Javascript Menu by Deluxe-Menu.com Wireless Antenna Sundries Specifications

 

Solwise
Home Networking, Wide Area WiFi, ADSL, VoIP, Digital Media, Comms, Advice....

Click here

Finder your local Solwise dealer

Menu Spacer
Menu Spacer
Antenna Sundries Specifications

 

Lightning Arrestor
Frequency Range: DC-2500 MHz
Special Impedance 50Ohm
Insert Loss 0.2 dB
VSWR 1.2
Rated Power 200W
Discharge Voltage DC230V +/- 15%
Insulation resistance 10,000m (DC100V)
Connector Type N plug to N socket
Dimmensions in mm 58 x 35 x 25
Weight 140g

 

 

2.4GHz 2way Outdoor Splitter

Frequency Range

2400-2500 MHz

Insertion Loss/ dB
(including splitting)

3.5

Isolation

> 20 dB

VSWR

< 1.35

Impedance

50 Ohm

Connector Type

N-female

Max.Power/ W

25W

Temperature

-30-60 Celcius

Humidity

5-95%

Dimension/ mm

62×55×19

Weight

170g

 

2.4GHz 3way Outdoor Splitter

Frequency Range

2400-2500 MHz

Insertion Loss/ dB
(including splitting)

5.4

Isolation

> 20 dB

VSWR

< 1.35

Impedance

50 Ohm

Connector Type

N-female

Max.Power/ W

25W

Temperature

-30-60 Celcius

Humidity

5-95%

Dimension/ mm

71×60×19

Weight

220g



2.4GHz 4way Outdoor Splitter

Frequency Range

2400-2500 MHz

Insertion Loss/ dB
(including splitting)

6.6

Isolation

> 20 dB

VSWR

< 1.35

Impedance

50 Ohm

Connector Type

N-female

Max.Power/ W

25W

Temperature

-30-60 Celcius

Humidity

5-95%

Dimension/ mm

104×74×19

Weight

370g

 

 

Indoor 0.1W (20dB) Booster for 2.4GHz Wireless LAN
Frequency: 2.4~2.5GHz
Operating Mode: Bi-directional, half-duplex Time Division Duplex SensesRF carrier from Transmitter and automatically switches Receive to transmit mode
Transmit Gain: 17dB Nominal
Frequency Response: +\-1dB over operating range
Output Power: 100mw(+20dBm) nominal
TX Input Power: 10dB Nominal
Receiver Gain: 10dB typical
Noise Figure: 3.5dB typical
Connectors: SMA female pin to radio, reverse-SMA male pin to antenna
(Please note, no pigtail is included with the booster. If you require a pigtail click here)
Lightning Protection: Direct DC ground at antenna connector
DC Surge Protection: At 5 VDC input from transmission cable
Power Consumption: 650mA @ 5V/DC 105~240V AC from power supply
Dimensions: 78(L)mm x 55(W)mm x 29(H)mm
Operating Temperature: -20°C ~ +70°C
Humidity: Up to 100 Relative Humidity

 

WiFi Detector Specifications
PheeNet Wi-Fi Detector with 802.11b/g Wireless USB. This convenient device instantly detects wireless hotspots and available Wireless AP anywhere. The backlight LCM display tells the user detailed information about any detected hotspot and available Wireless AP. There¡¦s no need to purchase any battery because there is a rechargeable Li-Polymer battery which recharges whenever the detector is inserted into any USB port.

This Wi-Fi detector also allows the user to go online wirelessly and is designed to comply with IEEE 802.11b/g Wireless LAN standard. It is suitable for any laptop or desktop computer.

This detector supports 64/128/256-bit WEP data encryption that protects your wireless
network from eavesdropping. It also supports WPA (Wi-Fi Protected Access) and WPA2 that combines IEEE 802.1x and TKIP (Temporal Ke y Integrity Protocol) technologies. Clients are required to authorize before accessing to APs or AP Routers, and the data transmitted in the network is encrypted/decrypted by a dynamically changed secret key. This adapter has built-in AES engine which ensure the highest degree of security and
authenticity for digital information and it is the most advanced solution defined by IEEE
802.11i for the security in the wireless network.

Definitely for engineers or hotspot users, it is a very user-friendly tool to survey and use existing Wireless LAN.
 
l. WiFi Detector, which with LCM displays: SSID, Signal Strength, Network type (802.11b/g), Network Mode (infrastructure, Adhoc), Operating channel, Number of APs detected, Battery strength, Link/Act indicator)
2. Compatible with the IEEE 802.11b and IEEE 802.11g 2.4GHz standards
3. Compatible with USB Rev 2.0 / 1.1
4. Supports TKIP, WPA, IEEE802.11i enhanced security
5. Supports Software AP function, which turns the wireless station into a wireless AP
6. Support the most popular operating system: Windows 98SE/Me/2000/XP
Download specification datasheet
Industrial Standard

Standard

IEEE802.11b/g
Interface USB2.0, USB1.1 compliant
Security 64/128/256-bit WEP
WPA/WPA2 (TKIP with IEEE 802.1x) and AES
RF
Frequency Band 2.4000~2.4835GHz (Industrial Scientific Medical Band)
Signal Type IEEE802.11g: OFDM
IEEE802.11b: DSSS
Modulation 802.11g: OFDM (64QAM, 16QAM, QPSK, BPSK)
802.11b : DSSS(CCK, DQPSK,DBPSK)
Antenna Internal Antenna
Sensitivity 1 Mbps- G-88dBm
2 Mbps - G-83dBm
5.5 Mbps - G-79dBm
11 Mbps - G-70dBm
12 Mbps - G-76dBm
24 Mbps - G-71dBm
36 Mbps - G-67dBm
54 Mbps - G-62dBm
Output Power 802.11b: 18dBm
802.11g: 16dBm
Hardware
Compatibility Windows 98SE/ME/200/XP, WinXP64 CPU 64(bit)Frame
LCM Size 96x32 with EL backlight
Battery 4.2V Rechargeable Li-Polymer Battery
Environment Operating Temperature :0~60°C
Storage Temperature : -20 ~ 70°C
Humidity: 10%~85% (Non-Condensing)
Dimensions 91 (L) x 28.5(W) x 14(H) mm
Certificate FCC,CE
CD Contents
Including Quick Set Up Guide, user manual, setup utility & drivers
Download here
Vista Drivers Download here

 


Sitemap
Site Map

ADSL | SDSL | Networking Copper | HomePlug/Powerline |Routers | Telecoms |Voice over IP |
WebCams
| Wireless Networking | Wireless 2.4GHz 11n Hardware | Wireless 2.4 GHz 54g hardware | Wireless 5 GHz Hardware | Sitemap |


Solwise Ltd,17 Priory Tec Park, Saxon Way, Hessle, HU13 9PB.
Tel: Sales & Pre-Sales advice: 0845 458 4558 After Sales Technical Support: 0845 458 5819 / (01482) 644938
Fax: 0845 458 4559
Email:

PCA Brigantia Associate Integra

Solwise Ltd is a company registered in England and Wales with company number 2621504
VAT number GB552 0095 70, WEEE Producer Registration Number, WEE/CF0067TX