^

RUTX12 RUTX12 RUTX12 RUTX12 Antenna connectors

v


<<

>>

Click the image to enlarge

Teltonika Dual LTE Cat 6 Industrial Router - RUTX12

  • Two LTE modules working simultaneously can provide speeds up to 600 Mbps
  • Instant failover switching
  • 5 x Gigabit Ethernet ports with speeds up to 1000 Mbps
  • Wave-2 802.11ac Dual Band WiFi with speeds up to 867 Mbps
  • Easy to use, secure and feature rich OpenWrt based Operating System
  • Remote Management System available - click here for free demo
Do you need a fixed IP SIM?

Buy Now

TL-RUTX12

 

Buy Now

RUTX12 & WI-AX12S

Teltonika RUTX12 Router and The QuSpot Antenna housing
(Please note this kit will show as two separate part codes in the checkout)

Overview

Powerful Dual LTE Cat 6 router is designed for mission-critical applications. Two simultaneously operational LTE CAT 6 modems can provide speeds up to 600 Mbps with load balancing feature. This makes this device irreplaceable in applications where losing connection is not an option.

Remote Management System available - click here for free demo

 

Specification
Download specification datasheet
Mobile Module 2 x 4G (LTE) – Cat 6 up to 300 Mbps, 3G – up to 42 Mbps
SIM/mobile module switch 2 SIM cards, one for each mobile module, auto switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection (planned)
Status Signal strength, SINR, RSRP, RSRQ, Bytes sent/received, Mobile module in use
SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET, Email to SMS, SMS to Email, SMS to TTP, SMS to SMS, SMS auto replay, scheduled SMS (planned), SMPP (planned)
Wireless mode 802.11b/g/n/ac (WiFi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA)
Wireless Hotspot Captive portal (Hotspot), internal/external Radius server, built in customizable landing page
WAN WAN port (can be configured as LAN) 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
LAN 4 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX
Bluetooth 4.0 Bluetooth low energy (LE) for short range communication
Input voltage range 9 – 50 VDC, reverse polarity protection, voltage surge/transient protection
PoE (passive) Passive PoE. Possibility to power up through LAN1 port, not compatible with IEEE802.3af and 802.3at standards
Antennas 4 x SMA for LTE, 2 x RP-SMA for WiFi, 1 x RP-SMA for Bluetooth, 1 x SMA for GNNS
USB USB A port for external devices
Casing material Full aluminum housing
Dimensions & Weight 132 x 44 x 95 mm
540g
Downloads
Quick Set-Up Guide Download here 24.07.2020
Reviews
Brochures
4G Routers Comparison Table Click here
Videos
Article - Teltonika, Poynting and GPS – for your vehicle tracking needs, by  Louise Barrett

Article - Teltonika, Poynting and GPS – for your vehicle tracking needs, by Louise Barrett

The Teltonika RUT955 and RUT850_GPS both offer GPS functions that may be of use to vehicle owners. The integrated GNSS (GPS & GLONASS) functionality enables location tracking and logging using the Teltonika Automatic Vehicle Locator (TAVL) server. If you use the Teltonika routers acrossRUT955 your fleet you can manage them all remotely. With full support of the centralised Teltonika Remote Management System you will be able to access, control and monitor all of your routers within a single platform.
Geo-fencing functionality provides additional security – you can receive SMS/Email notifications when the device moves out of a pre-defined geographical area. The location can also be received by SMS on demand.
You are not limited to the Teltonika service, you can use other platforms such as GpsGate or similar. In the RUT routers configuration table you add the information into the GPS section – details such as APN, server address and so on.
Article - Antenna Choices for your Vehicle, by  Louise Barrett

Article - Antenna Choices for your Vehicle, by Louise Barrett

The Solwise antenna range has traditionally contained antennas that have been mounted on a pole or on a wall/building/portable building but in more recent times we are seeing more antennas used on vehicles. These include a wide range of vehicles such as cars, buses, lorries, caravans, motorhomes, boats, barges and even a space agency, an F1 team, mountain rescue teams and a defence contractor have all bought antenna hardware from us so who knows where some vehicle antenna have ended up!
Across our range we offer permanent and temporary solutions for antennas to mount on your vehicle; these antennas cover WiFi solutions and Mobile Data Solutions which means we have something for most situations.
Accessories

<

>

X