice Sleeves

FB-FS-1240

Buy Now

Splice Sleeves - 60mm

Splice Sleeve 1.2x60mm - Pack of 100

Pack of 100 Splice Sleeves

FB-FS-1260

Buy Now

Light Source

A light source which generates laser-light in the ranges used for testing single mode fibre connections. Used in combination with an Optical Power Meter, losses over the fibre link can be established and verified PASS/FAIL.

Specs:
Output Wavelength(s); 1310/1550nm
Connector; SC (2.5mm ferrule),
LC (1.5mm ferrule) (with supplied adapter).
Power source; 3 x AA cell battery.

Light Source

FBT-LS1-SM

Buy Now

Visual Fault Locator Laserpen

A visual fault locator in the form of a pen. This bright red visible light source connects directly to a fibre under test. Many faults in fibre assemblies result in light leakage and show their location when connected to this tool. For instance, an over-tight bend radius will glow showing light loss.

You may wish to consider purchasing the FB-ADAP-LC-F to use with the VFL.

Specs:
Size: 175mm x 26mm dia.
Connector: SC (2.5mm ferrule),
LC (1.5mm ferrule) (with optional adapter, see above note).
Light Pattern: Flashing or continuous.
Power Source: 1 x AAA cell.
Output Power: 30mW

Laserpen

FBT-VFL1

Buy Now

Kevlar Scissors

Tough scissors for cutting and trimming distribution fiber with glass-fibre or kevlar type buffer/strength materials.

Kevlar Scissors

FBT-KS1

Buy Now

Optical Power Meter

Used with a light source to determine losses in an optical fibre connection

Specs:
Size: 190mm x 100mm x 48mm
Sensitivity; -70dBm (0.1nW)
Output Wavelength(s); 850/980/1300/1310/1490/1550nm (all modes)
Connector; SC (2.5mm ferrule),
LC (1.5mm ferrule) (with supplied adapter).
Power source; 3 x AA cell battery.

Power Meter

FBT-OPM1

Buy Now

Lint-Free Fibre Cleaning Wipes

A soft, dust-free wipe for use with a solvent such as alcohol in the cleaning of optical fibres in preparation for joining or fitting connectors.

Size: 10cm X 10cm
Quantity per pack: 300 wipes.

Cleaning Wipes

FBT-CW1

Buy Now

Cleaver

A cleaver which trims single or multi-mode optical fibre data cable to a clean, square end suitable for direct termination with a gel-filled connector. Also suitable for preparing fibre for connection in a fuser. The circular replaceable blade rotates to expose new cutting edge as required.

Specs:
Size: 63mm x 63mm x 76mm
Blade Life: 36,000 cleaves.