Discontinued Item

^

Antenna Antenna Rearview Antenna Connector - SMA Plug Mounting bracket

v

ADSL-DL4323D

<<

>>

Click the image to enlarge

4G-REN67027012X

2 x 12dBi Panel Antenna for 4G/LTE and 3G

  • Covers all UK and EU LTE (4G) bands
  • Dual polarised 12dBi panel
  • Pole mounting kit included
  • Two x 10m lead with SMA connectors

4G-REN67027012X

Overview

An outdoor high gain directional antenna suitable for all of the UK (and EU) LTE/4G frequency bands. Suitable for all UK operators for either 3G or 4G operation. Offers significant improvement above the standard antenna used on general indoor dongles or routers. Needs to be mounted where the antenna will receive a good signal from the transmitter mast. Note a directional antenna should ONLY be used where the antenna has direct (uninterrupted) line of site to the mast. If you don't have line of site then an omni antenna is preferred. An RF, antenna cable will also be required to run from the antenna to the radio device. Note this antenna has two connectors so it should be used for LTE/4G radio devices with twin external aerial connections.

 

Read our article - 'Antenna Considerations for 4G/LTE'

Specification
Frequency Range 698~960 MHz 1710~22700MHz
Gain (dBi) 10.0 dBi 12.0 dBi
VSWR ≤ 2.5 : 1
Polarisation XPOL + / - 45 degree
Horizontal Beamwidth 80° 65°
Vertical Beamwidth 55° 52°
Front to Back Ratio ≥ 25 dB
Max. Power 100 Watt
Impedance 50 Ω
Cable + connector 2x 10 mtr LMR 200 + SMA
Dimensions (approx) 265 x 265 x85 mm
Weight (approx) 0.54 Kg
Rated wind velocity 210 Km / hr
Mast Diameter Ф 30 ~ 50 mm
Downloads
Reviews
Brochures
Videos
Accessories

<

>

X