^

4G-REN6727009XPS Two x 10m lead with SMA connectors Mounting bracket kit

v

<<

>>

Click the image to enlarge

4G-REN6727009XPS - Discontinued Item

2x12dBi Panel for 4G/LTE and 3G

  • Covers all UK and EU LTE (4G) bands
  • Dual polarised 12dBi panel
  • Pole mounting kit included
  • Two x 10m lead with SMA connectors
Overview

An outdoor high gain directional antenna suitable for all of the UK (and EU) LTE/4G frequency bands. Suitable for all UK operators for either 3G or 4G operation. Offers significant improvement above the standard antenna used on general indoor dongles or routers. Needs to be mounted where the antenna will receive a good signal from the transmitter mast. Note a directional antenna should ONLY be used where the antenna has direct (uninterrupted) line of site to the mast. If you don't have line of site then an omni antenna is preferred. An RF, antenna cable will also be required to run from the antenna to the radio device. Note this antenna has two connectors so it should be used for LTE/4G radio devices with twin external aerial connections.

 

Read our article - 'Antenna Considerations for 4G/LTE'

Specification
Download specification datasheet
Frequency Range 698~960 MHz 1710~2170MHz 2300~2700
Gain (dBi) 8 dBi 8.5 dBi 9 dBi
VSWR ≤ 2.5 : 1
Polarisation + / - 45 degree
Horizontal Beamwidth 80° 70° 65°
Vertical Beamwidth 55° 53° 52°
Front to Back Ratio ≥ 25 dB
Max. Input Power 100 Watt
Impedance 50 Ω
Cable + connector 2x 10 mtr LMR 200 + SMA
Dimensions (approx) 265 x 265 x85 mm
Weight (approx) 1.8 Kg
Rated wind velocity 210 Km / hr
Mast Diameter Ф 30 ~ 50 mm
Downloads
Reviews
Brochures
3G & 4G Directional Antennas
Comparison Chart		 Download here 07.11.14
Videos
Accessories

<

>

X