RUT950 Package Contents Ethernet Ports Router & Power Supply (please note we are only able to supply a UK power supply with this product) Antenna Connectors and SIM slots Size scale




Click the image to enlarge

RUT950 Teltonika Dual SIM 3G/4G M2M Cat4 LTE router

  • 4G/LTE up to 150 Mbps Download and 50 Mbps Upload
  • IEEE 802.11b/g/n WiFi with 2x2 MIMO up to 300 Mbps
  • IEEE 802.3 and IEEE 802.3u standards
  • Four Ethernet ports
  • Dual SIM (does not feature aggregation - for failover only)
  • Takes standard size SIM card
  • Paired with the XPOL1 antenna from Poynting this is an ideal kit to share your 4G connection
  • Last few in stock, once they're gone they're gone - 12-month warranty for units sold from April 2024
  • Manufactured in Europe
  • Remote Management System available - click here for free demo
  • Do you need a fixed IP SIM?

    Authorised Distributor


    Buy Now


    4G-RUT950 Teltonika Router

    Buy Now

    4G-RUT950 & 12 Months Remote Management System Credits

    In the 'extra information' section on the checkout page, please provide us with an Admin email address. Teltonika RMS Info


The Teltonika RUT950 is a professional industrial 4G/LTE WiFi router for IoT applications. This rugged mobile device delivers high-performance cellular communication in harsh environments and a wide operating temperature range. It is also compatible with RMS – Teltonika‘s remote management platform that is ready to deliver the true value of M2M and IoT networking applications.

The router is equipped with four Ethernet ports, two external SIM holders, digital input/output and signal strength status LED indicators, while external SMA connectors make it possible to attach desired antennas. RUT950 is a professional LTE CAT4 router empowered by RutOS - a unified operating system for all Teltonika routers, created for the most demanding mobile networking applications. Ensure your business continuity with Dual-SIM and 4G failover.

Paired with the XPOL1 antenna from Poynting this is an ideal kit to share your 4G connection around the home/office/site. If you are sure as to where the cell tower is then the directional XPOL-2 is a good alternative to consider.

Please note we are only able to supply a Mains Adapter in UK format with this product

Remote Management System available - click here for free demo



Download specification datasheet

Click here for definitions
Europe, the Middle East, Africa, Korea, Thailand, India  Version
Version (Not suitable for USA as not FCC Compliant)
  • 4G (LTE-FDD): B1, B3, B5, B7, B8, B20
  • 4G (LTE-TDD): B38, B40, B41
  • 3G: B1, B5, B8
  • 2G: B3, B8

FDD 800/850/900/1800/1900/2100/2600 MHz

  • 4G (LTE-FDD): B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B26, B28
  • 4G (LTE-TDD): B38, B39, B40, B41
  • 3G: B1, B2, B4, B5, B6, B8, B19
  • 2G: B2, B3, B5, B8
Mobile 4G (LTE) – Cat 4 DL up to 150 Mbps, UL up to 50 Mbps; DC-HSPA+; UMTS; TD-SCDMA; EDGE; GPRS
Ethernet 4 x 10/100 Ethernet ports: 1 x WAN (configurable as LAN), 3 x LAN ports
WiFi IEEE 802.11b/g/n WiFi standards
2x2 MIMO
AP and STA modes
64/128-bit WEP, WPA, WPA2, WPA&WPA2 encryption methods
2.401 – 2.495GHz WiFi frequency range
20dBm max WiFi TX power
SSID stealth mode and access control based on MAC address
Connectors 1 x 4 pin DC, 4 x Ethernet, 2 x Mobile SMA, 2 x WiFi RP-SMA
Software OpenVPN, IPSec, GRE, L2TP, PPTP
Backup WAN
Dynamic DNS
SMS and Ping reboot, periodic reboot
Status, configuration via SMS
Send/read SMS via HTTP POST/GET
Monitoring by SNMP, SNMP trap
System log to record the status of the router
Web filter
Wireless hotspot with or without radius server
SIM card switch controlled by signal, data limit, roaming
Configuration profiles
Dual image with safemode firmware
Firmware update from bootloader via WebUI
Restore point

The RUT950 supports passive poe on lan port 1. This is NOT 48V. Voltage is 7-30VDC

PoE information

You need to supply passive poe to LAN port 1.

At the injector end you would need the POE-EPE1212 and for the power supply you could use the PSU095 mentioned on the EPE-1212 page (you could use a lower voltage but 24V will give you the longest lan cable before degradation of the power). Note poe is lan port 1 only and NOT 48V.

Electrical, Mechanical & Environmental
Dimensions (H x W x D) 100 mm x 110 mm x 50 mm
CPU 550 MHz
Weight 256g
Power supply 9 – 30 VDC, 4 pin DC connector
Power consumption < 7W
Operating temperature -20° to 55° C
Storage temperature -20° to 70° C
Operating humidity 10% to 90% Non-condensing
Storage humidity 5% to 95% Non-condensing
EU Declaration of Conformity MIEG Chipset version Download here 21.07.2022
UK Conformity Assessment (UKCA) MIEG Chipset version Download here 21.07.2022
EU Declaration of Conformity QUEC Chipset version Download here 21.07.2022
UK Conformity Assessment (UKCA) QUEC Chipset version Download here 21.07.2022
Setting up your Teltonika router to use the second SIM slot Download here 17.08.2023
How To Set-up Multiple WANs In Teltonika Routers Download here 23.12.2020
Guide: How to bridge to an existing wireless network Download here 04.03.20
Guide:  Configuring Event reporting emails to work with Gmail. Download here 25.10.19
Latest firmware can be found on the Teltonika website Click here 16.07.19
Guide: How to Set Up Bridge Mode Using a Teltonika RUT950 Router Download here 07.08.19
User Manual Download here 31.07.19
Quick Start Guide Download here 31.07.19
High resolution images Download here 01.07.19
Setup Guide for OpenVPN Download here 20.01.15
Ofcom’s Mobile Coverage Checker provides a single-stop for consumers and businesses across the UK to discover the quality of the mobile coverage in areas where they live, work or intend to move. Click here 13.08.15
Teltonika Networks use case catalog Download here 02.09.21
PC Advisor

(Get Your) Legs Down



Read the article here
Independent product review by Richard Easy at (Get Your) Legs down of the Teltonika RUT950 and the Poynting XPOL-A0001.

'It is without doubt an exceptionally powerful and versatile device.'

'This may be a solution for anyone that wants to get connected on their seasonal pitch or holiday home when Wi-Fi isn't available.'

Remote Managemant System Explained

Remote Management System Explained

Teltonika’s Remote Management System (RMS) is a powerful online IoT platform, allowing users to remotely monitor and manage all their compatible Teltonika devices. From 4G routers to IoT gateways to Access Points, RMS can be used to control a wide variety of Teltonika devices with great convenience.

Mounting Options for Teltonika Devices

Video: Mounting options for Teltonika Devices

A variety of options for mounting your Teltonika device.

4G & 5G Podcast

Video Podcast - Episode 3

Episode 3 covering the acronyms and letters surrounding 4G and 5G and what their meanings are. Where does LTE fit in? What are category classifications and their download speeds? How many antennas on a mobile router? Would you be better off with a higher category 4G router than investing in a 5G router? Steve and Louise also discuss antenna cable and the losses involved with having a too long cable which leads on to conversation about the new Teltonika networking range.

LTE Router Classifications

LTE Router Classifications