^

WI-A140S-A WI-A140S-A WI-A140S-A WI-A140S-A

v

<<

>>

Click the image to enlarge

WI-A140S-A - QuSpot LTE omni antenna for Teltonika TRB140

QuSpot: Integrated multi-band LTE omni antenna for Teltonika TRB140 with housing (All-in-one)

  • All antennas and Teltonika router integrated in one enclosure (Router not included)
  • Outdoor antenna works in any weather conditions, IP67
  • Omni Antenna For LTE/4G Connections, frequencies covered 694~960/1700~2200/2200~2700 MHz
  • Easy to install and comes with mounting kit
  • Passive PoE support
  • Antenna perfectly matched with the router

Buy Now

WI-A140S-A

Buy Now

TL-TRB140 & WI-A140S-A

TeltonikaTRB140 Router and The QuSpot Antenna housing
(Please note this kit will show as two separate part codes in the checkout)

Overview

The QuSpot A140S-A is an omni-directional external 4G antenna that simultaneously acts as a waterproof enclosure for the Teltonika TRB140 IoT gateway/router. The A140S-A can be used in both fixed installations, such as buildings and static caravans, and mobile installations, such as boats and campervans and is very flexible in terms of positioning, since cable length isn't a factor like it is for most 4G antennas.

The A140S-A is ideal for scenarios in which an external antenna has to be mounted far away from where the accompanying router would normally be, as performance with 4G LTE devices goes down as the antenna cables get longer. Since the A140S-A acts as a waterproof enclosure for the TRB140, the router can be located right with the antenna and consequently suffers no performance degradation down the cables. This also means that standard Ethernet cables (CAT5 or CAT6) can be run from the router down to the desired network location, allowing for cable runs of up to 100 metres if necessary.

In order to supply power to the router inside the A140S-A antenna, as well as establish its connection to the network, 9-30vDC passive PoE (Power over Ethernet) should be used.

Specification
LTE Specification  
Frequency
 		 0.694 - 0.96 GHz
1.7 - 2.2 GHz
2.2 - 2.7 GHz
Supported LTE/5G bands 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 12, 13, 14, 17, 18, 19, 20, 23, 25, 26, 27, 28, 29, 30, 33, 34, 35, 36, 37, 38, 39, 40, 41, 44, 53, 59, 62, 65, 66, 67, 68, 69, 85, n80, n81, n82, n83, n84, n86, n89, n90, n95
Gain 0.694 - 0.96 GHz : 2 dBi
1.7 - 2.2 GHz : 2 dBi
2.2 - 2.7 GHz : 4 dBi
VSWR <1.60, max <2.00
Beamwidth 360°/35° +/- 5°
Polarisation Vertical
Impedance 50 Ω
Mechanical Specification  
Materials ABS, aluminium, PTFE
Connector type RJ45
Ingress Protection IP67
Dimensions 160 x 160 x 240 mm
6.3 x 6.3 x 9.45 inch
Weight 1.5 kg
3.31 lbs
Operating Temperature From -40°C to 75°C
From -40°F to 167°F
Power

PoE injector required.

eg: NET-POEADAPTSKT
Downloads
Reviews
Brochures
Videos
Video - Ep12 - A Word from the Wise – A discussion on QuWireless Antenna Enclosures for Teltonika Routers

Video: Podcast Ep12 – A discussion on QuWireless Antenna Enclosures for Teltonika Routers

Louise and Daniel discuss the QuWireless range and how the different enclosures work with the different Teltonika routers, discussing both the pros and cons of Directional Vs Omni-Directional, and the benefits of having your router housed directly inside your antenna enclosure.

Accessories

<

>

X