Discontinued Item


SAR-605EH SAR-605EH Rearview





Click the image to enlarge


ADSL 2/2+ Modem Router with HomePlug

  • Single Ethernet port
  • Texas Instruments AR7 ADSL Chipset
  • Built-in 85Mbps HomePlug using Intellon/Atheros Chipset



The SAR-605EH uses the Texas Instruments AR7 Chipset solution and fully complies with current ADSL2/2+ standards including Extended-Reach-ADSL support. HomePlug 1.0 support is provided using the industry leading Intellon INT5500CS Turbo chipset delivering up to 85 Mbps over existing electrical wiring. Remember, you will need at least two HomePlug devices to form a HomePlug connection. More HomePlug 1.0 devices can be added to further share your network.

Targeted at Residential, Small-Office-Home-Office (SOHO) and Business users, routing security is provided via double Stateful Packet Inspection and a Network-Address-Translation (NAT) based Firewall. VPN Passthrough and DMZ support provide additional security support for telecommuters as well as allowing flexibility and maintaining security against malicious hackers. 56bit DES Encryption secures communcation over the electric circuit on shared supplies. Universal-Plug-and-Play support and Multi-Port-Range/Popular-Application Forwarding makes it easy to control external access whilst maintaining good securinty.

Includes: 1.8m ADSL modem lead, 1.8m LAN cable, Setup Guide.

ADSL/ATM Support

ANSI T1.413 issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) compliant.
ADSL2, ADSL2+, RE-ADSL Compliant.
Rate Adaptive modem at 32 Kbps steps.
Dynamic Adaptive Equalisation to improve Carrier’s service area.
Bridge Tap Mitigation support.
ATM Layer with Traffic shaping QoS Support (UBR, CBR, VBR-rt, VBR-nrt).
AAL ATM Attributes - AAL5.
Multiple PVC up to 8 support .
Spectral compatibility with POTS .
F5 OAM Loopback/Send and Receive.

Home Plug Support Home Plug ® 1.01 Compliant
Home Plug 85Mbps data rates in Turbo mode (backward compatible with 14Mbps Home Plug)
CSMA/CA MAC control
OFDM, DQPSK, DBPSK, ROBO Carrier Modulation Support
4.3 Mhz to 20.9 Mhz band Frequency Band
Forward Error Correction (FEC) support
Channel Adaptation ensures that signal integrity is maintained even under harsh noise environment
CSMA/CA with prioritization and ARQ for reliable delivery of Ethernet packets via Packet Encapsulation
Four Level prioritized random access method
Segment bursting and contention-free access ensures high throughput while maintaining low latency response and jitter performance
Integrated Web Based Management
Web Based Management includes:
Local – Set the local Network Password. To show the local Home Plug MAC address.
Remote – Set the Remote Network Password using the Device ID.
Network – To display all the connected Home Plug devices (MAC addresses). To indicate the link quality (Excellent, Good, Poor or Updating)
Encapsulation Support RFC2684 Bridge and Routed LLC and VC Mux support 
RFC2364 PPPoA Client support 
RFC2516 PPPoE Client support
RFC2225/RFC1577 Classical IP Support
Transparent Bridge Support
PAP/CHAP for Password Authentication Support
Network Support Static IP, Dynamic RIP routing support
IP/TCP/UDP/ICMP/ARP Application Support
Network Address Translation (NAT)
Multi Range Port Mapping/Forwarding
Easy setup of Port Forwarding rules for popular Games/Application
NAT Application Level Gateway for popular applications
Easy Connect Support ensuring that user need not change any PC settings
DHCP Server/Relay/client
DNS Relay Agent
DMZ support
Single Session IP Sec and PPTP/L2TP VPN pass through support
PPP Always on with configurable timeout
PPP Dial on Demand
Universal Plug and Play Support
Management Support Web Based HTTP management GUI
TFTP/FTP Support for Firmware Upgrade
Web Based Firmware Upgrade (Local)
Soft Factory Reset Button via Web GUI
Telnet (Read Only)
Syslog Support
Firmware upgrade-able for future feature enhancement
Security Support NAT for basic Firewall support
Packet Filtering Firewall Support
Stateful Packet Inspection Support
Protection against Denial of Service attacks
Password Authentication to Modem
56 bit DES Encryption with key management for secure powerline communications
Hardware Texas Instrument TNETD7300 Single Chip Network Processor/AFE/Line Driver Chipset
Intellon INT5500CS MAC/PHY and INT2100 AFE Chipset
2 MB Flash ROM
Dying Gasp Support
ITU K.21 Support
Platform Support

For Ethernet : 
OS Independent with TCP/IP protocol installed. (Windows, Mac, Linux, Unix... Anything!)

Encryption passwords are set using a supplied utility which is only available for Windows. Encryption is normally required only on installations with a shared mains supply.

For USB : 

  1. Power Requirements
Input Voltage: 230VAC
Power Consumption: Approx. 7W
Frequency: 50Hz
Physical Specifications
LED Indicators : 1 x Internet (Green) LED
1 x Power (Green) LED
1 x DSL Link Status (Green) LED
1 x Home Plug Link Status (Green) LED
1 x Ethernet Link/Activity Status (Green) LED
1 x USB Link/Activity (Green) LED
External Connectors 1 x RJ-11 Telephone socket for ADSL line 
1 x RJ45 for 10/100Base-T Ethernet (AutoMDI/MDIx)
1 x USB 1.1 Type B
1 x IEC-320 C8 Power Inlet for Power Input
1 x Factory Default Reset Button
1 x On/Off Power Switch
Measurements Dimensions: 176.5 (L) x 118.9 (W) x 37.9 (H) mm
Weight: Approx. 500 g          
Regulatory Approvals
Europe CE (EN55022:98/EN55024: 98), IEC950   
Temperature Operating         :           0o to 40 o Celsius 
Non-Operating :           -25 o to 70 o Celsius
Humidity Operating                  :           30% to 80% Relative Humidity (Non-Condensing)
Non-Operating         :           30% to 95% Relative Humidity (Non-Condensing
How to save the configuration file from the Solwise SAR-60x ADSL Routers to a PC using a web browser. Download here 09.10.07
User Guide Download here  
Easy Start Guide Download here  
CE Documentation Download here 30.06.11
Solwise Video

Networking over the Mains Product Video

Introduction to the Solwise Networking via the Mains product range

Solwise Video

Introduction to HomePlug

HomePlug, an introduction