^

WI-AF-12V-FP WI-AF-12V-FP WI-AF-12V-FP WI-AF-12V-FP WI-AF-12V-FP WI-AF-12V-FP

v


<<

>>

Click the image to enlarge

QuPoE AF-12V-FP - 802.3af Splitter & Lightning arrester

QuPoE AF-12V-FP - active splitter that provides full PoE and data output protection. It is compliant with the IEEE802.3af standard. The device is ideal for outdoor applications and powering gateway devices, routers, etc.

  • Lightning/Surge/ESD Protection
  • Gigabit Ethernet
  • Dimensions: 85 x 79 x 17 mm

Buy Now

WI-AF-12V-FP

Overview

QuPoE AF-12V-FP splitter provides full PoE and data output protection. It is compliant with the IEEE802.3af standard and has a work temperature range of -40…+80C. The device has lightning, surge, ESD, EFT and power fault protection and is ideal for outdoor applications and powering gateway devices, routers, etc.

The GDT elements, SIDAC Thyristor, High power TVS Diode and TVS Diode Array provide protection against lightning and high surge. The device has overcurrent protection that complies with the GR-1089, ITU K20/21, EN60950-1 power fault requirements.

The device has 1 DC output 12VDC 1,1A (13W) overcurrent/short protection with auto restart.

Specification
Download specification datasheet
POE Specifications
IEEE Standard IIEEE 802.3ab 1000Base-T Gigabit Ethernet
IEEE 802.3af PoE (Power over Ethernet)
POE IN PD_802.3AF 12V 13W PD_802AT 12V 25W Supports both PoE A mode or B mode
Power Supply Powered from PoE in, IEEE802.3af/at 38-58V, 15W max for PD_802.3AF 38-58V, 30W max for PD_802.3AT
Data Out RJ45 10/100/1000Base-T(X)
Mechanical Specification
Operating Temperature -40 ~ 80°C
-40 ~ 176°F
Dimensions 85 x 79 x 17 mm
3.35 x 3.11 x 0.67 inch
Protection
EN 61000-4-2 (ESD) Level 4 (8kV contact, 15kV Air), Criteria B
EN61000-4-3 (RS) Level 3 (10V/m), Criteria A
EN61000-4-4 (EFT) Level 4 (4kV), Criteria A
EN 61000-4-6 (CS) Level 3, Criteria A or extended level
EN 61000-4-5 (SURGE) Level 5 (min 2kV), Criteria B (Telecommunication cables)
2 kA 8/20 μs
1 kA 10/350 μs
GR-1089 YES
ITU-T K.20 YES
ITU-T K.21 YES
IEC60950-1 YES
EN62368-1 YES

Lighting/Surge/ESD Protection Requirements

GDT elements, SIDAC Thyristor, Hight power TVS Diode and TVS Diode Array provide protection against lighting and Hight surge making the device ideal for outdoor applications and powering e.g. gateway devices, routers, etc...
Isolations Requirements The GDTs (Gas Discharge Tubes) are connected between the data pair (and not GD) to be compliant with the IEEE802.3 standard. A properly rated transformer provides the required isolation for IEEE 802.3 compliance.
Downloads
Reviews
Brochures
Videos
Accessories

<

>

X