Set-up video
Video for the EOC-5610 but the same set-up for the EOC-5611P
NET-EL-EOC-5611P
EnGenius Dual Polarisation Outdoor Access Point
- Outdoor Access Point/Client Bridge
- 14Dbi gain Dual Polarisation Panel Antenna
- 802.11 a
- 5GHz
- Band C (IR2007) and Band B (IR2006)
Overview
The EOC-5611P is a long range outdoor wireless Access Point / Client Bridge that operates in the 5GHz frequency. It conforms to the UK Legal requirements for operation in 5GHz Band C (IR2007) and also 5GHz Band B (IR2006).
It provides high bandwidth up to 54Mbps and features a dual polarization antenna with high transmitted output power as well as superior sensitivity. The EOC-5611P extends radio coverage, avoids unnecessary roaming between Access Points and ensures a stable wireless connection whilst reducing the number of required devices.
The EOC-5611P has a user friendly interface including distance control ranges from 1KM up to 30KM and a RSSI LED indicator offering real time signal status. It comes with a Power over Ethernet injector for convenient outdoor installation.
The EOC-5611P enforces transmission security with full support of the latest security encryption including 64/128-bit WEP, WPA and WPA2.
With a 14dBi internal antenna and superior performance the EOC-5611P makes an excellent wireless solution for both small and large scale projects.
The EOC-5611P is despatched from Solwise with UK legal firmware. EnGenius cover this product with a 2 year manufacturer’s warranty.
Link to Ofcom faq site for 5GHz operation - 5.8GHz FWA
Specifications
| Download specification datasheet which includes polar plots | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wireless | It works in 5GHz frequency spectrum High output power Transmit output power programmable for different country selections High Data Rate High speed transmitting rate up to 54Mbps, supports large payload such as video streaming Multifunction application Access Point/Client Bridge/Client Router/WDS AP/WDS CB Long range transmitting Transmit power control and distance control (ACK timeout) Signal Strength Display LED indicators have the best transmit and receive signal for traffic communication. And RF signal strength status shown LEDs of 3 colors, making network build-up easier Narrow Bandwidth Provide 5MHz/10MHz/20MHz bandwidth selection. Multiple SSID 4 SSID supported. Each SSID can set itself wireless or WAN access setting. QoS(WMM) Enhance performance and density |
||||||||||||
| Networking | PPPoE Point-to-Point Protocol over Ethernet at Client Router mode. This function will keep trying when failed or disconnected PPTP Point-to-Point Tunneling Protocol (PPTP) is a method for implementing virtual private networks VPN Pass Through |
||||||||||||
| Security | 802.11i WEP, WPA, WPA2 (Encryption support TKIP/AES) MAC address functions MAC address filter (AP mode) 802.1x IEEE802.1x Authenticator Station isolation L2 Isolation |
||||||||||||
| Management | Firmware Upgrade Upgrading firmware via web browser, setting are reserved after upgrade Reset & Backup Reset to factory default. User can export all setting into a file via WEB MIB MIB I, MIB II(RFC1213), Private MIB SNMP V1, V2c |
||||||||||||
| Hardware Specifications | |||||||||||||
| MCU/RF | Atheros AR2313+AR5112 | ||||||||||||
| Memory | 32MB SDRAM | ||||||||||||
| Flash | 8MB | ||||||||||||
| Physical Interface | 1 x 10/100 Fast Ethernet RJ‐45 1 x Reset Button 1 x Antenna Switch ( Internal and External Switch ) 2 x Reverse SMA Connector |
||||||||||||
| LED indicators | Power/ Status LAN (10/100Mbps) WLAN (Wireless is up) 3 x Link Quality (Client Bridge mode) • Green: Good Quality • Yellow: Marginally Acceptable Quality • Red: Bad Quality |
||||||||||||
| Power Requirements | Active Ethernet (Power over Ethernet) Proprietary PoE design Power Adapter 24V / 1A DC |
||||||||||||
| Regulation Certifications | FCC Part 15C/15B/15E, EN301 893, EN 300 328, EN 301 489-1/-17, EN60950, IC Certification |
||||||||||||
| RF Specifications | |||||||||||||
| Frequency Band | 802.11a = 5.150~5.350GHz, 5.470~5.725GHz, 5.725~5.825GHz | ||||||||||||
| Modulation Technology | OFDM = BPSK, QPSK, 16‐QAM, 64‐QAM DSSS = DBPSK, DQPSK, CCK |
||||||||||||
| Receive Sensitivity (Typical) | 802.11a ‐92dBm @ 6Mbps, ‐73dBm @ 54Mbps |
||||||||||||
Maximum transmit power Please note that the transmit power is limited to 16dBm when set to country code UK Band B operation and to 22dBm when set to UK Band C. |
|
||||||||||||
| Estimated Transmission Distance using built-in 14dBi antenna Distances and throughputs are estimations based upon 'ideal' conditions with clear line of site at UK legal EIRP levels. Actual throughput may also be limited by LAN performance. |
|
||||||||||||
| Internal Antenna |
|
||||||||||||
Downloads
| Firmware ver 1.3.3 | Download here | 27.01.11 |
|---|---|---|
| EnGenius Private MIB File | Download here | 27.01.11 |
| Locator (Locate IP and Remote Reset) | Download here | 27.01.11 |
| NMS for Vista and Windows 7 version 3.1e | Download here | 27.01.11 |
| EnGenius MESH Installer version (for windows XP 3.1e) | Download here | 27.01.11 |
| Declaration of Conformity | Download here | 29.07.11 |
| Quick Set Up Guide | Download here | 27.01.11 |
| User Manual | Download here | 27.01.11 |
Press Reviews
Videos
