







NET-EL-EOC-2611P
EnGneius Long range outdoor wireless Access Point / Client Bridge
- Operates seamlessly in the 2.4GHz frequency spectrum
- High bandwidth up to 108Mbps with Super G
- Dual Polarisation antenna with high transmitted output power and high receivable sensitivity
- DD-WRT.
Overview
The EnGenius EOC-2611P is a long range outdoor wireless Access Point / Client Bridge that operates seamlessly in the 2.4GHz frequency spectrum and provides high bandwidth up to 108Mbps with Super G. With dual Polarisation antenna, it features high transmitted output power and high receivable sensitivity. High output power and high sensitivity can extend range and coverage to reduce the roaming between Access Points to get a more stable wireless connection. It also reduces the expense of equipment in the same environment.
The EOC-2611P supports distance control from 1km to 30km and has an RSSI indicator which enables the best transmit and receive signals for traffic communication. This product comes with a Power over Ethernet injector for using in an outdoor environment easily.
To protect your wireless connectivity, it can encrypt all wireless transmissions through 64/128-bit WEP data encryption and also supports WPA/WPA2. The MAC address filter lets you select exactly which stations should have access to your network. In addition, the User Isolation function can protect the private network between client users.
The attractive design, high performance, and array of features make EOC2611P a suitable wireless solution for your home or office, or for linking buildings wirelesslly.
EnGenius covers this product with a 2 year manufacturer's warranty.
Specifications
| Download specification datasheet (includes polar plots) | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Features | |||||||||||
| Wireless | - 2.4GHz It works in 2.4GHz frequency spectrum - High output power Transmit high output power programmable for different country selections - High Data Rate High speed transmitting rate up to 108Mbps with Super G, support large payload such as MPEG video streaming - Multifunction application Access Point/Client Bridge/Client Router/WDS Function - Long range transmitting Transmit power control and distance control (ACK timeout) - Narrow Bandwidth Provide 5MHz/10MHz/20MHz bandwidth selection - Signal Strength Display RF signal strength status shown LEDs of 3 colors, making network build-up easier. LED indicators have the best transmit and receive signal for traffic communication - Multiple SSID 4 SSID supported. Each SSID can set itself wireless or WAN access setting. QoS(WMM) Enhance performance and density |
||||||||||
| DD-WRT is available for the 2611P but please take note that no support will be given when the unit is flashed with 3rd party firmware. | |||||||||||
| Networking | - PPPoE Point-to-Point Protocol over Ethernet at Client Router mode. This function will keep trying when failed or disconnected - PPTP Point-to-Point Tunneling Protocol (PPTP) is a method for implementing virtual private networks - VPN Pass Through |
||||||||||
| Security | - 802.11i WEP, WPA, WPA2 (Encryption support TKIP/AES) - MAC address functions MAC address filter (AP mode) - 802.1x IEEE802.1x Authenticator - Station isolation L2 Isolation |
||||||||||
| Management | - Firmware Upgrade Upgrading firmware via web browser, setting are reserved after upgrade - Reset & Backup Reset to factory default. User can export all setting into a file via WEB - Ping & Trace Route Built-in PING function & Trace Route function in Web GUI - MIB MIB I, MIB II(RFC1213) and Private MIB - SNMP V1, V2c |
||||||||||
| Hardware Specification | |||||||||||
| MCU/RF | Atheros AR2316 Single Chip | ||||||||||
| Memory | 32MB SDRAM | ||||||||||
| Flash | 8MB | ||||||||||
| Physical Interface | One 10/100 Fast Ethernet RJ-45 One Reset Button One SMA Connector One switch (external and internal antenna switching) |
||||||||||
| LED indicators | Power/ Status LAN (10/100Mbps) WLAN (Wireless is up) 3 x Link Quality (Client Bridge mode) - Green: Good Quality - Yellow: Marginally Acceptable Quality - Red: Bad Quality |
||||||||||
| Power Requirements | Active Ethernet (Power over Ethernet) Proprietary PoE design Power Adapter 24V / 0.6A DC |
||||||||||
| Regulation Certifications | FCC Part 15C/15B, EN 300 328, EN 301 489-1/-17, EN60950 | ||||||||||
| RF Specification | |||||||||||
| Frequency Band | 802.11b/g 2.412~2.472GHz |
||||||||||
| Operating Channels | 802.11b/g 11 for North America, 14 for Japan, 13 for Europe |
||||||||||
| Receive Sensitivity (Typical) | 802.11g -92 dBm @ 6Mbps -74 dBm @ 54Mbp |
802.11b -97 dBm @ 1Mbps -89 dBm @ 11Mbps |
|||||||||
| Estimated Transmission Distance using built-in 10dBi antenna Distances and throughputs are estimations based upon 'ideal' conditions with clear line of site. Actual throughput may also be limited by LAN performance. |
|
||||||||||
Downloads
| MiB File | Download here | 19.10.10 |
| Firmware ver 1.3.1 | Download here | 04.10.10 |
| Locator (Locate IP and Remote Reset) | Download here | 27.01.11 |
| NMS for Vista and Windows 7 version 3.1e | Download here | 27.01.11 |
| EnGenius MESH Installer version (for windows XP 3.1e) | Download here | 27.01.11 |
| Declaration of conformity | Download here | 27.07.11 |
| User Manual | Download here | 27.01.11 |



