^

A-MIMO-1-1 A-MIMO-1-1 In situ A-MIMO-1-1 A-MIMO-1-1 In situ A-MIMO-1-1 In situ

v


<<

>>

Click the image to enlarge

A-MIMO-1-1

Poynting MiMO LTE vehicle antenna

  • 6.2dBi gain
  • 2 x MiMo LTE
  • Operating Frequency:
    690-960 MHz,
    1710-2700 MHz
  • Robust antenna
  • Vandal and water resistant
  • Machine-to-machine applications

A-MIMO-1-1

Buy Now
Overview

The MIMO-1-1 incorporates two LTE antennas in a single rugged low profile antenna housing. Two LTE/4G/3G antennas covering all cellular bands and also achieves MIMO data speed increases since the two antennas provide space and pattern diversity.
The antenna exceeds the performance of most competitors due to the care of attention to radiation patterns of all radiators. An
excellent compromise between omnidirectionality, pattern diversity and good radiation at low (horizontal) angles is achieved. Main
applications are for industrial vehicles, M2M and other IoT using a range of radio technologies.

Application areas:

• 4G internet on buses, trains etc
• Linking public vehicles to data networks
• Trucks, tractors and other industrial vehicles for control and communications
• M2M to ATMs, vending machines, modems, smart meters, industrial enclosures
• Asset tracking (containers etc)

Read our article - 'Antenna Considerations for 4G/LTE'

Case Study: Touring Book author replies on his Poynting Antenna to improve marginal reception while on tour in his motorhome - click here to read the article

Specification

Download Specification Datasheet including polar plots

 

Download presentation for the MiMo1 family

GSM/3G/LTE electrical specifications Frequency Band 1: 690 - 960MHz
Frequency Band 2: 1710 - 2700MHz
Gain (Max): 6.2 dBi
VSWR: <2.5:1
Feed Power Handling: 10 W
Input impedance: 50 Ohm (nominal)
Polarisation: Linear Vertical
Cable loss: 1000MHz - 0.4dB/ 1/2 m
3000MHz - 0.8dB/ 1/2 m
DC Short: Yes
Environmental Specifications Wind Survival: 160 km/h
Temperature Range (Operating): -40°C to +70°C
Environmental Conditions: Outdoor/Indoor
Operating Relative Humidity: Up to 98%
Storage Humidity: 5% to 95% - non condensing
Storage Temperature: -40°C to +70°C
Certification Approvals and Standards Cable Flammability rating: UL 94 V1 EN13823
Water Ingress Protection Ratio: IP 65 (NEMA 4X)
Impact resistance: IK 10
Salt Spray: MIL-STD 810F/ASTM B117
Product Safety: Complies with UL, CE, EN, CSA and IEC
Antenna connectors & Cable

Standard SMA plug connectors
Cable length 29cm (Including connectors)

2 x ReSMA Adapters included.

Product Dimensions (L x W x D): 252 mm x 127 mm x 55 mm
Downloads
High Resolution Images Download here 13.06.17
Reviews
Brochures
Videos
Article - Antenna Choices for your Vehicle, by  Louise Barrett

Article - Antenna Choices for your Vehicle, by Louise Barrett

The Solwise antenna range has traditionally contained antennas that have been mounted on a pole or on a wall/building/portable building but in more recent times we are seeing more antennas used on vehicles. These include a wide range of vehicles such as cars, buses, lorries, caravans, motorhomes, boats, barges and even a space agency, an F1 team, mountain rescue teams and a defence contractor have all bought antenna hardware from us so who knows where some vehicle antenna have ended up!
Across our range we offer permanent and temporary solutions for antennas to mount on your vehicle; these antennas cover WiFi solutions and Mobile Data Solutions which means we have something for most situations.
Guest Article - Choosing between a directional or an omni antenna, by  Stephen Froneman of Poynting

Guest Article - Choosing between a directional or an omni antenna, by Stephen Froneman of Poynting

The choice of omni-directional and directional antenna is not always simple. We will try to explain the key differences experienced by using a uni-directional (aka ‘directional’) antenna vs. an omni-directional (aka ‘omni’) antenna.
Accessories

<

>

X