Powered by Senao

The ECB9500 is a powerful, multi-functioned 11n product. The ECB9500 is an Access Point that delivers up to 6 times faster speeds and 7 times extended coverage than 802.11g devices. The ECB9500 supports the home network with superior throughput, performance and unparalleled wireless range. The ECB9500 has a user-friendly WPS function which helps users to connect to other wireless devices simply with one push of a button.

To protect data during wireless transmissions, the ECB9500 encrypts all wireless transmissions through WEP data encryption and supports WPA/WPA2. The ECB9500 also supports IEEE 802.1x Supplicant function in Client Bridge mode.

Click on image to see a larger view

Stock Code Price (inc. VAT) More... NET-EL-ECB9500 (Mfr part code: ECB9500) NET-POEINJECT48

General Specifications
Download specification datasheet
Click on images to see a larger view Bottom View Antenna Connector Front View
Hardware Summary
Physical Interface	LAN: One 10/100/1000Mbps Reset Button Power Jack WPS push button (Wi-Fi Protected Setup)
LEDs Status	Power/ Status LAN (10/100/1000Mbps) WLAN (Wireless Connection)
Power Requirements	Active Ethernet (Power over Ethernet, IEEE802.3af)- 48 VDC/0.375A Device: 12V/1A
Regulation Certifications	FCC Part 15/UL, CE
RF Information
Frequency Band	2.400～2.484 GHz
Media Access Protocol	Carrier sense multiple access with collision avoidance (CSMA/CA)
Modulation Technology	- OFDM: BPSK, QPSK, 16-QAM, 64-QAM - DBPSK, DQPSK, CCK
Operating Channels	11 for North America, 14 for Japan, 13 for Europe
Receive Sensitivity (Typical)	- IEEE802.11n MCS8 @ -91dBm MCS15 @ -74dBm - IEEE802.11g (3RX) 6Mbps@ -92dBm 54Mbps@ -75dBm - IEEE802.11b (1RX) 1Mbps@ -93dBm 11Mbps@ -91dBm
Available transmit power	- IEEE802.11n/g 19dBm@6~9 Mbps / MCS9 18dBm@12~18 Mbps / MCS11 17dBm@24~36 Mbps / MCS13 16dBm@48~54 Mbps / MCS15 - IEEE802.11b 18dBm@1, 11Mbps
Antenna x 3	Omni-directional external antenna Reverse TNC type; Peak Gain = 5 dBi
Software Features
Topology	Infrastructure
Operation Mode	Client Bridge / Access Point / WDS AP / WDS Bridge / Client Router / Router / Universal Repeater
LAN	DHCP Server DHCP Client
Wireless	Wireless Mode – 11b / 11g / 11n / Disable Channel Selection (Setting varies by Country) Transmission Rate 11 b/g: 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 in Mbps 11n: MCS Index Guard Interval 800ns Guard Interval 400ns 20MHz (Mbps) 40MHz (Mbps) 20MHz (Mbps) 40MHz (Mbps) 0 6.5 13.5 7.2 15 1 13 27 14.4 30 2 19.5 40.5 21.7 45 3 26 54 28.9 60 4 39 81 43.3 90 5 52 108 57.8 120 6 58.5 121.5 65 135 7 65 135 72.2 157.5 8 13 27 14.4 30 9 26 54 28.9 60 10 39 81 43.3 90 11 52 108 57.8 120 12 78 162 86.7 180 13 104 216 115.6 240 14 117 243 130 270 15 130 270 144.4 300 Signal Strength Bandwidth Selection- 40/20 MHz for 11n
Security	WEP Encryption-64/128 bit WPA Personal (WPA-PSK using TKIP or AES) WPA Enterprise (WPA-EAP using TKIP) 802.1x Authenticator 802.1x Supplicant- MD5/TTLS (CB & CR mode) Hide SSID in beacons Multiple SSID with 802.1q VLAN tagging (up to 4 SSIDs) in AP mode MAC Filter(AP mode) WLAN L2 isolation(AP mode) Wireless STA (Client) connected list (Idle/Connection Time, Pkt statistics)
QoS	WMM
Management
Configuration	Web-based configuration HTTP / Telnet
Firmware Upgrade	Upgrade firmware via web-browser Keep latest setting when f/w update
Administrator Setting	Administrator password change
Reset Setting	Reboot (press 1 second) Reset to Factory Default (press 10 second)
System monitoring	Status, Statistics and Event Log
SNMP	v1, v2c
MIB	MIB I, MIB II (RFC1213) and Private MIB
Traffic Measurement	Per interface
Bandwidth Measurement	IP range and bandwidth management
Backup & Restore	Settings through Web
Environmental
Temperature Range	Operating: 0°C to 45°C (32°F to 113°F) Storage: -20°C to 70°C (-4°F to 158°F)
Humidity (non-condensing)	5%～95% typical
Dimensions	125mm (L) x 108mm (W) x 31mm (H)
Weight	350g