Discontinued Item

3.5G plus WLAN mobile Server Router

Wall mounted, via its integrated mains plug, this router accesses the internet using the USB dongle suplied by your mobile service provider. The service is
then available to share via ethernet or the integrated 802.11g Access Point. A Fail-Back mode is available to automatically back up a fixed internet connection
when that service is interrupted.

Ideal for Mobility or Backup of Fixed Broadband Solution
Friendly Easy Setup utility and intuitive web configuration
Secure Data Sharing: File, Picture, Video, Audio...etc
USB Device Sharing - 3.5G Dongle, Printer, Webcam, HDD and Flash
Firewall and Wi-Fi Security - complete defense system set your mind free of worry
Efficient Bandwidth Usage - QoS ensures to optimize the bandwidth use
User Account Management - webpage user interface, define user authorization, Event Log and Email Alert

If your provider does not supply information on setting up your dongle with a router see our instructions below for setting up the router to connect to your
3G supplier.

Solwise 3G-3GWIFIMRW Router
Click in image to see a larger view
Application 1
Application 2
Split View of the Solwise 3G Router

Split view without the attachment

Split View
Without Plug attachment
Bottom view of the Solwise 3G Router
Bottom View
Click on images to see a larger view
Standards Mobile: HSDPA/ UMTS/ W-CDMA
WLAN: IEEE 802.11g/b
LAN: IEEE 802.3 10 Base-T Ethernet, IEEE 802.3u 100 Base-TX Fast Ethernet
Data Rates Wireless: 802.11g (up to 54Mbps), 802.11b (up to 11Mbps)
802.3/802.3u: 10/100Mbps
3.5G: Up to 3.6Mbps (Backward compatible to 3G/ 2.75G/ 2.5G)
Frequency Range 2.412 ~ 2.484GHz
Transfer Protocol TCP/IP
Operation System Windows / Mac
Antenna Built-in Antenna, 2dBi@2.45GHz
Slide Switch 1 slide switch for 3 modes selection, Router/AP/Client

2 x USB 2.0 ports

Easily expanded by using a powered USB hub

Ethernet 2 x 10/100Mbps Auto-MDI/MDI-X RJ-45 Ethernet ports
Power Plug 100V ~ 240V Input
Reset Button 1 reset button for resetting to factory default
Dimension 91 x 78 x 30mm (3.6 x 3.1 x 1.2 inch)
Security WEP, WPA, WPA-PSK, TKIP, 802.1x Authentication
Firewall URL, IP, MAC Filter, SPI (Stateful Packet Inspection), DoS
Network Features WAN: DHCP, Static IP, PPTP, PPoE, HSDPA/ UMTS
Routing: UPnP, DHCP, DDNS, DNS
QoS: 3-level priority
NAT: Virtual Server/ DMZ
Management Easy Setup utility, Firmware upgrade via web, Remote management, NAT Travel User Account Management, Administrator & Personal Panel, UPnP setting, Folder Management/Backup, E-mail alert, Event Log
Safety Emission FCC, CE, RoHS
Application Management
Webcam Server Webcam view via browser by internet real time
Picture monitor from LAN/WAN PC
Picture recording to FTP server or USB HDD
Printer Server Printer Via WAN/LAN PC
Printer Sharing
Samba Server File Sharing - generally only available on business versions of Vista and Windows7 rather than home versions. Check with your supplier.
FTP Server Anonymous login / User login
Press Mentions
Tech Radar
TechRadar / PC Plus
Click for review 14.01.10
Web User Click for PDF 26.03.09
The Register Click for review 13.03.09
What PC? Click for PDF 23.10.08

Personal Computer World
4 out of 5 starts overall
5 stars for good value for money

Click for review 23.10.08
Web Active Click for PDF 23.10.08
VNUnet Click for PDF 23.10.08
PC Magazine Click for PDF 23.10.08
Financial Director Click for PDF 23.10.08
Web User
Router makes it to the most wanted list
Click for review 18.09.08
Firmware: Ver 2.1.18_b1
Adds support for ZTE MF636 model (as used by Orange) and the Huawei E1550.
(file name )
Download here 24.08.09
Firmware: Ver 2.1.17
Adds support for  Ovation MC930D as used by O2
Click here for details and instructions
You will need the serial number and model number from the label on the unit
Firmware: Ver2.1.17_b7
Adds support for E160X and also the GIO431
Firmware: Ver2.1.17_b5
No changes except it has added the following modems: Qisda H21, StarHub ZTE MF626, and ZTE MF636 3.5G dongle.

Firmware Ver 2.1.13
Fixes disconnect issues that some users have found

Firmware Ver 2.1.11
Adds support for ICON225 dongles used by Orange (full release of previous beta)
Beta Firmware Ver 2.1.10 Beta6
Adds support for the ICON225 dongle as used by Orange
Firmware Ver 2.1.10
Fixes problem with auto switch from a public IP.
Firmware ver 2.1.9 - allows more USB dongle models to be used 11.11.08
Instructions for setting up the router to connect to your 3G supplier Download here 29.10.08
Quick Set up Guide Download here 20.08.08
User Manual Download here